GE Intelligent Platforms ACC-0602RC* Specifications VME Rear Transition Board Features: • Transitions V7865* I/O signals from the VME • Provides two standard USB 2.0 connectors P2 connector to standard I/O connectors • Provides DVI-D Video port (intended for legacy VME chassis) • 3U+ height, 80mm minimum depth • Provides one serial port connector (DB9), supporting both RS232 and RS485 • Provides two Serial ATA (SATA) connectors • RoHS Compliant† † NOTE: The ACC-0602RC is designed to meet the European Union (EU) Restriction of Hazardous Substance (RoHS) Directive (2002/95/EC) current revision. ACC-0602RC VME Rear Transition Board Physical/Environmental Specifications Ordering Options Dimensions: 3U single slot Eurocard format Sept. 28, 2010 800-9300800602-000 C A B C Height 4.97 in. (126.2mm) 0 0 ACC-0602RC – Depth 3.15 in. (80mm) AB = 0 (Options reserved for future use) Thickness 0.8 in. (20.3mm) C = Sales Special Order 0 = Without Conformal Coating Power Requirements: Power is supplied through the P2 on the 1 = With Conformal Coating VMEbus backplane. For Ordering Information, Call: Temperature: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 Commercial: 0° to 55° C Email: info.embeddedsystems.ip@ge.com Web Address: www.ge-ip.com Relative Humidity: 10% to 90%, noncondensing Copyright © 2010 GE Intelligent Platforms Embedded Systems, Inc. All Rights Reserved. Trademarks Specifications subject to change without notice. * indicates a trademark of GE Intelligent Platforms, Inc. and/or its affiliates. All other trademarks are the property of their Functional Characteristics respective owners. Overview: The ACC-0602RC* is designed to be used in conjunction with the V7865* VME single board computer (SBC). The ACC-0602RC mounts in the rear transition area of the backplane and provides access to the DVI-D video, USB, serial ATA, and COM2 port by way of the P2 connector. The ACC-0602RC is intended to be used in legacy VME chassis that will not support a full height rear transition board such as the ACC-0603RC*. The VME P2 connector carries all associated signals from the 6U front mount SBC through the backplane to the ACC-0602RC P2 connector (see Figure 1). Headers and Connectors: The serial port uses a standard DB9 connector. The USB and DVI-D use standard PC type connectors. The serial ATA connector on the front of the board is a single shielded connector. The serial ATA connector on the rear is a single internal connector that is not shielded. NOTE: Power connectors for I/O ports are not supplied by the ACC-0602RC. The ACC-0602RC does not supply power or ground for external drives. Serial Port: The ACC-0602RC provides a 16550 compatible serial port. The serial port has an independent 16-bit FIFO supporting baud rates up to 115 Kbaud. The serial port is available via a standard DB9 connector and is hardware-configurable to be either RS232 or RS485. 2 ACC-0602RC VME Rear Transition Board Figure 1. ACC-0602RC and Rear I/O with V7865 GE Intelligent Platforms Additional Resources Information Centers Americas: For more information, please visit the 1 800 322 3616 or 1 256 880 0444 GE Intelligent Platforms Embedded Systems web site at: Asia Pacific: 86 10 6561 1561 www.ge-ip.com Europe, Middle East and Africa: Germany +49 821 5034-0 UK +44 1327 359444 3