5.25" VIA/Eden™/C7 Embedded CPU Board with EBC 580E Dual Display by LVDS and VGA/Gigabit LAN VIA CN700 LVDS CCFL PCI VIA 8237R+ CF COM Port CD-In Line-In Microphone in Speaker out VGA Parallel Port GbE x 2 DIMM USB USB2.0 Connector PS/2 connector Supports VIA Eden and C7 Power Input Standby 44-pin SATA Power select Processors Connector IDE Main Features Œ VIA Eden™/C7 with V4 Bus Processors On-board Œ Supports Dual Display by LVDS and VGA Œ VIA CN700 and 8237 R+ Chipsets Œ CompactFlash Socket Œ 1 x 240-pin DDR2 DIMM Socket Supports Un-buffered Non-ECC DDR2 533/400 up to 1GB Œ 2 x Realtek RTL8110SC Gigabit Ethernet Controller Product Overview The 5.25” EBC 580E embedded board computer is Based on VIA’s new generation of embedded CPUs featuring Eden™ (low power) , C7 (high performance) and also new VIA Nano processor . The EBC 580E incorporates a VIA CN700 and 8327R+ chipset. The VIA CN700 supports un-buffered non-ECC DDR2 533/400 memory up to 1GB and offers a powerful integrated graphics engine. The South Bridge 8327 R+ chipset provides a standard 32-bit/33 MHz PCI slot, parallel port, 44-pin IDE connector, SATA connector, CompactFlash socket, and numerous other I/O ports such as four serial ports, four USB 2.0 ports, two Gigabit Ethernet LAN ports, an audio interface, as well as others. The RoHS compliant EBC 580E is the enhancement version from EBC 580, keeping the same mechanical dimensions to share the same chassis with EBC 580board. The EBC 580E has many enhancement compared to the EBC 580, utilizing DDR2 memory, support USB 2.0 and SATA storage, integrated dual Gigabit Ethernet, and supports AT & ATX power supplies. Additionally, the new EBC 580E supports single wide range of LVDS panel ranging from 18-bit to 48-bit panels for cost down purpose. SpeciŢ cations CPU Support Audio Œ VIA, VT1613 CODEC for AC97 V 2.0 Œ VIA Eden™ V4 500 MHz Œ VIA Eden™ V4 1 GHz Œ MIC-in, Speaker-out, CD-in, Line-in Œ VIA C7 1.5 GHz Display Œ VIA Nano compatible Œ VIA VT1636 transmitter Main Memory Œ Analog VGA Interface: 1 x DB15 connector Œ 1 x 240-pin DIMM Socket for up to 1GB un-buffered non-ECC DDR2 533/400 Œ LVDS Interface: memory 2 x DF13 20-pin LVDS connector for internal connection, supports single (18bit) Chipset or dual pixel (36bit) LVDS panel ® ® Œ VIA CN700/VIA 8237R+ Œ CCFL: 1 x CCFL for LCD panel backlight inverter power BIOS I/O Interface Œ Award System BIOS Œ Serial port: 4 ports, with 1x 40 pin header, COM 2 for RS 232/422/485 Œ Supports Power On after power fail as a BIOS option Œ USB 2.0 x 4 Œ Supports Wake on LAN Œ Parallel port: 1 port, with 2x13 box header (2.0mm) Œ 4 Mbit fl ash ROM Œ PS/2: 1 x Mini-Din for Keyboard/Mouse Œ Digital I/O: 2x4 pin header (2.54mm) On-board LAN Œ IrDA: on-board pin header for IrDA Tx/Rx Œ 2 x 10/100/1000 network connection Realtek RTL8110SC Œ SMBus 2.0 controller Œ Each LAN port reserved with 2-pin header for extended LAN LED (Active, Link Œ On-board header for reset SW and HD active LED 100, and 1000 LAN LED) Œ I2C: On-board 3-pin header for I2C, one pin for GND Œ Supports Wake on LAN (When 5 Vsb power available). (LAN1 is available Œ 1 x DB15 VGA port for Wake up, LAN2 is not available for Wake up) 5.25” CPU Boards www.nexcom.com Block Diagram VIA Eden / C7 with V4bus Processors FSB800 6.4GB/Sec 2.1GB/S DDR2 400/533 VGA Port 3.2GB/Sec North Bridge 2.6GB/Sec DDR2 CN700 Slot FPD VT1636 LVDS1 VLINK 533MB/Sec 2 x SATA 150MB/S 60MB/S 6 x USB2.0 IDE CF 100MB/S South Bridge (Secondary) (Primary) VT8237R+ AC’ 97 LPC IrD Super IO VT1613 PCI BUS 133MB/Sec Parallel COM1 COM2 COM3 COM4 LAN1 LAN2 PCI Keyboard Port RTL8110SC RTL8110SC Slot Mouse RS422 RS485 Watchdog Timer AT Mode Œ Power Required: +5 V/+12 V Œ Watchdog timeout is programmable by software from 1 second to 64 seconds Œ No Power On push Button, No Software Shutdown function and No LAN1 remote On-board RTC wake up Œ On-chip RTC with battery back up Dimensions Œ 1 x External Lithium battery Œ 5.25" form factor 203mm (L) x 146mm (W) (7.9" x 5.7") Storage Environment Œ 1 x CF internal socket Œ Board level operating temperature: 0°C to 60°C Œ 1 x 44-pin connector (secdonary) Œ Storage temperature: -20°C to 80°C System Monitor Œ Relative humidity: 10% to 90% (Non-condensing) Œ Derived from Super I/O to support system monitor Certifi cations Œ Monitoring of 5 voltages, 3 temperatures and 2 fan speeds. Œ CE approval Œ 5 voltage (For +3.3 V, +5 V, +12 V, Vcore and +2.5 V) Œ FCC Class A Œ 3 temperature (For CPU and two external for system) Œ 2 fan speed ( one for CPU and one for systems) Ordering Information Power Input Œ 3-pin header for AT/ATX mode switch Œ EBC 580E-715 (P/N: 10E00580E00X0) Œ +3.3 V is converted from +5 V Low Power Embedded Board with VIA C7 CPU 1.5 GHz w/ VGA/Single LVDS/ Œ 6-pin power input connector Audio/4 COM/4 USB 2.0/Dual Gigabit LAN Œ 3-pin Jst connector to receive the 5 Vsb input from power source Œ EBC 580E-E10 (P/N: 10E00580E01X0) Œ Factory default setting is AT Mode Low Power Embedded Board with VIA Eden™ V4 Bus CPU 1 GHz w/ VGA/ Single LVDS/Audio/4 COM/4 USB 2.0/Dual Gigabit LAN Power Requirements Œ EBC 580E-E05 (P/N: 10E00580E02X0) CPU: VIA C7 1.5GHz/400MHz; Memory: 1 x DDR2 1GB +12 V +5 V Low Power Embedded Board with VIA Eden™ V4 Bus CPU 500MHz w/ VGA/ Full-Loading Mode 1.28 A 4.17 A Single LVDS/Audio/4 COM/4 USB 2.0/Dual Gigabit LAN Light-Loading Mode 0.36 A 1.71 A Œ Packing List NOTE: Part No. Description Full Loading: Utilize CPU 100% with Burn-in test running 60233MK202X00 PS2 Y CABLE Light Loading: Utilize CPU loading below 5% without application running 6023325262X00 PRINT CABLE ATX Mode 6023309402X00 COM CABLE L: 300mm 60233PW145X00 POWER CABLE Œ Power required: +12 V/+5 V/+5 Vsb 60233ATA17X00 SATA CABLE Œ Supports Power On push Button, Software Shutdown function and LAN1 remote wake up only 60233POW20X00 POWER CABLE Œ 2-pin Header for Power On Push Button 5.25” CPU Boards We reserve the right to change specifi cations and product descriptions at any time without prior notice. Last update: 05/25/2010