VMIVME-7050 ® ® IBM PowerPC VME Single Board Computer ® GE Fanuc’s VMIVME-7050 VME PowerPC -based single board computer (SBC) is highly integrated and versatile providing increased performance for demanding COTS and commercial OEM applications. Product Features ® Offering an IBM 750FX/GX PowerPC processor Additional VMIVME-7050 specifications: with up to 1 Mbyte on-chip L2 cache and • Up to 2 Gbyte SDRAM with ECC Support processor speeds up to 1.0 GHz, the VMIVME-7050 • 64.5 Mbyte total Bootable Flash delivers extremely high performance. The • Dual Gigabit Ethernet powerful IBM processor is mated with one of the • Two PCI-X capable PMC sites industry’s most powerful system controllers • Two high performance serial ports (Marvel Discovery II), yielding an impressive SBC • Ultra DMA IDE controller to CompactFlash design. The bandwidth through the system socket (Type 1) controller is maximized by using 2 Mbyte of SRAM • 64-bit PCI board-to-board connector for PMC as a revolutionary “cross-bar fabric switch” to and feature expansion allow “any-to-any” connectivity of up to 100 Gbps • Up to 1 Gbyte CompactFlash of aggregate throughput, with non-blocking • 32 Kbyte NVRAM concurrent connections among all of the • Real time clock ® peripheral channels at full bus speeds. • Operating system support for VxWorks , ® ® LynxOS and Linux The VMIVME-7050 features high speed, expansion capabilities, upgradability and built-in support for several GE Fanuc products including the PMC237CM1 expander card. The PMC237CM1 adds three PMC sites to this product for a total of five PMC sites using only two VMEbus slots. imagination at work VMIVME-7050 Specifications: • CPU • Ethernet • Other Interfaces — IBM PowerPC 750FX operating at 733 MHz or — Two 10/100/1000BaseT Ethernet ports — IDE support via optional P0 connector 750GX operating at 1 GHz ◊ 2 front, 2 rear P2, 1 front/rear P2 — Hardware reset via front panel — On-chip L2 cache — IEEE 802.3/802.3u/802.3x compliant — Four 32-bit programmable timers ◊ 750FX: 512 Kbyte — One 32-bit watchdog programmable timer • PMC Expansion ◊ 750GX: 1 Mbyte • VMEbus Interface — Two 133/100/66 MHz PCI-X PMC expansion • System Controller sites — Tundra Universe IID VMEbus interface — Marvell Discovery II (MV64360) ◊ PMC site #1 via front panel and optional — Built-in-Self-Test (BIST) rear P0 connector (high speed I/O - see • Front Panel Status LEDs • Operating System Support ordering options) — Power, IDE Activity, Reset — VxWorks ◊ PMC Site #2 via front panel and rear P2 — Debug #1, Debug #2: Available via software — LynxOS connector controlled GPIO — Linux — Support for one doublewide PMC module — Ethernet LAN link and activity status built — Auto-selects 3.3 V or 5 V I/O via built-in • Power Requirements into front panel RJ45 connectors hardware circuitry — +5 VDC (±5 %) • DRAM — Supports PMC expansion module, — +12 VDC (±5 %) PMC237CM1, for up to 3 additional PMC sites — Up to 2 Gbyte of PC2100 DDR memory with — -12 VDC (±5 %) ECC support • Serial Interfaces • Environmental Specifications • Flash Memory — Two RS232/422/485 serial channels — Operating: 0 to +60 °C — 64.5 Mbyte Flash ◊ One channel via front panel and P2 — Storage: -25 to +80 °C ◊ One channel via P2 only ◊ 64 Mbyte soldered onboard — Relative humidity: 10% to 90%, ◊ 512 Kbyte via PLCC32 socket — 16550-compatible noncondensing • CompactFlash • Mechanical Specifications — Up to 1 Gbyte of CompactFlash — 6U single slot Eurocard form factor — Height: 9.2 in. (233.4 mm) — Depth: 6.3 in. (160 mm) — Thickness: 0.8 in. (20.3 mm) Ordering Options August 3, 2004 800-007050-000 G A B C D E F VMIVME-7050 – A = Processor 0 = Reserved 1 = 733 MHz 750FX Processor 2 = 1.0 GHz 750GX Processor B = System DDR SDRAM with ECC 0 = 512 Mbyte 1 = 1 Gbyte 2 = 2 Gbyte C = Loading of VMEbus P0 0 = P0 not populated (No rear IDE or PMC#1 I/O) 1 = *P0 populated for high speed PMC#1 I/O and rear IDE D = CompactFlash/Microdrive 0 = No CompactFlash or Microdrive 1 = 64 Mbyte CompactFlash 2 = 512 Mbyte CompactFlash 3 = 1 Gbyte CompactFlash 4 = 1 Gbyte Microdrive E = 0 (Reserved) F = Special Sales Order 0 = VME standard 1 = 1101.10 front panel NOTE: *Before ordering a P0 populated option, ensure that the VMEbus chassis is P0 compatible. VMEbus Rear Transition Utility Boards VMIACC-7050, -7050A, -7050B and -7050C The VMIACC-7050 product family installs in the rear transition area of the VMEbus backplane and provides access to two Gigabit Ethernet ports, two serial ports and an optional CompactFlash. These are sold separately. Note All VME single board computer products come standard with a VME specification compliant front panel. For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 Email: info.embeddedsystems@gefanuc.com Web Address: www.gefanuc.com/embedded Copyright © 2004 by VMIC Specifications subject to change without notice. GE Fanuc Embedded Systems Information Centers Additional Resources USA and the Americas: For detailed technical specifications and product Huntsville, AL 1 (800) 322-3616 ordering information, please visit the GE Fanuc 1 (256) 880-0444 Embedded Systems web site at: www.gefanuc.com/embedded Europe, Middle East and Africa: Edinburgh, UK 44 (131) 561-3520 Paris, France 33 (1) 4324 6007 © 2005 GE Fanuc Automation, Inc. All rights reserved. All other brands or names are the property of their respective holders. Specifications are subject to change without notice. Rev. 2 3.05 GFA-580