GE INTELLIGENT PLATFORMS VP12
Specifications
Form Factor
PICMG
Ethernet Chipset
Intel 82574ÂÂ
EEPROM / Watchdog / RTC / Timers / Temp sensors
146818 compatible with Li battery
512 kbit serial EEPROM for non-volatile user data
CPU die and Chipset die, software readable
Legacy PC-AT timer and HPET (High Precision Event Timer) provided from Ibex Peak Controller
SuperIO watchdog
Environmental Specifications
Please see Data sheet
Ethernet
Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to front panel
Dual Gigabit Ethernet interface via two Intel 82574 Gigabit Ethernet controllers – routed to rear (VITA31.1 compliant)
Flash Memory
Soldered NAND flash array up to 16 GB
GPIO
12 GPIO pins – software configurable
IPMI
IPMI interface via Baseboard Management Controller (PICMG 2.9)
Onboard hard drive
Up to two 2.5” SATA hard drives or Flash disks can be optionally ordered (precludes use of PMC site 2)
Other HW features
Compliant to IEEE STD 1101.2-1992 and ANSI/VITA 20-2001, VITA 30.1
Front power button (and rear)
Hardware Write Protection (rear pin)
IPMI 2.0 Controller (VITA 38)
Three status LEDs and four BIT status LEDs at front, two status LED signals at rear
PMC/XMC Expansion
PCI signaling is 3.3V, with 5V tolerance when operated at 33 MHz
Up to 2 onboard mezzanine expansion sites, one of which offers PMC (PCI-X up to 64bit /133MHz) and XMC (x8 PCIe Gen 2) capable. The other offers 64-bit / 66 MHz PMC
Power requirements
+5, +3.3V (plus +12V/-12V if required by mounted PMC module)
Processor
Integrated two channel DDR3-1067 memory controller with ECC
Intel Core
Intel Core i7 32nm processor, options include but are not limited to:ULV @ 1.06 GHz, LV @ 2.0 GHz, SV @ 2.53 GHz
Up to 4 MB shared cache
Will also support expansion ROM code for remote booting from either of the dual Ethernet ports
SATA
Two SATA to rear IO (P0)
SDRAM
Maximum memory configuration of up to 8 GB DDR3 SDRAM soldered with ECC
Serial Ports
Ports feature independent 16-byte
Three 16550 compatible full duplex async serial ports, One routed to front panel RS232 (COM3), Two routed to P2, with user selectable RS232/422/485
Software
Support for Windows, Linux, VxWorks
Transition Module
VTM24
UEFI (replaces BIOS)
The VP12 System UEFI includes all functions required by the processor core and chipset
USB Ports
Keyboard and Mouse (PS2) emulation via USB
Three USB 2.0 ports: one routed to front panel I/O, and two to rear P2 connector
Video
Any two ports can be used for dual display operation
One VGA port plus two TMDS (DVI-D) ports routed to rear IO (for use with VTM24)
One VGA port routed to front panel (or optionally to rear panel)
Provided via the integrated Intel Graphics Controller
VMEbus Backplane Interface
2eSST capable via TSi148 (ANSI/VITA 1.5-2003 offering bandwidths up to 320 MB/s) Serial Ports
Three 16550 compatible full duplex async serial ports
Features
- 2x on-board XMC Expansion sites
- 4x Gigabit Ethernet
- 6U VME SBC
- BIOS backup Flash
- Compliant to IEEE STD 1101.2-1992 & ANSI/ VITA 20-2001, VITA 30.1
- Dual slot 6U VME64 form factor
- Intel Core i7 Processor up to 2.53 GHz
- Mobile Intel QM57 chipset
- One or two optional onboard SATA HDDs
- Operating system support for VxWorks, Linux, and Windows
- Optional extended operating temperature range
- Up to 16 NAND Flash (soldered)
- Up to 8 GB DDR3 SDRAM with ECC
- Up to 8 GB soldered DDR3 SDRAM with ECC
Datasheet
Extracted Text
GE Intelligent Platforms VP12 Intel Core i7 Based Dual Slot Rugged VME Single Board Computer The VP12 Rugged Single Board Computer Features Specifications ® (SBC) from GE Intelligent Platforms features • Intel Core i7 processor up to 2.53 GHz Processor the high performance, highly integrated - Integrated two channel DDR3-1067 memory • Intel Core i7 32nm processor, options include but controller with ECC Core i7 processor platform from Intel. are not limited to: - Up to 4 MB shared cache - ULV @ 1.06 GHz - LV @ 2.0 GHz Core i7 offers integrated graphics and • Up to 8 GB DDR3 SDRAM with ECC - SV @ 2.53 GHz memory controller plus dual core processing • Up to 16 NAND Flash (soldered) • Up to 4 MB shared cache up to 2.53 GHz all in one device. Coupled • Dual onboard expansion sites: • Integrated two channel DDR3-1067 memory with the Mobile Intel QM57 Express Chipset - 1x PCI-X PMC / x8 PCIe XMC controller with ECC this provides an unmatched level of I/O - 1x PCI 66 MHz PMC SDRAM bandwidth for both on-board and off- • Front I/O • Maximum memory configuration of up to 8 GB DDR3 board functions. SDRAM soldered with ECC - 2 x Gigabit Ethernet - 1x USB Flash Memory Features of the Core i7 processor • Soldered NAND flash array up to 16 GB - 1x VGA • Intel Intelligent Power Technology allows - 1x COM port UEFI (replaces BIOS) processors to operate at optimal frequency • The VP12 System UEFI includes all functions required • Rear I/O and power. by the processor core and chipset - 2x Gigabit Ethernet ports (VITA 31.1) • Will also support expansion ROM code for remote • Intelligent performance on-demand with - 1x VGA (2x ports possible if front I/O booting from either of the dual Ethernet ports Intel Turbo Boost Technology not required) Ethernet • Multi-level shared cache improves per- - 2x DVI • Dual Gigabit Ethernet interface via two Intel 82574 formance and efficiency by reducing - 2x SATA ports Gigabit Ethernet controllers – routed to front panel latency to frequently used data - 2x COM ports • Dual Gigabit Ethernet interface via two Intel 82574 • Hyper-Thread Technology – 2 threads - 2x USB ports Gigabit Ethernet controllers – routed to rear (VITA31.1 compliant) per core - 12x GPIO • Streaming SIMD extensions 4.1/4.2 USB Ports - 2x PMC I/O signals ® • Three USB 2.0 ports: one routed to front panel I/O, - IPMI 2.0, PICMG 2.9 In addition to a comprehensive range of and two to rear P2 connector • BIOS backup Flash • Keyboard and Mouse (PS2) emulation via USB onboard IO features, the VP12 also offers • One or two optional onboard SATA HDDs two onboard mezzanine expansion sites VMEbus Backplane Interface • Optional extended operating for enhanced system flexibility. Memory • 2eSST capable via TSi148 (ANSI/VITA 1.5-2003 temperature range offering bandwidths up to 320 MB/s) Serial Ports resources include up to 8 GB DDR3 SDRAM, • Dual slot 6U VME64 form factor • Three 16550 compatible full duplex async serial ports 16 GB NAND Flash, one or two optional • Compliant to IEEE STD 1101.2-1992 & ANSI/ onboard SATA Hard drives, BIOS Flash and Serial Ports VITA 20-2001, VITA 30.1 • Three 16550 compatible full duplex async serial ports ® optional BIOS backup Flash. • Operating system support for VxWorks , - One routed to front panel RS232 (COM3) ® ® Linux, and Windows - Two routed to P2, with user selectable RS232/422/485 The VP12 is designed to meet the require- • Ports feature independent 16-byte FIFO supporting ments of a wide range of applications from baud rates up to 115 Kbaud industrial through to Defense and Aero- space programs. VP12 Intel Core i7 Based Dual Slot Rugged VME Single Board Computer Specifications (continued) Block Diagram PMC/XMC Expansion • Up to 2 onboard mezzanine expansion sites, one of Front I/O which offers PMC (PCI-X up to 64bit /133MHz) and XMC (x8 PCIe Gen 2) capable. The other offers 64-bit COM3 / 66 MHz PMC • PCI signaling is 3.3V, with 5V tolerance when Backup BIOS operated at 33 MHz Super IO PLD IPMI User Factory Video BIOS EEPROM EEPROM • Provided via the integrated Intel Graphics Controller COM1 GPIO LPC COM2 SPI P2 P2 P2 SMbus • One VGA port routed to front panel (or optionally to rear panel) FDI Gig Ethernet 2/4 GB DDR3 • One VGA port plus two TMDS (DVI-D) ports routed to DMI Intel Gig Ethernet QM57 Express Core i7 rear IO (for use with VTM24) Chipset 2/4 GB DDR3 x8 Gig Ethernet • Any two ports can be used for dual display operation Gig Ethernet SATA x8 x4 • Two SATA to rear IO (P0) x4 MUX MUX x4 GPIO P0 P0 PCIe to PCIe to SATA PCIe to PCI-x PCI-x • 12 GPIO pins – software configurable to PATA PCI-x IPMI XMC/PMC XMC/PMC 1x or 2x NAND • IPMI interface via Baseboard Management Hard Site Site VME Flash Drives Controller (PICMG 2.9) (optional) P1/P2 Onboard hard drive • Up to two 2.5” SATA hard drives or Flash disks can be optionally ordered (precludes use of PMC site 2) P2 P0 P1 Power requirements • +5, +3.3V (plus +12V/-12V if required by mounted PMC module) EEPROM / Watchdog / RTC / Timers / Temp sensors Environmental • 512 kbit serial EEPROM for non-volatile user data • SuperIO watchdog Level 1 Level 2 • 146818 compatible with Li battery Cooling Method Convection Convection • Legacy PC-AT timer and HPET (High Precision Event Timer) provided from Ibex Peak Controller Conformal Coating Optional Standard • CPU die and Chipset die, software readable High/Low Temp 0 to 55°C -20 to +65°C Other HW features Operational (300 ft/m) (300 ft/m) • Hardware Write Protection (rear pin) • Front power button (and rear) 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* • Three status LEDs and four BIT status LEDs at front, two status LED signals at rear Shock 20g** 20g** • IPMI 2.0 Controller (VITA 38) *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz • Compliant to IEEE STD 1101.2-1992 and ANSI/VITA 20-2001, VITA 30.1 **Peak sawtooth 11 ms duration Transition Module • VTM24 Software • Support for Windows, Linux, VxWorks About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 09.10 GFA-1731 Gig E COM2 COM1 VGA 2 VGA 1 DVI 1 Gig E USB USB USB VGA 2 GPIO DVI 2 PMCIO SATA GigE GigE DVI 2 SATA SATA PMCIO
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the VP12?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods