GE INTELLIGENT PLATFORMS VME-7700RC
Specifications
Form Factor
VME
Ethernet Chipset
Intel 82551
System Chipset
Intel 815
Video Chipset
Intel 815E
Airflow
Forced air cooling required, 350 LFM minimum, measured at the outlet of the heatsink
Altitude
Storage: 0 – 40,000 ft. (12,000 m)
BIOS
The VME-7700RC System BIOS and Video BIOS are provided in reprogrammable memory.
Compact Flash
CompactFlash up to 1 GB with the socket on the assembly, CompactFlash may be configured as the boot device through the BIOS boot device set-up
Dimensions
6U (4HP) single slot Eurocard form factor, Height 9.2 in. (233.4 mm), Depth 6.3 in. (160 mm), Thickness 0.8 in. (20.3 mm)
Ethernet
Two 10BaseT or 100BaseTX Ethernets are routed to front panel RJ45 connectors, Two Intel 82551ER Ethernet controllers on-board
Humidity
Storage relative humidity 5% to 95%, noncondensing
MTBF
Hours: 431,524.76
Note
Does not include PMC site for power requirements
PMC Extension Slot
One 5 V PMC expansion site (IEEE 1386.1)
Power Requirements
+5 VDC (±5 percent), 4.0A (typical), 5.4A (maximum), +12 VDC (±5 percent), Less than 1mA, -12 VDC (±5 percent, Less than 1mA
Processor
Intel Celeron
Intel Ultra Low Voltage Celeron at 400 MHz or 650 MHz, Favorable thermal characteristics, Up to 256 Kb of on-die L2 cache, 100 MHz system and memory bus
Programmable Timers
Two 16-bit timers and two 32-bit timers, Mapped in PCI memory space, Completely software programmable and can generate PCI bus interrupts
SDRAM
Maximum memory configuration of 512 MB PC-100
Serial Ports
Two 16550 compatible serial ports via two Micro DB9 connectors on the front panel, Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud, Both ports are configurable for both RS232/422
Temperature
Storage: -40 to +80° C
USB Ports
Two USB ports both routed to front panel, Supported USB features include: isochronous data transfers, asynchronous messaging, self-identification and configuration of peripherals, and dynamic (hot) attachment
VMEbus Backplane Interface
Tundra Universe II supporting VME64 modes: A32/ A24/D32/D08(EO)/MBLT64/BLT32
Watchdog Timer
Programmable Intervals, Interrupt and board reset triggers
Features
- 100 MHz system bus
- Dual Ethernet controllers supporting 10BaseT and 100BaseTX
- Intel Ultra Low Voltage Celeron Processor at 400 MHz or 650 MHz
- Mouse, Keyboard, and SVGA routed to front panel
- One PMC expansion site
- Remote Ethernet Booting
- Two high performance 16550-compatible serial ports
- Two USB ports
- Up to 1 GB CompactFlash
- Up to 512 Mb SDRAM
Datasheet
Extracted Text
GE Fanuc Embedded Systems VME-7700RC ® ® Intel Ultra Low Voltage Celeron VMEbus Single Board Computer The VME-7700RC Is a 6U, single slot VME single Features Specifications board computer (SBC) that delivers high perfor- • Intel Ultra Low Voltage Celeron Processor at Processor mance with low power consumption and offers a 400 MHz or 650 MHz • Intel Ultra Low Voltage Celeron at 400 MHz or wide operational temperature range from • Up to 512 Mb SDRAM 650 MHz 0 to +70° C. Based on Intel’s Ultra Low Voltage • Favorable thermal characteristics • Up to 1 GB CompactFlash Celeron processor and 815 chipset, the • Up to 256 Kb of on-die L2 cache • 100 MHz system and memory bus • One PMC expansion site VME-7700RC is available at 400 MHz or 650 MHz and Includes up to 512 Mbyte PC-100 SDRAM, a • 100 MHz system bus SDRAM PMC expansion site for additional I/O, and up to • Maximum memory configuration of 512 MB PC-100 • Dual Ethernet controllers supporting 10BaseT 1 GB Compact Flash. and 100BaseTX Compact Flash • CompactFlash up to 1 GB with the socket on • Remote Ethernet Booting The Embedded Intel Architecture ultra low voltage the assembly processor combines a 100 MHz processor side • Two high performance 16550-compatible • CompactFlash may be configured as the boot device bus with 256 Kbyte of on-die L2 cache to offer through the BIOS boot device set-up serial ports faster transfer of data, increasing performance • Two USB ports BIOS significantly. The processor’s small form factor • The VME-7700RC System BIOS and Video BIOS are • Mouse, Keyboard, and SVGA routed to μFCBGA package makes the VME-7700RC an provided in reprogrammable memory. front panel ideal embedded solution for low power and Ethernet thermally sensitive applications, Including military • Two 10BaseT or 100BaseTX Ethernets are routed to and defense. front panel RJ45 connectors • Two Intel 82551ER Ethernet controllers on-board USB Ports • Two USB ports both routed to front panel • Supported USB features include: isochronous data transfers, asynchronous messaging, self-identification and configuration of peripherals, and dynamic (hot) attachment VMEbus Backplane Interface • Tundra Universe II supporting VME64 modes: A32/ A24/D32/D08(EO)/MBLT64/BLT32 LPC IDE 32-bit/33 MHz PCI Bus ® ® VME-7700RC Intel Ultra Low Voltage Celeron VMEbus Single Board Computer Serial Ports Block Diagram • Two 16550 compatible serial ports via two Micro DB9 connectors on the front panel • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud • Both ports are configurable for both RS232/422 PMC 2 x 10/100 Interface Ethernet COM 2 COM 1 2 x USB SVGA PMC Extension Slot Keyboard / Mouse • One 5 V PMC expansion site (IEEE 1386.1) Programmable Timers • Two 16-bit timers and two 32-bit timers • Mapped in PCI memory space • Completely software programmable and can gener- National ate PCI bus interrupts Intel 82551 Semiconductor Ethernet Super I/O Controller Watchdog Timer • Programmable Intervals • Interrupt and board reset triggers FWH Intel 815E Chipset Intel 82551 Ethernet Dimensions Controller • 6U (4HP) single slot Eurocard form factor Intel • Height 9.2 in. (233.4 mm) Intel 82801BA Intel 82815 Ultra Low ICH2 GMCH Voltage • Depth 6.3 in. (160 mm) Celeron • Thickness 0.8 in. (20.3 mm) PMC Site Power Requirements • +5 VDC (±5 percent), 4.0A (typical), 5.4A (maximum) CompactFlash FPGA Timer, • +12 VDC (±5 percent), Less than 1mA Socket PC-100 Watchdog, SDRAM • -12 VDC (±5 percent, Less than 1mA NVRAM SODIMM Note: Does not include PMC site for power requirements Control Tundra Airflow Universe II • Forced air cooling required • 350 LFM minimum, measured at the outlet of NVRAM VME Endian Conversion the heatsink Temperature • Operating: 0 to +70° C P2 P1 • Storage: -40 to +80° C PMC I/O Altitude Floppy IDE • Operating: 0 – 10,000 ft. (3,000 m) • Storage: 0 – 40,000 ft. (12,000 m) Humidity Ordering Information • Operating: relative humidity 5% to 95%, noncondensing • Storage: relative humidity 5% to 95%, noncondensing VMIVME-7700RC-12x000: 6U VME ULV Celeron 650 MHz, 512 MB SDRAM, RoHS compliant MTBF VMIVME-7700RC-01x000: 6U VME ULV Celeron 400 MHz, 128 MB SDRAM, RoHS compliant • Hours: 431,524.76 About GE Fanuc Embedded Systems GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 06.07 GFA-582
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the VME-7700RC?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods