Best dry-block on the market! NEW Triple-zone Patent pending! te m p e r at u r e Reference Temperature Calibrator RTC-700 » High accuracy Down to ±0.11°C using the external refer- ence sensor. 4-wire True-Ohm-Measurement technology is used. » Excellent stability to 0.008˚C » Wide temperature range RTC-700 from 33 to 700ºC (91 to 1292ºF) » Improved temperature homogeneity Unique active triple-zone block ensures good temperature homo- geneity in the calibration zone. » DLC Dynamic Load Compensation Perfect temperature uniformity in the insert, even when calibrating large sensors or many sensors at a time. B and C models only » Display indicator for temperature uniformity AMETEK continues to develop new techniques to improve performance, Shows the degree of temperature uniformity in accuracy, convenience and functionality of the well-known JOFRA cali- the insert when using the new DLC technology. bration products. By doing so, we maintain our position as the leading B and C models only worldwide manufacturer of temperature dry-block calibrators. We are proud to introduce our new high temperature model RTC (Reference » Intelligent reference sensors Temperature Calibrator), which is no exception to the above and even JOFRA reference sensors are supplied with more sophisticated than any existing calibrators. intelligent plugs, holding the calibration data (coefficients) of the reference sensor. This is The RTC offers many new fantastic features, such as: a truly plug’n’play calibration system. • Patent pending DLC, Dynamic Load Compensation system, for perfect temperature uniformity in the insert » USB communication • Unique intelligent sensors for plug’n’play connection All RTC calibrators communicate via an • USB connector for communication easy-to-use USB port. • Easy-to-read color VGA display with perfect overview of the actual status • Intuitive, fast and user-friendly navigation • Lightweight and easy to carry around » Time-saving • New functional carrying case design with integrated trolley Super high speed cooling. • New multi-hole insert kits covering all the most used sensor sizes • High profile design and the well-known long lasting JOFRA quality » EURAMET Best performing dry-block with regard to the The new RTC calibrator comes in three different models – A, B, and C. EURAMET/cg-13/v.01 guideline for testing of • RTC-A reference temperature calibrator dry blocks. • RTC-B reference temperature calibrator with input for reference sensor, DLC sensor and sensors-under-test • RTC-C reference temperature calibrator with input for reference sensor and DLC sensor ISO 9001 Manufacturer Specification Sheet, SS-RTC-700 Patent pending! NEW Triple-zone NEW! Based on the new DLC functionality, the RTC is the best Unique temperature performance performing dry-block calibrator on the market, when being The RTC series of calibrators provides precision tempera- calibrated and tested according to the globally accepted ture calibration of sensors, whatever the type or format. EURAMET/cg-13/v.01 guideline for calibration and testing This is accomplished through an innovative active triple- of dry-blocks. zone heating technology. The DLC system comprises a special differential temperature The RTC-700 features our new active triple-zone heating sensor designed especially for the RTC. The sensor is placed technology. Each heating zone is independently controlled in the insert and connected to the calibrator. When the DLC for precision temperature calibration. The homogeneity in function is enabled, the calibrator will automatically equalize the lower part is close to that of a laboratory liquid bath. the temperature homogeneity inside the insert on top of the The two lower zones ensures optimum heat dissipation normal temperature control and stabilization. throughout the entire calibration zone. The upper zone compensates for heat loss from the sensor-under-test and DLC - User advantages from the open top. This design also eliminates the need for Calibrating with DLC sensor gives the following advantages: extra insulation of sensors-under-test and makes it possible 1. Calibration of several sensors simultaneously to calibrate liquid-filled and other mechanical sensors. 2. Calibration of thick sensors 3. Gives TSL (Thermo Sensitive Length) independency. It is no longer necessary to know the TLS of the sensor 4. Compensates for sensor production tolerances like the PT100 element being mounted in various positions in the sensor 5. Trouble free and full acuracy calibration of sensors with PT100 elements up to 60 mm length 6. The DLC indicator proves that the dual-zone is active an functioning well 7. Proves that the calibrator is working perfect. The DLC value will be very close to 0.00 when the calibrator only is loaded with DLC sensor and an external reference DLC - Dynamic Load Compensation sensor 8. Together with the stability indication, the DLC indicates To bring our well documented active dual-zone when the calibration values can be read technology to an even higher level, we have developed the patent pending new DLC system. This newly developed unique feature makes it possible to perform top calibration specifications without being affect- ed by the actual load e.g. many sensors or very big sensors. A new DLC sensor, Dynamic Load Compensation sensor, has been specially developed for this purpose. The RTC-700 features the active triple-zone temperature control which improves the homogeneity in the well by adjusting the temperature in the top of the well to the same temperature as in the bottom. The triple-zone keeps this dif- ference at a minimum. DLC Sensor The new DLC sensor improves the homogene- ity even more by controlling Axial temperature curves for a RTC calibrator with and with- the homogeneity not only in out the DLC functionality activated the well, but also inside the insert, where the sensors- under-test are placed during USB connector for communication calibration. The DLC sensor Another new RTC feature is the USB connection that facili- measures the temperature tates easy communication with JOFRACAL. The USB con- homogeneity in the insert nection also supports easy download of future firmware and provides feedback to the upgrades. active triple-zone system, which now compensates the The new USB connection provides fast and easy access to temperature difference to a all laptops without the need of RS-232 to USB converters. minimum inside the insert. In this way, the DLC func- Future-proof through e.g. a flash capability for easy firm- tion makes the homogeneity ware upgrades as well as already integrated LAN commu- independent of the different nication, SD-card slot and USB host connectors for future loads of the insert. use. 2 www.jofra.com Reference Temperature Calibrator • RTC-700 Patent pending! NEW! plug’n’play New multi-hole insert kits Two special multi-hole insert kits have been developed to comply with calibration of almost any sensor diameter with- out having to buy numerous inserts. The first kit is a metric insert kit consisting of only four inserts covering all diameters from 3 to 13mm. The other is Intelligent reference sensors an imperial insert kit consisting of only three inserts cover- The JOFRA STS-200 intelligent reference sensors as well ing six different sizes from ⅛” to ½”. as the new DLC sensor are all containing all individual cali- bration data regarding the sensor. All inserts have holes for both metric and imperial STS refer- Firstly, this means that the time-consuming coefficient down- ence sensors and DLC sensor. loading sequence with risk of errors is no longer necessary. Secondly, the user can change the reference sensor and be With this new insert kit in the up and running immediately. Time saving and convenient. carrying case, the user is now able to calibrate all commonly With the intelligent sensors, AMETEK has eliminated a known sensor sizes. source of error and the system is now giving a fail-safe plug’n’play calibration system. These new insert kits are part of the JOFRA lightweight Unique strategy. reference sensors Wide temperature range The new STS-200 refer- The RTC-700 can perform calibration over a very wide tem- ence sensors and the DLC perature range starting from 33°C and up to 700°C (91 to sensors have been spe- 1292°F). This makes it possible to perform calibration jobs cially designed. They are over a range of 667°C (1232°F) with only one calibrator. both angled 90˚ and have been customized to fit the calibrator so they are only Easy-to-read slightly higher than the top color display and user-friendly navigation of the RTC calibrator. The new 5.7” full color VGA display is very easy to read. The main temperatures, like SET, READ, TRUE and SUT The unique design makes (Sensor under test), are always displayed at all stages of the it possible to calibrate programming or calibration procedure. threaded sensors and sen- sors with connection heads without any problems. Easy to carry A calibrator is carried from one job to another. Therefore, it is essential that it is easy to carry. We have thoroughly included the weight issue in our design and have developed new design techniques that have made the RTC calibrator easy to carry around without com- promising its quality, durability and functionality. The navigation is menu-driven and very logical and intui- Long inserts for accurate calibration tive to use. The display shows any important information The new extended insert length increases the maximum needed for the current function in use. The communication possible diameter of the sensor under test to 16 mm. windows pop up and are followed by discrete sound mes- sages. Switch test of long bulb sensor can be carried out with very high accuracy. The display is very bright and the main information can easily be read from a distance. Fast temperature calibration Based upon our new developed heating block The large display contains many detailed information at a the RTC-700 is able to perform a unique com- glance, such as: bination of high speed and high accuracy. • Up to five temperature readings simultaneously Time is money! This is why all the new RTC calibrators • Stability status have an increased calibration speed compared to all other • Load compensation status calibrators. The implication is savings in both production • Real time clock downtime and general calibration costs. • Serial number of reference sensor • Sensor-under-test status RTC-700 • Reference Temperature Calibrator www.jofra.com 3 NEW! 700˚C NEW! Patent pending! NEW! Special designed carrying case SET-Follows-TRUE (B & C model only) AMETEK has designed an all-in-one-handle carrying case. Available on B and C models only, the “SET-Follows-TRUE” makes the instrument tune in until the temperature reading We have now made it possible to store both the STS refer- of the external reference “TRUE” meets the desired “SET” ence sensors and DLC sensors in the carrying case with an temperature. This feature is important when it is critical that optimum physical protection. There are compartments for the temperature of the calibration zone matches the desired inserts to cover all sensor under test dimensions and com- temperature when measured with accurate external refer- partments for the new integrated support rod set, wires, ence sensors. manuals, certificates, plugs, insert tools etc. Reading of sensor-under-test (B model only) All compartments are specially designed to hold one of the Model B of the RTC is equipped with a built-in accu- above mentioned items. This makes it very easy to keep rate measuring circuit for sensor-under-test (input), which track of any accessories. enables measurement of virtually any type of temperature sensors including: Resistance thermometers (RTD), ther- For optimum protection of the calibrator and the accesso- mocouples (TC), transmitters, milliamps (mA), voltage (V) ries, the compartments are designed to hold the accessories and thermostats fixed during transportation. The RTC calibrators can be user-programmed from the Integrated support rod keyboard for fully automatic sensor calibrations. Once the The new integrated support rod is part unit is programmed, the instrument is self-operating and of the reduced weight philosophy. It is performs the configured calibration routine. All calibration lightweight and very easy to mount on data are stored and can be read in the display. the RTC. Two fixing holes are integrated in the calibrator where the support rods can be mounted. Even though weight has been reduced with 50% the support rod is very firmly positioned. MVI - Secure temperature stability MVI stands for ’’Mains power Variance Immunity’’. Unstable mains power is a major contributor to on-site calibration inaccuracies. Traditional temperature calibrators often become unstable in production environments where large electrical motors, heating elements, and other devices are periodically cycled on or off. The cycling of supply power Switch test (B model only) can cause the temperature regulator to perform inconsis- tently, leading to both inaccurate readings and unstable Users may perform a thermoswitch test and find “Open”, temperatures. “Closed” and the hysteresis (deadband) automatically. The instrument retains the last twenty test results. The RTC calibrators all employ the MVI functionality, thus avoiding such stability problems. Auto-stepping Up to 20 different temperature steps may be programmed including the hold time for each step. Upon completion of an auto step routine, the user can easily read the results for the sensor-under-test on the RTC display. Results from twenty auto-step calibrations are stored. The “Set temperature” feature allows the user to set the exact desired temperature with a resolution of 0.001°. Highest accuracy (B & C model only) The RTC series calibrators may be supplied with a built-in reference thermometer to be used with an external refer- ence sensor only B & C models. This feature allows the instrument to perform calibrations on-site, while maintaining a high accuracy. A special 90° angled external reference sensor has been designed to accommodate calibration of sensors with a transmitter head, top connector or similar arrangement. The user can decide whether to read the built-in reference sen- sor or the more accurate angled reference sensor from the large, easy-to-read LCD display of the calibrator. The exter- nal sensor and the internal sensor readings are independent of one another. 4 www.jofra.com Reference Temperature Calibrator • RTC-700 NEW! Enhanced stability JOFRACAL calibration software A stability indicator shows when the RTC calibrator has JOFRACAL is a highly versatile calibration software that reached the desired temperature and is stable. The user is supplied together with the RTC calibrators. The soft- may change the stability criteria for the external reference ware ensures easy calibration of all kind of temperature and the sensor-under-test quickly and simply. The stabil- sensors, such as RTD´s, thermocouples, transmitters and ity criterion is the user’s security of a correct calibration. thermoswithes. Furthermore, it can be used for pressure A count-down timer is displayed next to the temperature calibration i.e. pressure gauges and pressure switches. read-out. JOFRACAL integrates with all JOFRA calibration instru- ments. As for temperature calibrators, it is the whole range of temperature calibrators. Regarding pressure calibrators, Instrument setups it integrates with DPC-500, HPC and IPI pressure calibra- The RTC series allows the user to store up to ten (10) com- tors. JOFRACAL also has full integration with the series of plete instrument setups. You may store all sorts of informa- signal calibrators. tion including temperature units, stability criteria, use of external reference sensors, resolutions, sensors-under-test (SUT), conversions to temperature, display contrasts, etc. The setup may be recalled at any time. Maximum and minimum temperature From the setup menu, the user can select the maximum and minimum temperature limit for the calibrator. This func- tion prevents damage to the sensor-under-test caused by excessive temperatures and it helps reducing sensor drift from exposures of too high temperatures. This feature can be locked with an access code. JOFRACAL can also be used for manual calibrations, as it can Silent Operation be set up to accept manual entry of calibration data together The RTC calibrator can be programmed to run in silent with other liquid baths, ice points or dry-block heat sources. operation. This function is an advantage if calibrating in The calibration data collected can be stored on a PC for a laboratory or in an office. If used in silent operation the later recall or analysis. The RTC calibrator stores the cali- calibrator is not using its full speed potential. bration procedure and can be taken out to the process site without bringing a personal computer. As found/As left (B model only) When running a calibration initiated from a work order, the This allows the RTC calibrator to: user can select the calibration as an As Found or an As Left • Operate as a stand-alone instrument, using advanced calibration. calibration routines without the assistance of a personal computer on site. The work order functionality SYNC output • Prevent unauthorized changes to a calibration routine. A synchronization output signals when the instrument is Personnel who are not authorized to alter a calibration stable and may be used with ancillary devices such as routine cannot do so video recorders, digital cameras or as an input to a data logging device. The SYNC output may be useful for auto- Once all calibrations are completed, the data may be up- loaded to the JOFRACAL for printing of certificates. The mating and documenting your calibrations when calibrating external reading devices. data collected may be stored on the personal computer for later recall or analysis. Calibration of indication devices JOFRACAL offers extended output formats of the cap- When calibrating an indicating device in the work order tured calibration data such as PDF file format and ASCII/ mode, users may key in the results during or after the test. semicolon separated text format for further processing and Using the “Calibration info” function, the user may view the calculation of data in spreadsheets and word processors. complete calibration task, including the “Scenario” before the calibration takes place. Hardware requirements ® • INTEL PENTIUM® II 1.4 GHz processor Calibration of up to 24 sensors • 128MB RAM (256MB recommended) with JOFRA ASM • 80MB free disk space on hard disk Using the RTC series together with the ASM, Advanced (120MB recommended) prior to installation Signal Multi-scanner, offers a great time-saving automatic • Standard VGA (800x600, 256 colors). solution to calibrate multiple temperature sensors at the 1024x768 recommended same time. The ASM series is an eight channel scanner • USB input device for installation of program controlled by the JOFRACAL software on a PC. Up to 3 • 1 free USB and 1 free RS-232 serial port ® ® ASM units can be stacked to calibrate up to 24 sensors at • Microsoft Windows XP, Microsoft Windows Vista a time. It can handle signals from 2-, 3- and 4 wire RTD’s, • System fonts; MS San Serif and Arial thermocouples, transmitters, temperature switches and voltage. RTC-700 • Reference Temperature Calibrator www.jofra.com 5 FUNCTIONAL SPECIFICATIONS INPUT SPECIFICATIONS All input specifications apply to the dry-block of the calibrator Temperature range running at the respective temperature (stable plus an additional @ ambient temp. 0°C/32°F: ........10 to 700°C/32 to 1292°F 20 minute period). @ ambient temp. 23°C/73°F: ......33 to 700°C/91 to 1292°F All input specifications are valid for RTC-700. @ ambient temp. 40°C/104°F: ..50 to 700°C/122 to 1292°F RTD reference input (B & C models only) Accuracy (model B & C) with external STS ref. sensor 1) Type .................. 4-wire RTD with true ohm measurements RTC-700 B & C (33 to 660°C) ..................... ±0.11°C/±0.2°F F.S. (Full Scale) ......................................................400 ohm Relative to reference standard. Specifications by use of the Accuracy (12 months) ...... ±(0.0012% rdg. + 0.0005% F.S.) external JOFRA STS-200 reference sensor RTD Type Temperature 12 months °C °F °C °F Accuracy with internal reference sensor -50 -58 ±0.008 ±0.015 Pt100 RTC-700 A, B & C ....................................*±0.29°C/±0.52°F 0 32 ±0.008 ±0.015 * Accuracy 33 to 660ºC is including calibration uncertainty. reference 155 311 ±0.011 ±0.019 Accuracy 660 to 700ºC ± 0.29ºC exclusive calibration uncertainty. 320 608 ±0.014 ±0.024 RTC-700 is delivered calibrated in 660 to 700ºC with calibration uncertainty ±1.4ºC 420 788 ±0.015 ±0.027 700 1292 ±0.020 ±0.036 Stability Note 1: True ohm measurement is an effective method to eliminate errors from induced thermoelectrical voltage @ 33 to 125ºC/91 to 257ºF ................... ±0.008°C/±0.015°F @ 125 to 425ºC/257 to 797ºF ...............±0.015ºC/±0.027ºF @ 425 to 700ºC/797 to 1292ºF ...............±0.02ºC/±0.036ºF DLC sensor input (B & C models only) Measured after the stability indicator has been on for 15 minutes. Measuring time is 30 minutes. Type Temperature 12 months °C °F °C °F 33 91 ±0.015 ±0.027 Axial homogeneity @ 60 mm DLC 700 155 311 ±0.013 ±0.024 input @ temp. range 33 to 100°C..................................... ±0.10°C 420 700 ±0.011 ±0.020 @ temp. range 100 to 420°C................................... ±0.25°C 700 1292 ±0.010 ±0.018 @ temp. range 420 to 700°C................................... ±0.40°C @ temp. range 91 to 212°F ......................................±0.18°F @ temp. range 212 to 788°F ....................................±0.45°F RTD sensor under test input (B model only) @ temp. range 788 to 1292°F ..................................±0.72°F F.S. (range) .............................................................400 ohm Accuracy (12 months).................. ±(0.002% Rdg.+0.002% F.S.) Resolution (user-selectable) F.S. (range) ...........................................................4000 ohm All temperatures ........................... 1°, 0.1°, 0.01° or 0.001˚ Accuracy (12 months) ...........±(0.005% Rdg.+0.005% F.S.) 2-wire ............................................................add 50 mOhm Heating time RTD Type Temperature 12 months 33 to 700°C/91 to 1292°F .................................. 45 minutes °C °F °C °F -50 -58 ±0.064 ±0.115 Pt1000 Cooling time 0 32 ±0.073 ±0.131 α = 385 155 311 ±0.076 ±0.136 700 to 100°C/1292 to 212°F .............................. 43 minutes 320 608 ±0.088 ±0.158 100 to 50°C/212 to 122°F .................................. 17 minutes 700 1292 ±0.121 ±0.217 50 to 33°C/122 to 91°F ...................................... 20 minutes -50 -58 ±0.115 ±0.191 Pt500 0 32 ±0.127 ±0.228 α = 385 Time to stability (approx.) 155 311 ±0.142 ±0.255 RTC-700 ............................................................. 10 minutes 320 608 ±0.145 ±0.260 700 1292 ±0.185 ±0.333 Immersion depth -50 -58 ±0.025 ±0.045 Pt100 0 32 ±0.026 ±0.046 RTC-700 ....................................................... 200 mm/7.9 in α = 385 155 311 ±0.030 ±0.054 320 608 ±0.035 ±0.063 420 420 ±0.039 ±0.070 700 1292 ±0.049 ±0.088 Above mentioned input accuracies are for the most common used sensor types. The reference manual holds information for 17 extra RTD types. 6 www.jofra.com Reference Temperature Calibrator • RTC-700 Thermocouple input Switch input (B model only) Range ..................................................................... ±78 mV Switch dry contacts F.S. (Full Scale) ......................................................... 78 mV Test voltage ...............................................Maximum 5 VDC Accuracy (12 months) ........ ±(0.005% Rdg. + 0.005% F.S.) Test current ..............................................Maximum 2.5 mA TC Type Temperature 12 months* Mains specifications °C °F °C °F -50 -58 ±0.09 ±0.17 Voltage ...............................115V (90-127) / 230V (180-254) E 0 32 ±0.06 ±0.11 Frequency, non North American ...........50 Hz ±5, 60 Hz ±5 155 311 ±0.06 ±0.11 Frequency, North American deliveries ...................60 Hz ±5 320 608 ±0.07 ±0.12 Power consumption (max.) ......................................1150 W 650 1202 ±0.08 ±0.14 . -50 -58 ±0.10 ±0.18 J Communication interface 0 32 ±0.08 ±0.14 155 311 ±0.09 ±0.16 Serial data interface .............................USB 2.0 device port 320 608 ±0.09 ±0.16 Serial data interface ...................USB 2.0 host double port* 650 1202 ±0.09 ±0.17 LAN ...................................... Ethernet MAC 10/100 Base-T* -50 -58 ±0.14 ±0.24 K SD ............................................................................ SD slot* 0 32 ±0.10 ±0.19 * for future expansion 155 311 ±0.11 ±0.20 320 608 ±0.11 ±0.20 650 1202 ±0.13 ±0.23 Miscellaneous -50 -58 ±0.15 ±0.26 T Operating temperature ......................0 to 40°C/32 to 104°F 0 32 ±0.10 ±0.18 Storage temperature ....................... -20 to 50˚C/-4 to 122˚F 155 311 ±0.08 ±0.15 Humidity ......................................................... 0 to 90% RH 320 608 ±0.08 ±0.15 Protection class ..........................................................IP-10 400 752 ±0.08 ±0.14 -50 -58 ±1.30 ±2.35 R PHYSICAL SPECIFICATIONS 0 32 ±0.78 ±1.40 155 311 ±0.47 ±0.84 320 608 ±0.40 ±0.73 Weight 650 1202 ±0.39 ±0.70 Instrument ....................................................11.3 kg/24.9 lb -50 -58 ±0.98 ±1.76 S Carrying case ...............................................11.0 kg/24.3 lb 0 32 ±0.78 ±1.40 Instrument in Carrying case .........................24.3 kg/53.6 lb 155 311 ±0.49 ±0.89 Instrument in packaging ...............................16.3 kg/36.0 lb 320 608 ±0.45 ±0.81 Instrument in Carrying case & packaging ....27.3 kg/60.2 lb 650 1202 ±0.41 ±0.73 250 482 ±1.57 ±2.83 B 320 608 ±1.19 ±2.14 Dimensions (LxWxH) 650 1202 ±0.67 ±1.21 Instrument ............................................... 362x171x421 mm -50 -58 ±0.20 ±0.35 N Carrying case .......................................... 470x350x600 mm 0 32 ±0.15 ±0.27 Instr. & Carrying case .............................. 470x350x600 mm 155 311 ±0.13 ±0.23 Instr. & packaging ................................... 442x251x481 mm 320 608 ±0.13 ±0.23 Instr., Carrying case & packaging ........... 550x430x660 mm 650 1202 ±0.13 ±0.23 -50 -58 ±0.13 ±0.24 U 0 32 ±0.10 ±0.18 INSERTS 155 311 ±0.08 ±0.14 320 608 ±0.08 ±0.14 * Excl. CJC accuracy ±0.3˚C / ±0.54˚F Insert dimensions RTC-700 outer diameter ............................29.8 mm/1.17 in Transmitter supply RTC-700 inner diameter .............................25.6 mm/1.01 in RTC-700 length ...........................................210 mm/8.27 in Output voltage ................................................24VDC ±10% Output current .......................................... Maximum 28 mA Weight of non-drilled insert (approx.) RTC-700 .......................................................1060 g/37.3 oz Transmitter input mA (B model only) Range ................................................................. 0 to 24 mA Accuracy (12 months) ..........±(0.005% Rdg. +0.010% F.S.) Voltage input VDC (B model only) Range ............................................................... 0 to 12 VDC Accuracy (12 months) ..........±(0.005% Rdg. +0.010% F.S.) RTC-700 • Reference Temperature Calibrator www.jofra.com 7 PREDRILLED INSERTS FOR RTC-700 All predrilled inserts have holes for: 4 mm reference sensor • ¼” reference sensor • 4 mm hole for DLC sensor Spare part no. for predrilled inserts with reference holes Instrument 1 Sensor diameter Insert code RTC-700 A/B/C 3 mm 003 127148 4 mm 004 127149 5 mm 005 127150 6 mm 006 127151 7 mm 007 127152 Single Hole Insert 8 mm 008 127153 9 mm 009 127154 10 mm 010 127155 11 mm 011 127156 12 mm 012 127157 13 mm 013 127158 14 mm 127159 014 15 mm 015 127160 16 mm 016 127161 Package of the above inserts SMM 127162 Spare part no. for predrilled inserts with reference holes Instrument 1 Sensor diameter Insert code RTC-700 A/B/C 1/8 in 125 127164 3/16 in 187 127165 1/4 in 250 127166 5/16 in 312 127167 3/8 in 375 127168 7/16 in 437 127169 1/2 in 500 127170 9/16 in 562 127171 5/8 in 625 127172 Package of the above inserts SIM 127173 Note 1: Use the insert code, when ordering a JOFRA standard insert together with the RTC calibrator UNDRILLED INSERTS FOR RTC SERIES Inserts, undrilled incl. insulation plugs Instrument 1 Inserts Insert code RTC-700 A/B/C UN1 5-pack, undrilled inserts with no holes UN1 127197 5-pack, undrilled inserts with hole for DLC sensor UN2 127198 5-pack, undrilled inserts with 2 holes for STS reference sensors 127199 UN3 (4mm & ¼”) and 1 hole for DLC sensor Note 1: Use the insert code, when ordering a JOFRA standard undrilled insert together with the RTC calibrator UN2 UN3 8 www.jofra.com Reference Temperature Calibrator • RTC-700 MULTI-HOLE INSERTS FOR RTC-700 - METRIC (mm) Spare part no. for multi-hole inserts - metric (mm) Instrument 1/4” 1 Insert type Insert code RTC-700 A/B/C 4 mm Multi-hole type 1 M01 127200 4 mm Multi-hole type 2 M02 127201 Multi-hole type 3 M03 127202 4 mm 4 mm Multi-hole type 4 M04 127203 4 mm Multi-hole type 7 M07 127244 Multi-hole type 8 M08 127245 6 mm 4 mm Multi-hole type 9 M09 127246 Set of 4 Metric Multi Inserts, 3mm to 13mm SM 127252 Multi-hole M01 (Incl. 127203, 127244, 127245, 127246) Note 1: Use the insert code, when ordering a JOFRA standard multi-hole insert together with the RTC calibrator 1/4” 1/4” 4 mm 3 mm 9 mm 12 mm 6 mm 8 mm 6 mm 4 mm 4 mm 4 mm 6 mm 4 mm 4 mm 1/4” 5 mm 4 mm 6 mm 6 mm 6 mm Multi-hole M04 Multi-hole M08 Multi-hole M02 1/4” 3 mm 3 mm 4 mm 11 mm 13 mm 10 mm 7 mm 3 mm 4 mm 4 mm 6 mm 4 mm 4 mm 4 mm 1/4” 3 mm 1/4” 3 mm 3 mm 3 mm Multi-hole M07 Multi-hole M09 Multi-hole M03 Set of Metric multi-hole inserts. MULTI-HOLE INSERTS FOR RTC-700 - IMPERIAL (INCH) Spare part no. for multi-hole inserts - imperial (inch) Instrument 1 Insert code Insert code RTC-700 A/B/C Multi-hole type 5 M05 127204 Multi-hole type 6 M06 127205 Multi-hole type 10 127249 M10 Set of 3 Imperial Multi Inserts, 1/8 to 1/2 inch SI 127254 (Incl. 127170, 127205, 127249) Note 1: Use the insert code, when ordering a JOFRA standard multi-hole insert together with the RTC calibrator 1/4” 3/8” 4 mm 7/16” 5/16” 1/4” 1/4” 1/8” 3/16” 1/4” 4 mm 4 mm 4 mm 4 mm 1/4” 1/4” 1/4” 4 mm 1/4” Multi-hole M05 Multi-hole M06 Multi-hole M10 Set of Imperial multi-hole inserts. RTC-700 • Reference Temperature Calibrator www.jofra.com 9 STANDARD DELIVERY ACCESSORIES 125066 Extra fixture for sensor grip Model A, B and C: 125067 Extra sensor grip • RTC dry-block calibrator (user specified) 122771 Mini-Jack connector for stable relay output • Mains power cable (user specified) 120516 Thermocouple Male Plug - Type J - Black • Traceable certificate - temperature performance 120517 Thermocouple Male Plug - Type K - Yellow • Tool for insertion tubes 120514 Thermocouple Male Plug - Type N - Orange • Heat shield 120515 Thermocouple Male Plug - Type T - Blue • JOFRACAL 120518 Thermocouple Male Plug - Type R / S - Green • USB cable 120519 Thermocouple Male Plug - Type Cu-Cu - White • Manual Model B instruments contain the following extra items: • Test cables (2 x red, 2 x black) • Traceable certificate - input performance for reference sensor and DLC sensor • Traceable certificate - input performance for sensor- under-test inputs (RTD, mA, mV, TC) Model C instruments contain the following extra items: • Traceable certificate - input performance for reference sensor and DLC sensor FUNCTIONAL COMPARISON Model A Model B Model C Triple-zone heating block • • • MVI - Mains Variance Immunity (or similar) • • • Stability indicator • • • Automatic step function • • • USB communication • • • Display resolution 0.001˚ • • • Programmable max. temperature • • • SYNC output (for external recording device) • • • Calibration of short sensors in special insert • • External precision reference sensor input • • External precision DLC reference sensor input • • “SET” follows “TRUE” • • Load compensation functionality • • Input for RTD, TC, V, mA • 4-20 mA transmitter input incl. 24 VDC supply • All inputs scalable to temperature • Automatic switch test (open, close and hysteresis) • Download of calibration work orders from PC • Upload of calibration results (as found & as left) • Model A Model B Model C 10 www.jofra.com Reference Temperature Calibrator • RTC-700 ORDERING INFORMATION Order number Description Base model number RTC700 RTC-700 Series, 33˚C to 700˚C (91˚F to 1292˚F) Model version A Basic model, without input B Full model, incl. DLC sensor input, Reference sensor input, Sensor-under-test input C Middle model, incl. DLC sensor input, Reference sensor input Power supply (US deliveries 60 Hz only) 115 115VAC 230 230VAC Mains power cable A European, 230V B USA/Canada, 115V C UK, 240V D South Africa, 220V E Italy, 220V F Australia, 240V G Denmark, 230V H Switzerland, 220V I Israel, 230V Insert type and size NON No insert selected (standard) UNX 1 x Undrilled Insert (Please see Insert selection for code) XXX 1 x Single hole insert (Please see Insert selection for code) MXX 1 x Multi hole insert (Please see Insert selection for code) SIX Set of 3 Imperial multi hole inserts. Covering holes from 1/8” to 1/2” SMX Set of 4 Metric multi hole inserts. Covering holes from 3mm to 13mm SIM Set of 9 Imperial inserts. Covering holes from 1/8” to 5/8” SMM Set of 14 Metric inserts. Covering holes from 3mm to 16mm Dynamic Load Compensation (B & C models only, optional) DLC DLC sensor STS Reference sensor (B & C models only, optional) R4 STS-200 Ref. sensor. Dia. 4mm. Length 227mm (STS200A970EH) R5 STS-200 Ref. sensor. Dia. 1/4”. Length 227mm (STS200B970EH) Calibration Certificate F Traceable Callibration Certificate (standard) H Accredited Calibration Certificate EA Full EURAMET Calibration Certificate FS Traceable System Calibration Certificate (B & C model only) HS Accredited System Calibration Certificate (B & C model only) EAS Full EURAMET System Calibration Certificate (B & C model only) EASD Full EURAMET System Calibration Certificate with DLC (B & C model only) Accessories CT Solid Protective Carrying case with trolley SR Support rod set TR Solid Protective Carrying case with trolley & Support rod set Sample order number JOFRA RTC-700 B with 230VAC, EU power cord, set of metric inserts, DLC, STS-200 ref. sensor, RTC700 B 230 A SM DLC R4 EA CT full EA temp. calibration certificate, and carrying case with trolley. RTC-700 • Reference Temperature Calibrator www.jofra.com 11 NEW! OPTIONS Carrying Case - Option CT With our new special designed carrying case it is now possible to store both reference and DLC sensor and 5 inserts in the case with an opti- mum physical protection. With improved integrated trolley system for easy and safe transportation. AMETEK Test & Calibration Instruments A business unit of AMETEK Measurement & Calibration Technologies Division offering the following industry leading brands for test and calibration instrumentation. JOFRA Calibration Instruments Temperature Calibrators Portable dry-block calibrators, precision thermometers and liquid baths. Temperature ranges from -90°C(-130°F) to 1205°C(2200°F). Temperature sensors for industrial and marine use. Pressure Calibrators Convenient electronic systems ranging from -25 mbar to 1000 bar - fully temperature-compensated for problem- free and accurate field use. Signal Instruments Process signal measurement and simulation for easy control loop calibration and measurement tasks. M&G Pressure Testers & Pumps Pneumatic floating-ball or hydraulic piston dead weight testers with accuracies to 0.015% of reading. Pressure generators delivering up to 1,000 bar. Support rod set - Option SR Support rod for sensors to be mounted on Lloyd Instruments Materials testing machines and software from Lloyd all JOFRA RTC dry-block calibrators. Holds Instruments guarantees expert materials testing the sensor under test in its position, while solutions. The comprehensive program also covers calibrating. Includes 2 sensor grips and 2 Texture Analysers to perform rapid, general food testing fixtures for sensor grips. and detailed texture analysis on a diverse range of foods and cosmetics. Davenport Polymer Test Equipment Allows measurement and characterization of moisture- sensitive PET polymers and polymer density. Chatillon Force Measurement The hand held force gauges and motorized testers have earned their reputation for quality, reliability and accuracy and they represent the de facto standard for force measurement. Newage Testing Instruments Hardness testers, durometers, optical systems and software for data acquisition and analysis. www.jofra.com AMETEK Mansfield & Green (North America) T: +1 800 527 9999 | cal.info@ametek.com AMETEK Singapore Pte. Ltd. (Singapore) T: +65 6 484 2388 | aspl@ametek.com.sg AMETEK Inc. Beijing Rep. Office (China) AMETEK Denmark A/S T: +86 10 8526 2111 | jofra@ametek.com.cn Gydevang 32-34 | 3450 Allerød | Denmark AMETEK Instruments India Pvt Ltd. (India) T: +45 4816 8000 | ametek@ametek.dk T: +91 22 2836 4750 | ametek@ametek.dk AMETEK GmbH (Germany) T: +49 2159 9136 510 | info.mct-de@ametek.de AMETEK Calibration Instruments (UK) Information in this document is subject to change without notice. ©2011, by AMETEK, Inc., www.ametek.com. All rights reserved. T: +44 (0) 1243 833 302 | jofra@ametek.co.uk 12 www.jofra.com Pub code SS-RTC-700 Issue 1111