TDK-LAMBDA LZSA1000-3

LZSA Series Single Output Industrial Power Supplies Features u 5 Year Warranty u -40ºC to +71ºC Operation u MIL-STD-810E Vibration / Shock u Input transient protected u UL508, SEMIF47, Factory Mutual (Class 1, Division 2) u Rugged mechanical design with coating on pcbs u Superior thermal design u Wide range adjustment of output Key Market Segments & Applications Specifi cations Model LZSA500 LZSA1000 LZSA1500 Input Voltage (47-440Hz) (*) - 85 - 265VAC (LZSA1500 - see output derating graphs on page 2), 100-380VDC (1) Inrush Current (110 / 220VAC) A 25 / 45A 30 / 40A Power Factor - EN61000-3-2 Class A Effi ciency (typical) % 84% Ripple & Noise (Pk-Pk)(max) - 75mV 75mV 24V: 75mV; 48V: 150mV Line Regulation % 0.1% Load Regulation % 0.1% Transient Response - ±1% deviation, recovering to ±0.2% in <1.25ms (25% load change) Overcurrent Protection - 110 - 130% Overvoltage Protection V User adjustable from front panel Thermal Protection - Internal thermostat. Recycle AC to reset Hold Up Time at 110VAC ms 20ms Hold Up, 20ms Ride Through Remote Sense - Compensates for a total of 1V cable drop Remote Adjust - Using front panel potentiometer, Resistance (1k/V), or Voltage (1V/V) Remote On / Off - TTL compatible, active high Signals - Optocoupled transistor for AC Fail, DC Good, Inverter OK. 200kHz sync signal (Ref-sense) Indicators - Green LED indicates output good, red LED indicates overvoltage or over temperature Parallel Connection - Single wire current share Operating Temperature ºC -40º to +71ºC, derate linearly to 60% load from 60ºC~71ºC (20 min warm up period needed for <-30ºC) Storage Temperature ºC -40º to +85ºC Temperature Coeffi cient - 0.01%/ºC Humidity (non condensing) %RH 10 - 90%RH Cooling - Internal fan Withstand Voltage - Input - Ground 2,121VDC, Input - Output 4,242VDC, Output - Ground 500VDC Vibration - MIL-STD-810E, Method 514.4, Category 1, 9 Shock - MIL-STD-810E, Method 516.4 Proc. I, II, IV, VI Safety Agency Certifi cations - UL60950-1, UL508, EN60950-1, FM 3600, 3611, 3810, & CE Mark. SEMIF47(>100VAC) Leakage current uA <500uA at 265VAC, 60Hz Emissions - EN55022/EN55011 Class B, EN61000-3-3, MIL STD 461/462D CE102 Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11. IEEE C62.41 (6kV/30 Ohm, Criteria A) Altitude m 3,000m operating, 12,000m non operating Weight lbs 6.5 8.1 Size (WxHxD)(w/o bus bars) ins 4.25 x 4.75 x 10.25 5.62 x 4.75 x 10.5 Warranty yrs Five Years (1) Startup > 110VDC Notes: (Consult Installation Manual for detailed specifi cations, test methods and application notes) (*) Reduced power factor above 63Hz 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 77 Disclaimer: us.tdk-lambda.com/lp/legal.htm LZSA Series Derating Charts LZSA1500-3 LZSA1500-3-001 & LZSA1500-4 Output Power Derating vs Input Voltage Output Power Derating vs Input Voltage 1600 1600 1400 1400 1200 1200 1000 1000 800 800 600 600 400 400 200 200 0 0 AC Input Voltage AC Input Voltage 50C Ambient 50 & 60C Ambient 60C Ambient 70C Ambient 70C Ambient Options Outline Drawing (LZSA1500) Nominal Adjustment Maximum Maximum Voltage Range Current Power Model (V) (V) (A) (W) LZSA1000-2 12 10 - 15.75 84 1008 LZSA500-3 24 18 - 29.4 21 504 LZSA1000-3 24 18 - 29.4 42 1008 LZSA1500-3 24 18 - 29.4 63 1512 LZSA1500-3-001 24 18 - 29.4 63 1512 LZSA1500-4 48 36 - 56 31.5 1512 *Model highlighted in green is not recommended for new designs. Other Industrial Products HWS 15W to 1800W Single Output DLP, DPP, DSP 15W to 960W DIN Rail PFE 300W to 1000W Power Modules For Additional Information, please visit us.tdk-lambda.com/lp/products/lzsa-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 78 Revision B5: Jan 2012 5 8 95 105 115 125 135 145 155 165 175 185 195 205 215 225 235 245 255 265 85 95 105 115 125 135 145 155 165 175 185 195 205 215 225 235 245 255 265 Output Power (W) Output Power (W)