GE Intelligent Platforms ACR301 Intel Atom Based Rugged 3U CompactPCI Single Board Computer The ACR301 Rugged Single Board Computer The ACR301 is designed to meet the require- Features (SBC) from GE Intelligent Platforms features ments of a wide range of applications from • 3U CompactPCI Rugged Single Board the ultra low power Intel Atom processor industrial through to fully rugged Defence Computer platform. Atom offers integrated graphics and Aerospace programs. It offers extended ® • Ultra Low Power Intel Atom Processor and memory controller plus processing up temperature capability and a range of air up to 1.3 GHz to 1.6 GHz. and conduction cooled build levels. • Integrated DDR2 memory controller as well as 3D graphics engine Features of the ACR301 Include: Available in five air- and conduction-cooled build levels, the ACR301 is fully supported • 512 KByte L2 Cache • Low power performance by comprehensive Deployed Test Software • 400 MHz Graphics clock • 1 GByte soldered DDR2 SDRAM (BIT and BCS) and OS support for VxWorks, • Four PCIe x1 • Up to 8 GByte NAND Flash (soldered) Windows and Linux. • Rear IO: The low power processor allows the ACR301 - 2x Gigabit Ethernet ports to provide substantial computing power in - 1x PMC I/O a compact form factor that fits into the sub - 1x VGA 10W application space. - 1x SATA port - 2x COM ports - 2x USB ports - 8x GPIO • Optional BIOS backup Flash • Optional conduction cooling • Optional extended operating temperature range ® • Operating system support for VxWorks , ® ® Linux, and Windows ACR301 Intel Atom Based Rugged 3U CompactPCI Single Board Computer Specifications Block Diagram Processor • Intel Atom Processor - 0.6 GHz (E620T) PCIe x1 cPCI Bus (32-33/66) - 1.0 GHz (E640T) 1 GB 800 MHz PCIe to PCI PEX PI17C9X130 - 1.3 GHz (E660T) J1 DDR2 DDR2 - 1.6 GHz (E680T) SDRAM SDVO 400 MHz VGA Memory SDVO-VGA Intel Atom • 512 KByte L2 cache Bus (Tunnel • Integrated DDR2 memory controller Boot PCIe x1 GigE • Integrated 3D graphics engine Creek) 82574 SPI Flash Chipset PCIe x1 PMC I/O PCIe to PCI PMC • Intel Platform Controller Hub EG20T PCI2 (32-33/66) 64-pins PEX8112 SDRAM ROM WP# LPC PCIe x1 • 1 GByte DDR2 SDRAM soldered 8 GPIO Flash Memory FPGA COM2 • Soldered NAND flash 8 GByte RS-485I/F SATA to J2 SATA 2x USB BIOS IDE NAND • The ACR301 BIOS and Video BIOS are provided in Bridge SATA reprogrammable flash memory I/O Chipset DIFF CAN (Top Cliff) CF/ND PMC PCA82C250 • Up to 64 pins of PMC I/O UART1 COM1 • 32-bit PCI bus RS-232I/F NAND • See Power Allowances section for voltage information x4 GigE Gigabit Ethernet PHY • 2 Gigabit Ethernet interfaces (One via Intel 82574 Gigabit Ethernet controller and one via I/O Chipset) • Both ports are routed to J2 JTAG USB Ports • Two USB 2.0 ports routed to J2 • Keyboard and mouse (PS2) emulation via USB Fabrc Interface • 32-bit/66 MHz cPCI data transfers Serial Ports Environmental • Two 16550 compatible full duplex async serial ports Level 1 Level 2 Level 3 Level 4 Level 5 • COM1 and COM2 routing to J2 Cooling Method Convection Convection Convection Conduction Conduction • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud Conformal Coating Optional Standard Standard Standard Standard SATA High/Low Temp 0 to 55°C -20 to +65°C -40 to +75°C -40 to +75°C -40 to +85°C • One Gen 2 (3 GB/s) SATA ports to J2 Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall GPIO 2 2 2 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g/Hz** • 8 GPIO pins – software configurable – to J2 Shock 20g*** 20g*** 20g*** 40g*** 40g*** Video • Integrated Intel 3D Graphics Engine **With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz ***Peak sawtooth 11 ms duration • SVGA: 640x480 to 1600x1200 (UXGA) pixel field, 32 bits/pixel Power requirements • +5 V, +3.3V • +3.3V (required on cPCI_J2 VBATT for RTC battery backup) About GE Intelligent Platforms Watchdog/Timers/RTC/Temp sensors • Two 16-bit timers and two 32-bit timers – software GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance programmable and capable of generating PCI bus technology company and a global provider of hardware, software, services, and expertise in automation interrupts and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology • RTC 146818 compatible with Li • CPU die and Chipset die, software readable that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms Transition Module is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. • ACR301-RTM For more information, visit www.ge-ip.com. Software • VxWorks • Linux GE Intelligent Platforms Contact Information • Windows • Deployed Test Software (BIT and BCS) Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 04.10 GFA-1689