VMIVME-7810 ® ® Intel Pentium M VME Dual Slot Single Board Computer ® ® GE Fanuc’s VMIVME-7810 brings together the power of Intel ’s Pentium M processor at speeds up to 1.8 GHz integrated with up to 4 Gbyte Dual Data Rate (DDR) SDRAM, Dual Gigabit Ethernet and a 133 MHz PCI-X internal bus to provide the highest level of data processing and handling capabilities in a VME form factor. Operating at 1.8 GHz, the VMIVME-7810 offers increased performance over a 2.2 GHz Pentium 4 Processor - M yet requires approximately 30% less power. This VME single board computer (SBC) is ideal for various purposes including communications and military/defense applications. Product Features GE Fanuc’s VMIVME-7810 is a high performance, Additional VMIVME-7810 features: dual slot, Intel Pentium M SBC with 2 Mbyte L2 • Up to 4 Gbyte SDRAM memory Advanced Transfer Cache, a 400 MHz system bus, • Two 10/100/1000BaseT Ethernet ports Micro-ops fusion, dedicated stack manager • 10/100BaseTX Ethernet port capabilities, and advanced instruction prediction • Dual channel SCSI support capability. These features are incorporated • SVGA/DVI-I with up to 1600 x 1200 resolution specifically to increase performance and • Two high performance serial ports throughput while reducing power demands. The • Enhanced parallel port two PMC expansion sites utilize the PCI-X bus to • Two USB ports provide higher I/O bandwidth than previously • Ultra DMA/100 IDE support available in a VMEbus SBC. The PCI-X bus provides • Up to 1 Gbyte CompactFlash up to 1 Gbyte/s bandwidth to support high speed • PS/2 style keyboard and mouse ports I/O devices such as Fibre Channel, Gigabit • Real time clock and miniature speaker Ethernet, SCSI, Reflective Memory and • 32 Kbyte NVRAM ® InfiniBand™. • Operating system support for Windows NT , ® ® ® Windows 2000, Windows XP, Linux , QNX , ® and VxWorks imagination at work VMIVME-7810 Specifications: • CPU • Graphics • Front Panel Status LEDs — Intel Pentium M processor with either — ATI Mobility Radeon 3D super VGA (SVGA) — Power/Reset 1.1 GHz, 1.6 GHz, or 1.8 GHz controller — IDE activity — Advanced L2 cache — 16 Mbyte SGRAM — Board status ◊ 2 Mbyte (1.8 GHz) — 264 Mbyte/s maximum data transfer rate — Attention ◊ 1 Mbyte (1.1 GHz, 1.6 GHz) — Up to 1600 x 1200 resolution — Ethernet LAN link and activity status built — 400 MHz system bus — DVI-I via front panel into front panel RJ45 connectors — Works with Intel E7501 memory controller • PMC Expansion • Operating System Support hub — Two 133/100/66 MHz PCI-X PMC expansion — Windows NT • SDRAM sites — Windows 2000 — Up to 4 Gbyte SDRAM via 2 DIMMs — Backward compatible with legacy 32-bit/ — Windows XP 33 MHz and 64-bit/66 MHz PMCs with 5 V/ — QNX • CompactFlash 3 V signaling — Linux — Up to 1 Gbyte of CompactFlash — VxWorks • Serial Interfaces • Ethernet • Power Requirements — Two 16550-compatible RS232 serial ports on — Two 10/100/1000BaseT Ethernet ports on front panel (two micro DB9 connectors) — +5 VDC (±5%) front panel — +12 VDC (±5%) — One 10/100BaseTX Ethernet port on front • SCSI Interface — -12 VDC (±5%) panel — Dual channel SCSI — Ethernet LAN link and activity status LEDs • Environmental Specifications ◊ Ultra320 support via front panel built into RJ45 connectors ◊ SCSI-2 support via P2 connector — Operating: 0 to +50 °C — IEEE 802.3/802.3u/802.3x compliant — Storage: - 40 to +80 °C • Other Interfaces — Relative humidity: 10% to 90%, — Two USB 1.1 ports via front panel noncondensing — Two PS/2 ports for keyboard and mouse on Ordering Options front panel • Mechanical Specifications — Ultra DMA/100 IDE support via P2 connector — 6U double slot Eurocard format October 7, 2004 800-007810-000 F A B C D E F — One IEEE-1294 parallel port on front panel — Height: 9.2 in. (233.4 mm) VMIVME-7810 – 0 0 A = Processor (micro DB25 connector) — Depth: 6.3 in. (160 mm) 0 = Reserved 1 = 1.1 GHz Pentium M Processor — Floppy disk support via P2 connector — Thickness: 1.6 in. (40.6 mm) 2 = 1.6 GHz Pentium M Processor — Hardware reset on front panel 3 = 1.8 GHz Pentium M Processor B = SDRAM Memory — Programmable watchdog timer 0 = Reserved 1 = 512 Mbyte — Two 16-bit timers and two 32-bit timers (all 2 = 1 Gbyte 3 = 2 Gbyte programmable) 4 = 4 Gbyte C = CompactFlash 0 = No CompactFlash 1 = 128 Mbyte CompactFlash 2 = 256 Mbyte CompactFlash 3 = 512 Mbyte CompactFlash 4 = 1 Gbyte CompactFlash D = 0 (Reserved for future use.) E = 0 (Reserved for future use.) F = Special Sales Order 0 = VME standard 1 = 1101.10 front panel Connector Adapters Adapter Length Part Number Micro DB9 to Standard DB9 4 inches 360-010050-001 Micro DB25 to Standard DB25 4 inches 360-010051-000 VMIACC-0045 Cable Kit contains: Qty. 2 – Micro DB9 to Standard DB9, 4 inches Qty. 1 – Micro DB25 to Standard DB25, 4 inches VMEbus Rear Transition Utility Board VMIACC-0562 The VMIACC-0562 installs in the rear transition area of the VMEbus backplane. The VMIACC-0562 is sold separately. Note All VME single board computer products come standard with a VME specification compliant front panel. For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 Email: info.embeddedsystems@gefanuc.com Web Address: www.gefanuc.com/embedded Copyright © 2004 by GE Fanuc Embedded Systems Specifications subject to change without notice. GE Fanuc Embedded Systems Information Centers Additional Resources USA and the Americas: For detailed technical specifications and product Huntsville, AL 1 (800) 322-3616 ordering information, please visit the GE Fanuc 1 (256) 880-0444 Embedded Systems web site at: www.gefanuc.com/embedded Europe, Middle East and Africa: Edinburgh, UK 44 (131) 561-3520 Paris, France 33 (1) 4324 6007 © 2005 GE Fanuc Automation, Inc. All rights reserved. Intel and Pentium are registered trademarks of Intel Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation. CompactPCI and PICMG are registered trademarks of PCI Industrial Computer Manufacturers’ Group. All other brands or names are the property of their respective holders. Specifications are subject to change without notice. Rev. 1 3.05 GFA-581