NEXCOM NEX 602-SKT
Specifications
Form Factor
Mini ITX
Ethernet Chipset
Realtek RTL8110SC
System Chipset
Intel ICH
Video Chipset
Intel 852GM
Audio
VIA VT1613 AC97 Codec. Support Line-out, Line-in, Mic-in
BIOS
Award System BIOS. 4M-bit fl ash ROM. Supports Soft off, Wake on LAN, RTC Alarm Power On and Power on after power failure
Certifications
CE approval
Chipset
Intel 852GM Graphics Memory Controller Hub (GMCH), Intel ICH4 I/O Controller Hub
CPU
Intel Pentium M / Celeron M processor with 400MHZ FSB. Intel Embedded Processor List (Intel Longevity CPU): Celeron M Processor (320 & 370), Pentium M Processor (745)), Pentium M Processor 1.6GHz. 400 MHz FSB support
Dimensions
Mini-ITX, 170 mm (L) x 170mm(W)
Display Interface
Intel 852GM GMCH Integrated, Max 64 MB of DVMT for graphics memory allocation. Analog VGA interface:1x DB15 VGA port, Resolution up to 1600x1200 at 85 Hz, 1920 x 1400 at 60Hz. LVDS interface: 1 x DF13 20-pin LVDS connector for internal connection
Ethernet
2 x Realtek RTL8110SC Gigabit Ethernet, Supports Boot from LAN (PXE) and Wake on LAN (When 5Vsb power available), 2 x RJ-45 Jack with LED
Expansions
1 x PCI slot
FCC Class A
System
I/O
USB 2.0: 6 ports. Serial port: 4 RS-232 ports, COM1~3 with DB9, COM4 with 2x5-pin box header(COM3 support RS-232/422/485). Parallel port:1 port, with 26-pin box header (2.0 mm) , Bi-directional, EPP/ECP. GPIO: Support 8 sets general purpose I/O each
Input
CF: 2 x Internal CompactFlash socket Support One Type I& II Compact Flash Card, IDE: 1 x 44-pin IDE connector, support Ultra ATA100/66/33
Memory
1 x 184-pin DIMM, Support Non-ECC / Non-Register DDR memory up to 1 GB
Operating Temperature
Board level operating temperature: 0C to 60C. Storage temperature: -20C to 85C. Relative humidity: Operating 10%~90%, non-condensing, Non-operating 5%~95%, non-condensing
Power Supply
Supports ATX / AT Mode (Default setting: ATX mode)
Processor
Intel Celeron M
RTC
On-chip RTC with battery backup, 1 x External Li-lon battery
System Monitor
4 voltages: +3.3V, +5V, +12V, Vcore 3 temperature: CPU, two external. Temperature Sensors 3 fans Speed: CPU and System FANs
Watchdog Timer
Watchdog Timer is programmable by software from 1 second to 255 seconds(Tolerance 15% under room temperature 25C)
Features
- 6x USB, 4x COMs and Dual CF sockets
- Dual Realtek RTL8110SC Gigabit Ethernet
- Intel 852GM + Intel 82801DB (ICH-4) Chipset
- One PCI-slot expansion
- Supports Intel Pentium M/Celeron M Processors with FSB 400MHz
- Various Display I/O via VGA/LVDS
Datasheet
Extracted Text
® ® ® Intel Pentium M/ Celeron M CPU with 1 x GbE LAN NEX 602 PCI Speaker out (Top) Line-in (Bottom) CF GbE LAN2 (Top) 2 x USB2.0 (Bottom) DDR, Max 1 GB GbE LAN1 (Top) 2 x USB2.0 (Bottom) IDE ® Intel ICH4 COM3 (Top) VGA (Bottom) ® Intel 852GM LVDS COM2 (Top) COM1 (Bottom) ® ® ® Supports Intel Pentium M/Celeron M processor up to1.8 GHz with 400 MHz FSB KB/MS ATX Power Conn. COM4 PIO Main Features ® ® ® Supports Intel Pentium M/Celeron M Processors with FSB One PCI-slot expansion 400MHz 6x USB, 4x COMs and Dual CF sockets ® ® Intel 852GM + Intel 82801DB (ICH-4) Chipset Dual Realtek RTL8110SC Gigabit Ethernet Various Display I/O via VGA/LVDS Product Overview NEX 602 is designed based on Mini-ITX main-board form factor (170mm x 170mm) and derived from NEX 600. The simplifi ed specifi cation of NEX 602 provides the ® ® ® ® cost-effective embedded board solution for system integrators. NEX 602 also supports Intel Pentium M / Celeron M series processors by Intel 852GM/ICH4 system chipset designed. Specifi cations CPU Support Supports Boot from LAN (PXE) and Wake on LAN (When 5Vsb power available) ® ® ® 2 x RJ-45 Jack with LED Intel Pentium M / Celeron M processor with 400MHZ FSB ® ® Intel Embedded Processor List (Intel Longevity CPU): Display ® Celeron M Processor (320 & 370) ® ® Intel 852GM GMCH Integrated, Max 64 MB of DVMT for graphics memory Pentium M Processor (745)) ® allocation Pentium M Processor 1.6GHz Analog VGA interface: 400 MHz FSB support 1x DB15 VGA port Main Memory Resolution up to 1600x1200 at 85 Hz, 1920 x 1400 at 60Hz 1 x 184-pin DIMM, Support Non-ECC / Non-Register DDR memory up to 1 GB LVDS interface: 1 x DF13 20-pin LVDS connector for internal connection Single (18bit) LVDS panel support Chipset CCFL interface:1x7-pin JST (2.54mm) for LCD Panel Backlight Inverter Power ® Intel 852GM Graphics Memory Controller Hub (GMCH) Audio ® Intel ICH4 I/O Controller Hub VIA VT1613 AC97 Codec BIOS Support Line-out, Line-in, Mic-in Award System BIOS I/O Interface 4M-bit fl ash ROM USB 2.0: 6 ports Supports Soft off, Wake on LAN, RTC Alarm Power On and Power on after power Serial port: 4 RS-232 ports, COM1~3 with DB9, COM4 with 2x5-pin box header failure (COM3 support RS-232/422/485) Parallel port:1 port, with 26-pin box header (2.0 mm) , Bi-directional, EPP/ECP On-board LAN ® GPIO: Support 8 sets general purpose I/O each with TTL level (0V/5V) interface 2 x Realtek RTL8110SC Gigabit Ethernet Mini-ITX CPU Boards Block Diagram Intel® Pentium® M / Celeron® M processor FSB 400MHz RGB Signal CRT OUTPUT Intel DDR 266 MHz 1 x DDR Slot 852GM 18bit or 24 bit LVDS OUT DMI AC'97 CF(Primary) CODEC IDE(Secondary) ATA 100/66/33 AC'97 Intel PCI 32Bit 33MHz USB2.0 6 x USB ICH4 LPC 33MHz LAN LAN PCI Slot RTL8110SC RTL8110SC IT8712 SIO IT8712 SIO COM3/COM4 COM1/COM2 3 x FAN RJ45 CON RJ45 CON FAN : 3 x fan JST (1x for CPU cooler, 2 x for System) Environment 1 x 5-pin header for IrDA Tx / Rx Board level operating temperature: 0°C to 60°C 1 x on-board buzzer Storage temperature: -20°C to 85°C 1 x 2-pin power on switch Relative humidity: 1 x 2-pin header for reset Operating 10%~90%, non-condensing Non-operating 5%~95%, non-condensing 1 x 2-pin header for power LED 1 x 2-pin header for HDD LED Certifications Storage CE approval FCC Class A CF: 2 x Internal CompactFlash socket Support One Type I& II Compact Flash Card IDE: 1 x 44-pin IDE connector, support Ultra ATA100/66/33 Ordering Information Expansion NEX 602-SKT (P/N: 10G00060200X0) RoHS Compliant 1 x PCI slot ® Mini-ITX Embedded Board with Intel 852GM Chipset, support μFC-PGA Socket ® ® type Pentium M / Celeron M Processor, Realtek GbE x2 / 2x CF socket/ PCI Watchdog Timer NEX 602-C65 (P/N: 10G00060201X0) RoHS Compliant Watchdog Timer is programmable by software from 1 second to 255 seconds ® ® Mini-ITX Embedded Board with Intel 852GM Chipset, with Celeron M (Tolerance 15% under room temperature 25°C) 600MHZ 512KB L2 ULV Processor Realtek GbE x2/ 2x CF socket/ PCI On-board RTC On-chip RTC with battery backup 1 x External Li-lon battery System Monitor 4 voltages: +3.3V, +5V, +12V, Vcore 3 temperature: CPU, two external Temperature Sensors 3 fans Speed: CPU and System FANs Dimensions Mini-ITX 170 mm (L) x 170mm(W) Power Input Supports ATX / AT Mode (Default setting: ATX mode) Mini-ITX CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the NEX 602-SKT?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Ultra Low power Embedded Board with Intel Atom E640 processor On-board DDR2 1GB memory, VGA/ LVDS, 1...

Low power Embedded Board with Intel Atom N270 processor and based on Intel 945GSE 3D graphics engi...

3.5" On-board Intel Atom N270 1.66GHz CPU with 24-bit LVDS/Gigabit LAN/CF, Low power Embedded Board...

Low power Embedded Board with Intel Atom Dual Core D525 processor support DDR3 SO-DIMM memory modul...

Low power embedded board with Intel Atom processor D2700 and based on Intel integrated graphics en...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods