Manufacturers
ASTEC LPS118-B
Description
ASTEC-LPS118-B-POWER SUPPLY 110W 48V 1.7A W/BRKT
Part Number
LPS118-B
Price
Request Quote
Manufacturer
ASTEC
Lead Time
Request Quote
Category
Power Supply Board
Specifications
52.8VDC
@2.3A
Adjustment range
±5% minimum
Efficiency
70% typical at full load
Frequency
47-440 Hz
Hold-up time
20 ms @80 W load, 115 VAC nominal line
Input (PS)
85V to 264V
Input Range
85-264 VAC 120-300 VDC
Operating Temperature
0 to 70C
Overload protection
Short circuit protection Case overload protected @ 110-145%
Performance Characteristics
Single
Total Max Current
6.7A
Volume
4.000"x7.000"x1.800"
Features
- Adjustable output
- Built-in EMI filter
- Cover kit available LPX110-C
- High efficiency
- Low output ripple
- Optional L bracket (-B suffix)
- Overload protection
- Overvoltage protection
- Power fail
- Remote sense
- Universal input
Datasheet
Extracted Text
Total Power: 80-110 Watts Input Voltage: 85-264 VAC 110 Watts 120-300 VDC # of Outputs: Single LPS110 Series Electrical Specs Input Input range 85-264 VAC 120-300 VDC Frequency 47-440 Hz Inrush current <18 A peak @ 115 VAC; <36 A peak @ 230 VAC, cold start @ 25°C Input current 2.5 A max. (RMS) @ 115 VAC Efficiency 70% typical at full load EMI filter FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Special Features Safety ground • Universal input leakage current <0.5 mA @ 50/60 Hz, 264 VAC-input • High efficiency Output • Remote sense • Built-in EMI filter Maximum power 80 W for convection; • Low output ripple 110 W with 30 CFM forced air • Adjustable output Adjustment range ±5% minimum •Power fail Hold-up time 20 ms @80 W load, 115 VAC nominal • Overvoltage protection line • Overload protection • Optional L bracket (-B suffix) Overload protection Short circuit protection. Case overload • Cover kit available LPX110-C protected @ 110-145% above peak rating Overvoltage protection 5 V output: 5.7-6.7 VDC. Other outputs 10% to 20% above nominal output. Latching type, recycle AC to reset. Environmental Logic Control Operating temperature: 0° to 50°C ambient Power failure TTL logic signal goes high 50-150 msec derate each output at 2.5% per degree from after main output. It goes low at least 4 50° to 70°C msec before loss of regulation. Remote sense Compensates for 0.5 V lead drop min. Electromagnetic susceptibility: Designed to Will operate without remote sense meet IEC 801, -2, -3, -4, -5, -6, Level 3 connected. Reverse connection Humidity: Operating; non-condensing protected. 5% to 95% Vibration: Three orthogonal axes, sweep at Safety 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational VDE 0805/EN60950 (IEC950) 11774-3336-1245 (LC #84997) Storage temperature: -40° to 85°C UL UL1950 E132002 Temperature coefficient: ±.04% per °C CSA CSA 22.2-234 Level 3 LR53982C NEMKO EN 60950/EMKO-TUE P95100376 MTBF demonstrated: >550,000 hours at full load (74-sec) 203 and 25°C ambient conditions CB Certificate and report 1563, 1564, 1565, 1566, 1567 CE Mark (LVD) Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 100 rev 12.10.03 LPS110 Series VOLTAGE ADJ ASIA EUROPE AMERICAS Units 2111-2116, Level 21 Astec House, Waterfront Business Park 5810 Van Allen Way Tower1, Metroplaza Merry Hill, Dudley Carlsbad, CA 92008 223, Hing Fong Road West Midlands, DY5 1LX, UK Telephone: 760-930-4600 Fwai Fong, New Territories Telephone: 44 (1384) 842-211 Facsimile: 760-930-0698 Hong Kong Facsimile: 44 (1384) 843-355 Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Model Output Minimum Maximum Load with Maximum Load with Peak Regulation2 Ripple Number Voltage Load Convection Cooling 30 CFM Forced Air Load1 P/P (PARD)3 LPS113 12 V 0 A 6.7 A 9.2 A 10.4 A ±2% 120 mV LPS114 15 V 0 A 5.3 A 7.3 A 8.3 A ±2% 150 mV LPS115 24 V 0 A 3.3 A 4.6 A 5.2 A ±2% 240 mV LPS118 48 V 0 A 1.7 A 2.3 A 2.6 A ±2% 480 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load. Note: -B suffix added to model number indicates L bracket option. -B Bracket Pin Assignments #6-32 PEM 4.28" 6 places ConnectorLPS113 LPS114 LPS115 LPS118 (108.6) 2.5" SK1-1 GND GND GND GND (63.5) SK1-3 Neutral Neutral Neutral Neutral SK1-5 Line Line Line Line SK2-1 +12 V +15 V +24 V +48 V 6.4" SK2-2 +12 V +15 V +24 V +48 V (162.6) 7.3" SK2-3 +12 V +15 V +24 V +48 V (185.5) SK2-4 Common Common Common Common SK2-5 Common Common Common Common SK2-6 Common Common Common Common SK2-7 Common Common Common Common 2.2" (56) SK2-8 +12 V +15 V +24 V +48 V 0.86" SK2-9 +12 V +15 V +24 V +48 V (21.8) SK201-1 +sense +sense +sense +sense 5.9" (150.0) SK201-2 -sense -sense -sense -sense SK202-1 Pok Pok Pok Pok SK202-2 GND GND GND GND 0.25" Mating Connectors (6.35) SK 202 AC Input: Molex 09-50-8051 (USA) M2 (POK) 09-91-0500 (UK) 1 2 SK 201 1 (+S) 1 PINS: 08-58-0111 2 (-S) 2 3 DC Outputs: Molex 09-50-8091 (USA) 4 5 4.0" 09-91-0900 (UK) 6 (101.6) 7 PINS: 08-58-0111 8 9 3.5" Remote sense/power fail: (88.9) Molex 22-01-1022 (USA) 1 22-01-1023 (UK) GND 3 N PINS: 08-50-0114 L Astec Connector Kit #70-841-007, includes all of the above SK 1 M1 6.5" 0.25" 0.156" (4) Notes: (165.1) (6.35) 7.0" DIA (4 places) 1. Specifications subject to change without notice. (177.8) 2. All dimensions in inches (mm), tolerance is ±.02”. 3. Specifications are for convection rating at factory settings unless otherwise stated. 4. Mounting holes M1 and M2 should be grounded for EMI purposes. 1.80" 5. Mounting hole M1 is safety ground connection. (45.7) 6. L Bracket mounting (6-32) maximum insertion depth is .20” (5). 7. Warranty: 1 year 8. Weight: 1.25 lb / 0.57 kg 0.12" (3) www.astecpower.com 101 SK 2
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the LPS118-B?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Astec NLP40-7605J Open Frame Power Supply 40W ~ 50W, 5V @ 8A
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods