D302 Data Sheet - 2008-07-31 D302 - 6U CompactPCI® Card with 128 Binary I/Os n 1-slot CompactPCI® peripheral board n 4 optically isolated units n 32 channels for each unit n Individual use of each channel as input or output n Individual edge-triggered interrupts n Input/output load on ground n High-side output switches n Output current 1.9 A per channel or 16 A per unit n Over-current and over-temperature protection The D302 is an input/output CompactPCI® target board industrial systems. They are optically isolated from for 128 binary process signals. The I/Os are divided the system, which is essential for advanced automotive into four optically isolated units. The card is used and industrial applications. for input/output of digital signals with different voltage levels and ground references. For each unit 32 channels are driven to the 44-pin D-Sub connector. Each channel can be either input or output. The binary inputs/outputs can be universally used in ® 1 Embedded Solutions D302 Data Sheet - 2008-07-31 Technical Data Binary I/Os o +3.3V (3.2V..3.5V), 27mA n 128 binary signalso +24V (external supply voltage 12..32V), 78mA (total o 4 optically isolated unitsfor all units) o 32 channels for each unit n MTBF: 129,000h @ 50°C (derived from MIL-HDBK-217F) n Individual use of each channel as input or output n Individual edge-triggered interruptsMechanical Specifications n Input/output load on groundn Dimensions: standard double Eurocard, 233.3mm x 160mm n High-side output switchesn Weight: 324g n High output current o Max. 1.9A per channelEnvironmental Specifications o Max. 16A per unitn Temperature range (operation): n Over-current and over-temperature protectiono 0..+60°C or -40..+85°C o Airflow: min. 10m³/h Output Characteristics n Temperature range (storage): -40..+85°C n Output voltage range: 12V..32Vn Relative humidity range (operation): max. 95% without n Output current log. 0: max. 10mAcondensation n Output current log. 1: max. 1.9An Relative humidity range (storage): max. 95% without n Switching time for output change: < 200µscondensation n Isolation voltage (optocoupler): 500V DCn Altitude: -300m to + 3,000m n Shock: 15g/11ms Input Characteristicsn Bump: 10g/16ms n Input voltage min.: 0Vn Vibration (sinusoidal): 2g/10..150Hz n Input voltage max. external supply voltage (12..32V)n Conformal coating on request n Voltage level log. 0: 0V..6V or open n Voltage level log. 1: 12V..32VSafety n Input current log. 1: 2.03mA @ 24Vn PCB manufactured with a flammability rating of 94V-0 by n Switching threshold: 9.2V @ 0.78mA typ.UL recognized manufacturers n Switching time for input change: min. 33µs, max. 44µs n Excess voltage protection: max. +47VEMC n Tested according to EN 55022 (radio disturbance), Peripheral ConnectionsIEC1000-4-2 (ESD) and IEC1000-4-4 (burst) n Via front panel on four shielded 44-pin HD-Sub receptacle connectorsSoftware Support n MEN Driver Interface System (MDIS™ for Windows®, Linux, CompactPCI® BusVxWorks®, QNX®, OS-9®) n CompactPCI® peripheral slotn For more information on supported operating system o PICMG Spec. 2.0 R3.0 compliantversions and drivers see Software. o 32-bit data bus o 33MHz n V(I/O): +5V n Concurrent primary and secondary bus operation Electrical Specifications n Isolation voltage o 500V DC between isolated side and digital side o 180V DC between the channels o Voltage between the connector shield and isolated ground is limited to 180V using a varistor; AC coupling between connector shield and isolated ground through 47nF capacitor n Supply voltage/power consumption: o +5V (4.85V..5.25V), 106mA ® 2 Embedded Solutions D302 Data Sheet - 2008-07-31 Diagram ® 3 Embedded Solutions D302 Data Sheet - 2008-07-31 Ordering Information Standard Hardware 02D302-00 128-bit binary I/O controller, 0..+60°C Miscellaneous 05M000-14 M-Module cable, 2.5m, with 44-pin HD-Sub plug/housing to pig tail 05M000-20 M-Module cable, 2m with 44-pin HD-Sub plug/housing to 44-pin HD-Sub plug/housing, (connecting 1:1) 05M000-25 M-Module cable, 2m, with 44-pin half-pitch D-Sub plug/housing to 50-pin D-Sub receptacle/housing, (connecting 1:1) Software: OS independent 13M066-06 MDIS5 low-level driver sources (MEN) for M66, A302 and D302 Software: Windows 13M066-70 MDIS4/2004 / MDIS5 Windows driver (MEN) for M66, A302 and D302 Documentation 20APPN001 Application Note: Using MEN +5V CompactPCI Boards with +3.3V V(I/O) 20D302-00 D302 User Manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the D302 online data sheet under » www.men.de. ® 4 Embedded Solutions D302 Data Sheet - 2008-07-31 Contact Information Germany France USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro, Inc. Neuwieder Straße 5-718, rue René Cassin24 North Main Street 90411 NurembergZA de la ChâtelaineAmbler, PA 19002 Phone +49-911-99 33 5-074240 GaillardPhone (215) 542-9575 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Fax (215) 542-9577 E-mail info@men.deFax +33 (0) 450-955-211E-mail sales@menmicro.com www.men.deE-mail info@men-france.frwww.menmicro.com www.men-france.fr The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors or for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2010 MEN Mikro Elektronik GmbH. All rights reserved. ® 5 5 Embedded Solutions