Industrial Trading

Description

Astec ALH60G48N Power Supply - ALH60 Series Open Frame Power Supply 200 Watts (3.3V @ 60A)

Part Number

ALH60G48N

Price

Request Quote

Manufacturer

ASTEC

Lead Time

Request Quote

Category

Power Supply Board

Specifications

Efficiency

91% @ 3.3V (Typical)

Enable

TTL compatible (positive & negative enable options)

Input range

36-75 VDC

Input Surge

100V / 100ms

Output Voltage Adjust Range

+/-10% of nominal output

Overvoltage Protection

130% nominal output

Remote sense

Up to 10%Vout

Ripple and Noise

2% typical (100mV p-p max)

Transient Response

4% max deviation with 50% to 75% full load 300 µS (max) recovery

Features

-40°C to 100°C baseplate operating temperature
Efficiency Full Load: 86% (Min) 85°C
Fixed frequency switching (400 kHz)
High capacitive load limit on start-up
High efficiency, 3.3V@91% (Typical)
Input Voltage: 48V
Low output ripple and noise
Open Frame version also available (ALH60)
Output Voltage: 2.5V @ 60A
Positive and Negative enable function
Regulation to zero load
Remote sense compensation

Datasheet

Astec-AEH60Y48N-L-datasheet1-2051174113.pdf

1450 KiB

Download

Extracted Text

Total Power: 200 Watts (3.3V @ 60A) Input Voltages: 48 V 60Amps No. of Outputs: Single AEH60 ALH60 (Open Frame) Electrical Specs Ultra High Efficiency Half Brick Input Input range 36-75 VDC Input Surge 100V / 100ms Efficiency 91% @ 3.3V (Typical) Control Enable TTL compatible (positive or negative enable logic control options) Output Regulation (Line, Load, Temp) <2% 1 Ripple and Noise 2% typical (100mVp-p max) Remote Sense Up to 10%Vout Special Features Output Voltage Adjust Range ±10% of nominal output • High efficiency, 3.3V@ 91% (Typical) Transient Response 60mV typical output deviation • Baseplate (AEH) or Open frame (ALH) design 25% step change • Low output ripple and noise 150 µS recovery time • High capacitive load limit on start-up Overv Voltage • Remote sense compensation Protection 135% nominal output (latching) • Regulation to zero load • Fixed frequency switching Over Current Protection 115% of full load (latching) • Industry Std features: Input UVLO, OCP, OVP, OTP; Short ckt protection; ±10% Output Adjust Over Temperature • Positive or Negative enable logic control option Protection Shutdown - autorecovery mode • Meets Basic Insulation Isolation Voltage 1500 Vdc Environmental Operating temperature -40°C to +100°C Baseplate (AEH60) -40°C to +85°C Ambient (ALH60) Storage temperature: -55°C to +125°C Overtemperature protection: 115°C PCB Temperature (Typical) MTBF: >1 million hours Safety UL, cUL 60950 Recognized TUV EN60950 Licensed 2 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 EUROPE ASIA AMERICAS Astec House, Waterfront Business Park Units 2111-2116, Level 21 5810 Van Allen Way Merry Hill, Dudley Tower1, Metroplaza Carlsbad, CA 92008 West Midlands, DY5 1LX, UK 223, Hing Fong Road Telephone: 760-930-4600 Telephone: 44 (1384) 842-211 Fwai Fong, New Territories Facsimile: 760-930-0698 Facsimile: 44 (1384) 843-355 Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Output Efficiency Model Number Voltage Voltage 48V 3.3V @ 60A 91% (Typ) AEH60F48(N) 48V 2.5V @ 60A 90% (Typ) AEH60G48(N) 48V 2.5V @ 60A 90% (Typ) AEH60G48N-6T (see note 3) 48V 1.8V @ 60A 89% (Typ) AEH60Y48(N) 48V 1.2V @ 60A 85% (Typ) AEH60K48(N) 48V 3.3V @ 60A 91% (Typ) ALH60F48(N) 48V 2.5V @ 60A 90% (Typ) ALH60G48(N) 48V 1.8V @ 60A 89% (Typ) ALH60Y48(N) 48V 1.2V @ 60A 85% (Typ) ALH60K48(N) OPTION: suffix “N” = Negative Enable (default is Positive Enable without suffix “N”) Standard pin length is 5mm nominal. Consult factory for other options. AEH - BASEPLATE 2.30 [58.4] 1.90 0.50 M3 X0.5 MOUNTING HOLE [48.3] [12.7] 0.20 4 PLACES Pin Assignments 0.20 [5.1] [5.2] 0.08Ø [2.0Ø] 2 PLACES 0.20 Single Output [5.1] + Output + Vin 0.04Ø [1.0Ø] 7 PLACES 2.00 2.40 1. +Vin [50.8] [61.0] 2. Enable (On/Off) 3. Case (AEH version) - Vin -Output 4. -Vin 0.46 5. - Output [11.8] PIN SIDE DOWN 6. - Sense 1.90 SIDE VIEW 0.50 0.50 [48.3] [12.7] [12.7] 7. Trim PIN ASSIGNMENT 8. + Sense 0.90 0.90 4 1.20 1 + Vin 9. + Output [22.8] [22.9] 1.20 5 1.50 [30.4] 2 Enable (On/Off) [30.5] 1.50 1.90 [38.1] 6 3 CASE 3 1.90 [38.2] [48.3] [48.3] 4 - Vin 7 Notes: 5 -Output 2 6 -Sense 7 Trim 1. 20 mHz bandwidth. External 10 uF tant. capacitor + 9 1 8 + Sense 0.1 uF cer. capacitor placed from +V out to -Vout. 9 + Output NOTES: 2. Requires a 2.2 mf, 100V film capacitor connected ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) PIN PLACEMENT TOLERANCE : ± 0.005(0.127) between +V in and -V in to meet FCC class A and PIN SIDE UP MECHANICAL TOLERANCE ± .002(0.5) ETS300-386-1 requirements for conducted noise. 2.30 [58.4] 0.20 Consult Factory for filtering information to meet FCC 1.90 [5.1] 0.40 [48.3] 0.21 [10.2] class B, VDE or EIC specifications. [5.4] 0.20 3. Suffix -”6” for 3.7mm nominal pin length, “T” for tuned [5.1] 1 + Vin version for specific transient response requirement. 9 + Output 0.04Ø [1.0Ø] 7 PLACES 2 8 Minimum output capacitance required. Refer to 2.40 2.00 [50.8] 7 [60.9] Technical refernce Notes for details. 3 6 0.08Ø [2.0Ø] 2 PLACES -Output 5 4. All specifications are typical at nominal line, full load, 4 - Vin and 25°C unless otherwise noted. 5. All specifications subject to change without notice. SIDE V IEW PIN SIDE DOWN Mechanical drawings are for reference only 1.90 PIN ASSIGNMENT [48.3] 6. Technical Reference Notes should be consulted for 1 + Vin 0.50 0.50 2 Enable (On/Off) [12.7] detailed information when available [12.7] 0.90 0.90 3 CASE 4 5 [22.9] 1.20 [22.9] 1.20 4 - Vin [30.5] 7. Warranty: 1yr 1.50 [30.5] 1.50 5 -Output 3 6 [38.1] 1.90 [38.1] 1.90 [48.2] 6 -Sense [48.3] 7 7 Trim 8 + Sense 2 8 9 + Output 1 9 * Astec reserves the right to make changes to the information NOTES: ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) contained herein without notice and assumes no liability as a PIN PLACEMENT TOLERANCE : ± 0.005(0.127) result of its use or application. (REV05: FEBRUARY 2, 2004) MECHANICAL TOLERANCE ± .002(0.5) PIN SIDE UP ALH - BASEPLATE www.astecpower.com 3

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products