GE Intelligent Platforms VR12 Intel Core i7 Based Rugged VME Single Board Computer The VR12 Rugged Single Board Computer Features Specifications (SBC) from GE Intelligent Platforms features • 6U VME Single Board Computer Processor ® the high performance, highly integrated • Intel Core i7 32nm Processor, options include but are • Intel Core i7 Processor up to 2.53 GHz not limited to Core i7 processor platform from Intel. - Integrated two channel DDR3-1067 - ULV @ 1.06 GHz memory controller with ECC - LV @ 2.0 GHz Core i7 offers integrated graphics - Up to 4 MB shared cache - SV @ 2.53 GHz and memory controller plus dual core • Up to 4 MB shared cache • Up to 8 GB soldered DDR3 SDRAM with ECC • Integrated two channel DDR3-1067 memory processing up to 2.53 GHz all in one • Up to 16 GB NAND Flash (soldered) controller with ECC device. Coupled with the Mobile Intel • Dual on-board Expansion Sites: SDRAM QM57 Express Chipset this provides an - Two PCI-X PMC/ x8 PCIe XMC • Maximum memory configuration of up to 8 GB DDR3 unmatched level of I/O bandwidth for • Front IO SDRAM soldered with ECC - 2 x Gigabit Ethernet both on-board and off-board functions. Flash Memory - 1 x USB • Soldered NAND flash array up to 16 GB Features of the Core i7 processor - 1 x VGA - 1 x COM port • Intel Intelligent Power Technology UEFI (replaces BIOS) • The VR12 System UEFI includes all functions required • Rear IO allows processors to operate at optimal by the processor core and chipset - 2x Gigabit Ethernet ports (VITA31.1) frequency and power. • Will also support expansion ROM code for remote - 1x VGA (2 ports possible if front IO • Intelligent performance on-demand with booting from either of the dual Ethernet ports not required) Intel Turbo Boost Technology Ethernet - 2x DVI • Multi-level shared cache improves • Dual Gigabit Ethernet interface via two Intel 82574 - 2x SATA ports Gigabit Ethernet controllers – routed to front panel performance and efficiency by reducing - 2x COM ports • Dual Gigabit Ethernet interface via two Intel latency to frequently used data 82574 Gigabit Ethernet controllers – routed to rear - 2x USB ports • Hyper-Thread Technology – 2 threads (VITA31.1 compliant) - 12x GPIO per core - 2x PMC IO signals USB Ports ® • Streaming SIMD extensions 4.1/4.2 • Three USB 2.0 ports: one routed to front panel I/O, - IPMI 2.0, PICMG 2.9 and two to rear P2 connector • Optional BIOS backup Flash In addition to a comprehensive range of on- • Keyboard and Mouse (PS2) emulation via USB • Optional onboard SATA HDD board IO features, the VR12 also offers two VMEbus Backplane Interface • Optional Conduction cooling on-board mezzanine expansion sites for • 2eSST capable via TSi148 (ANSI/VITA 1.5-2003 • Optional extended operating tempera- enhanced system flexibility, both of which offering bandwidths up to 320 MB/s) ture range offer PMC and XMC capability. Memory Serial Ports • Single slot 6U VME64 form factor resources include up to 8GB DDR3 SDRAM, • Three 16550 compatible full duplex async serial ports • Compliant to IEEE STD 1101.2-1992 & 16GB NAND Flash, optional SATA Hard drive, - One routed to front panel RS232 (COM3) ANSI/VITA 20-2001, VITA 30.1 BIOS Flash and optional BIOS backup Flash ® - Two routed to P2, with user selectable • Operating system support for VxWorks , RS232/422/485 ® ® Linux, and Windows . The VR12 is designed to meet the require- • Ports feature independent 16-byte FIFO supporting ments of a wide range of applications from baud rates up to 115 Kbaud industrial through to fully rugged Defense and Aerospace programs. It offers extended temperature capability and a range of air and conduction cooled build levels. VR12 Intel Core i7 Based Rugged VME Single Board Computer Specifications (continued) Block Diagram PMC/XMC Expansion • Up to 2 on-board mezzanine expansion sites, both of Front I/O which are PMC (PCI-X up to 64bit /133MHz) and XMC (x8 PCIe Gen 2) capable COM3 • PCI signaling is 3.3V, with 5V tolerance when operated at 33 MHz Backup BIOS Video Super IO PLD IPMI • Provided via the integrated Intel Graphics Controller User Factory BIOS • One VGA port routed to front panel (or optionally to EEPROM EEPROM GPIO LPC COM2 COM1 rear panel) SPI P2 P2 P2 SMbus • One VGA port plus two TMDS (DVI-D) ports routed to rear IO (for use with VTM24) Gig Ethernet FDI 2/4 GB DDR3 • Any two ports can be used for dual display operation DMI Intel Gig Ethernet QM57 Express Core i7 SATA Chipset x8 2/4 GB DDR3 Gig Ethernet • Two SATA to rear IO (P0) Gig Ethernet GPIO x8 x4 • 12 GPIO pins – software configurable x4 MUX MUX IPMI x4 P0 P0 PCIe to PCIe to • Optional IPMI interface via Baseboard Management SATA PCIe to PCI-x PCI-x to PATA PCI-x Controller (PICMG 2.9) On-board hard drive XMC/PMC XMC/PMC Hard • 2.5” SATA hard drive or Flash disk can be optionally NAND Drive Site Site VME Flash Option ordered (precludes use of PMC/XMC site 2) Power requirements P1/P2 • +5, +3.3V (plus +12V/-12V if required by mounted PMC module) EEPROM / Watchdog / RTC / Timers / Temp sensors P2 P0 P1 • 512 kbit serial EEPROM for non-volatile user data • SuperIO watchdog • 146818 compatible with Li battery (battery not on conduction cooled variants) Environmental • Legacy PC-AT timer and HPET (High Precision Event Level A Level B Level C Level D Level E Timer) provided from Ibex Peak Controller Cooling Method Convection Convection Convection Conduction Conduction • CPU die and Chipset die, software readable Conformal Coating Optional Standard Standard Standard Standard Other HW features Operating Temp 0 / 55°C max -20 / +65°C max -40 / +71°C max -40 / +75°C max -40 / +85°C • Hardware Write Protection (rear pin) (For upper limit, please (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall • Front power button (and rear) consult manual) (dependent on CPU) (dependent on CPU) (dependent on CPU) (dependent on CPU) (dependent on CPU) • Three status LEDs and four BIT status LEDs at front, 2 2 2 2 2 Random Vibration 0.002g /Hz* 0.002g /Hz* 0.04g /Hz** 0.1g /Hz** 0.1g /Hz** two status LED signals at rear Shock 20g*** 20g*** 20g*** 40g*** 40g*** • IPMI 2.0 Controller (VITA 38) **With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz ***Peak sawtooth 11 ms duration • Compliant to IEEE STD 1101.2-1992 and ANSI/VITA 20-2001, VITA 30.1 Transition Module About GE Intelligent Platforms • VTM24 GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance Software technology company and a global provider of hardware, software, services, and expertise in automation • Support for Windows, Linux, VxWorks and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100. Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact. www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 05.10 GFA-1305 Gig E COM2 COM1 VGA 2 VGA 1 DVI 1 Gig E USB USB USB GPIO VGA 2 DVI 2 PMCIO SATA GigE GigE DVI 2 SATA SATA PMCIO