NEXCOM 10E00035200X0
Specifications
Form Factor
EBC
Ethernet Chipset
Intel 82574L
System Chipset
Intel ICH8-M
Advanced Power Management
Advanced Configuration & Power Interface, 8M bits SPI ROM
Analog VGA interface
1 x DB15 VGA port, support up to 2048x1563@ 60Hz resolution, 2x DF-13 20-pin LVDS connector, support single (24-bit) or dual (48-bit) LVDS panel support
Audio
Realtek ALC888 CODEC for High Definition, 1 x Mic-in and 1 x Line-out Pin header
BIOS
AMI BIOS, Plug & Play support
CCFL interface
1 x 7-pin JST connector, 5V or 12V power source to enable LCD Panel backlight Inverter
Certifications
CE approval, FCC Class A
Chipset
Intel NH82801HBM (ICH8M)
CPU Support
On-board Intel Atom Dual Core D525 (1.8GHz, 1M Cache) processor
Dimensions
3.5" ECX form factor146mm (L) x 105mm (W) (5.7"x4.1")
Display
Intel D425/D525 integrated graphic engine, support Directx*9, with Intel Clear Video Technology on MPEG2 Hardware Acceleration
Expansion
1 x Mini-PCIe socket
I/O Interface
Serial port: 4 port; 1 x RS232 DB9 Connector; 2 x RS232 with 10-pin box header, 2.0mm pitch; 1 x RS232/422/485 (COM2) with 10-pin box header, 2.0mm pitch, USB 2.0: 6 ports; 2 ports with USB 2.0 connector; 4 ports with internal JST connector; 8 x GPIO, 10-pin pin header, (GPI 0~3 and GPO0~3) with TTL Level (0/5V), On-board Power LED and HDD Active LED Pin Header, 1 x 3-pin fan connector (for CPU), 1 x Keyboard/Mouse pin header
Main Memory
1 x 204-pin DDR3 SO-DIMM socket, DDR3 800 2GB Max., Non-ECC and Un-buffered
On-board LAN
2 x Intel® GbE LAN controllers, Support Boot From LAN (PXE) and Wake on LAN (WoL), 2 x RJ45 with LED
On-board RTC
On-chip RTC with battery backup, 1 x External Li-Ion battery
Operating temperatures
0°C to 60°C
Power Input
Support AT and ATX mode (ATX as the default)
Power requirement
+12 V DC Input, One 4-pin power connector
Processor
Intel Atom
Relative humidity
Operating 10% to 90%, non-condensing
Storage
2 x SATA connector (support 2.5” HDD and SATA DOM), 1 x CF socket
Storage temperature
-20°C to 85°C
System Monitor
Monitoring of 4 voltages and 2 temperatures, 4 Voltage (Vcore , +12V , +3.3V , +5V), 2 Temperatures (CPU, System)
Watchdog Timer
Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Features
- 4 x COMs, 6 x USB 2.0
- Dual Intel Gigabit Ethernet
- Single DC12V Power Input
- Support DDR3 SO-DIMM SDRAM, up to 2GB
- Support Intel Atom Dual Core D525 Processor
- Support PCI 104, 1x Mini PCI Express Socket
- Support VGA/ LVDS 18/ 24-bit Display
Datasheet
NEXCOM-EBC 352-datasheet.pdf
192 KiB
Extracted Text
® 3.5” ECX on-board Intel Atom™ D525 1.8GHz CPU EBC 352 Main Features ® Support PCI 104, 1x Mini PCI Express Socket Support Intel Atom™ Dual Core D525 Processor 4 x COMs, 6 x USB 2.0 Support DDR3 SO-DIMM SDRAM, up to 2GB Single DC12V Power Input Support VGA/ LVDS 18/ 24-bit Display Dual Intel Gigabit Ethernet Product Overview ® The EBC 352 is a 3.5” ECX board with an on-board Intel Atom™ dual core D525 with L2 cache 1MB and supports DDR3 SO-DIMM SDRAM module. It features dual display application to support independent CRT and LVDS 18/24-bit interface, dual Gigabit Ethernet, one PCI 104 and one mini PCI Express slot. Specifications 2048x1563@ 60Hz resolution CPU Support ® 2x DF-13 20-pin LVDS connector, support single (24-bit) or dual (48- On-board Intel Atom™ Dual Core D525 (1.8GHz, 1M Cache) bit) LVDS panel support processor CCFL interface: 1 x 7-pin JST connector, 5V or 12V power source to Main Memory enable LCD Panel backlight Inverter 1 x 204-pin DDR3 SO-DIMM socket, DDR3 800 2GB Max., Non-ECC Audio and Un-buffered Realtek ALC888 CODEC for High Definition Chipset 1 x Mic-in and 1 x Line-out Pin header ® Intel NH82801HBM (ICH8M) Expansion BIOS 1 x Mini-PCIe socket AMI BIOS I/O Interface Plug & Play support Serial port: 4 port Advanced Power Management 1 x RS232 DB9 Connector Advanced Configuration & Power Interface 2 x RS232 with 10-pin box header, 2.0mm pitch 8M bits SPI ROM 1 x RS232/422/485 (COM2) with 10-pin box header, 2.0mm pitch On-board LAN USB 2.0: 6 ports ® 2 x Intel GbE LAN controllers 2 ports with USB 2.0 connector Support Boot From LAN (PXE) and Wake on LAN (WoL) 4 ports with internal JST connector 2 x RJ45 with LED 8 x GPIO, 10-pin pin header, (GPI 0~3 and GPO0~3) with TTL Level (0/5V) Display ® On-board Power LED and HDD Active LED Pin Header Intel D425/D525 integrated graphic engine, support Directx*9, with 1 x 3-pin fan connector (for CPU) Intel Clear Video Technology on MPEG2 Hardware Acceleration 1 x Keyboard/Mouse pin header Analog VGA interface: 1 x DB15 VGA port, support up to On board Buzzer/ SMBus2.0/ Reset SW Fanless Computer LPC BUS DMI LVDS BUS LVDS BUS www.nexcom.com Block Diagram Pineview-D Microprocessor VGA >1.67GHz DX9 Graphics: 200 DDR3 Channel A DDR3 667/800 MHz SO-DIMM MHz DDR3 Memory Memory maximum support : 2G Controller XC3S200AN-4FTG256C LVDS LVDS CON LVDS (Single Channel) 18BIT TO 24/48BIT 18bit 18bit DMI x4 DMI SPI SPI SST25VF080B 4 Lanes 2Gb/s DMI SPI LVDS CON LVDS CON Rear Port 0/1 Gigabit Ethernet RJ45 LAN1 JST Con Port 2/3 USB 2.0 MDI Intel 82574L SUPPORT WAKE UP ICH8-M JST Con Prot 4/5 IN OUT PCIe x1 (82801GBM) Gigabit Ethernet 1ch 18bit 2ch 24bit MDI RJ45 LNA2 Scaler Intel 82574L 1280x800 1280x1024 652 balls 1ch 18bit 1ch 24bit 31x31mm UltraDMA Bypass Compact Flash 1ch 18bit 2ch 24bit MINIPCIe SATA (3) HDA LPC PCI BUS PCI 104 SATA PORT 1 SATA BUS SATA PORT 2 High Denition Audio Link COM1 RS-232 GPIO 4IN / 4OUT SUPPER I/O COM2 LINE-OUT IT8783F/AX-L RS-232/422/485 TPA6047A4RHBR HD Audio KB/MS COM3 AMP ALC888-GR RS-232 MIC COM4 RS-232 Thermal FAN Sensor Watchdog Timer Ordering Information Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% EBC 352 (P/N: 10E00035200X0) RoHS Compliant ® under room temperature 25°C) Low power Embedded Board with Intel Atom™ Dual Core D525 processor support DDR3 SO-DIMM memory module Storage 2 x SATA connector (support 2.5” HDD and SATA DOM) 1 x CF socket System Monitor Monitoring of 4 voltages and 2 temperatures 4 voltage (Vcore , +12V , +3.3V , +5V) 2 temperatures (CPU, system) On-board RTC On-chip RTC with battery backup 1 x External Li-Ion battery Power Input Support AT and ATX mode (ATX as the default) Power Requirements Power requirement: +12 V DC Input One 4-pin power connector Dimensions 3.5" ECX form factor 146mm (L) x 105mm (W) (5.7”x4.1”) Environment Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: Operating 10% to 90%, non-condensing Certifications CE approval FCC Class A 3.25 " CPU Board We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 01/05/2012 LVDS VGA ATA 100 (1) USB 2.0 (10) PCI PCI-E *1(6) DDR3 Ch A
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the 10E00035200X0?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Ultra Low power Embedded Board with Intel Atom E640 processor On-board DDR2 1GB memory, VGA/ LVDS, 1...
Low power Embedded Board with Intel Atom N270 processor and based on Intel 945GSE 3D graphics engi...
3.5" On-board Intel Atom N270 1.66GHz CPU with 24-bit LVDS/Gigabit LAN/CF, Low power Embedded Board...
Low power embedded board with Intel Atom processor D2700 and based on Intel integrated graphics en...
Low power embedded board with Intel Atom processor D2700 and based on Intel integrated graphics en...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods