GE Intelligent Platforms XCR14 nd ® 2 Generation Intel Core™ i7 Based Rugged CPCI Single Board Computer Features • BIOS backup Flash In addition to a comprehensive range of onboard I/O features, the XCR14 also offers two on-board • Optional on-board SATA HDD • Single slot 6U CPCI universal System/Peripheral mezzanine expansion sites for enhanced system • Optional conduction cooling board flexibility, both of which offer PMC and XMC • Optional extended operating temperature • Support for Hot Swap capability. Memory resources include up to 16 GB range • 2nd Generation Intel Core i7 dual and quad DDR3 SDRAM, 8 GB NAND Flash, optional SATA • Deployed Test Software core processors hard drive, BIOS Flash and BIOS backup Flash. • Windows®, Linux® and Real-Time OS • Integrated two channels up to 16 GB soldered support DDR3 SDRAM with ECC The XCR14 is designed to meet the requirements of a wide range of applications from industrial • Up to 6 MB shared cache through to fully rugged Defense and Aerospace The XCR14 Rugged Single Board Computer • Up to 8 GB NAND Flash (soldered) programs. It offers extended temperature (SBC) from GE Intelligent Platforms features the • Dual on-board Expansion Sites: two PCI-X PMC nd capability and a range of air and conduction high performance, highly integrated 2 and one x4, one x8 PCIe XMC cooled build levels. Generation Core i7 processor platform from • Front I/O: Intel. - 2x Gigabit Ethernet ports A rich software choice is planned for the XCR14, - 1x VGA including comprehensive Deployed Test Software 2nd Generation Core i7 offers integrated - 1x USB (BIT and BCS) plus OS support for Windows 7, graphics and memory controller plus dual and - 1x COM port Open Linux, Wind River Linux, VxWorks®. quad core processing up to 2.5 GHz all in one • Rear IO: device. Coupled with the Mobile Intel QM67 - 2x Gigabit Ethernet ports (PICMG 2.16) Express Chipset this provides an unmatched Specifications - 1x SDVO/VGA (2 ports possible if front IO not level of I/O bandwidth for both on-board and Processor required) off-board functions. nd • Intel 2 Gen. Core i7 Processor, options include - 2x DVI but are not limited to nd - Up to 4x SATA ports Features of the 2 Gen. Core i7 processor - i7-2715QE (Quad core) @ 2.1 GHz (45W) - 2x COM ports • Intel Intelligent Power Technology allows - i7-2655LE (Dual core) @, 2.2 GHz (25W) - 4x USB ports processors to operate at optimal frequency - i7-2610UE (Dual core) @, 1.5 GHz (17W) - 1x Audio and power. (Actual speed/power is dependent on - 13x GPIO environment) • Advanced Vector Extensions (AVX) signal - 2x PCI-X PMC (1333 MHz 64-bit I/O signals • 32nm monolithic die processing technology processing per site) • Last Level Cache - Intel's AVX doubles the vector register size - 6 MB (Quad i7) from 128 to 256 bits for up to a 2x FLOP - 4 MB (Dual i7) improvement SDRAM • Intelligent performance on-demand with • Maximum memory configuration of dual Intel Turbo Boost Technology channels up to 16 GB DDR3 SDRAM soldered • Multi-level shared cache improves with ECC performance and efficiency by reducing latency to frequently used data • Hyper-Thread Technology – 2 threads per core nd XCR14 Intel 2 Generation Core i7 Based Rugged CPCI Single Board Computer Block Diagram Specifications (continued) Flash Memory Soldered NAND flash array up to 8 GB • BIOS • 1x 16 Mb for BIT and BIOS plus 1x 16 Mb for redundancy Ethernet Dual Gigabit Ethernet interface via two Intel 82574 • Gigabit Ethernet controllers – routed to front panel • Dual Gigabit Ethernet interface via two Intel 82574 ® Gigabit Ethernet controllers – routed to rear (PICMG 2.16 compliant) USB Ports • Four USB 2.0 ports routed to rear J4 connector One USB 2.0 port routed to front panel • CompactPCI Backplane Interface • PICMG 2.0 R3.0 compliant CPCI local bus standard Serial Ports Three 16550 compatible full duplex async serial ports • • One routed to front panel RS-232 (COM3) • Two routed to J5, with user selectable RS-232/422/485 • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud PMC/XMC Expansion Up to two on-board mezzanine expansion sites • - Site 1 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x8 PCIe Gen 2) capable; routed to J3 - Site 2 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x4 PCIe Gen 2) capable; routed to J5 PCI signaling is 3.3V, 5V tolerant; +/- 12V mezzanine only • • 25W per site capable mezzanine power supply Audio High Definition Audio Codec • • Stereo line in and stereo line out Video LED (not in conduction-cooled style) Temperature Sensor One VGA port routed to front panel • Three status LEDs and four BIT status on front panel • Onboard ambient temperature; CPU • • One SDVO/VGA port routed to J4; can be two ports if • Two status LEDs on rear Other HW Features front I/O not used) Two DVI ports routed to rear I/O J4/J5 Power Requirements • Hardware Write Protection • • +5, +3.3V • Front power button LED SATA • +12V for mezzanine only • IPMI 2.0 Controller (PICMG 2.9) • Four SATA ports to rear I/O ; two on-board; one MRAM / Watchdog/ Real-Time Clock/ TPM Transition Module SATA/PATA • 512 kB non-volatile RAM (MRAM) • CTM20 GPIO SuperIO watchdog • Certification • 13 GPIO pins – software configurable • Real-time clock in Cougar Point PCH • CE On-board Hard Drive • SATA hard drive or SSD can be optionally ordered (precludes use of PMC/XMC site 2) Environmental Level 1 Level 2 Level 3 Level 4 Level 5 Cooling Method Convection Convection Convection Conduction Conduction Conformal Coating Optional Standard Standard Standard Standard High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall 2 2 2 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g /Hz** Shock 20g*** 20g*** 20g*** 40g*** 40g*** *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact defense.ge-ip.com ©2011 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 07.11 GFA-1783