����������������� �������� �������������������� ���� The VME-1553 provides new levels of performance and flexibility for MIL-STD- �������� 1553A and B Notice II on the VMEbus. Available in commercial, industrial and 1, 2 or 4 Independent conductively cooled versions with one , MIL-STD-1553 Channels two or four dual-redundant channels, � Multi-function Features the VME-1553 includes advanced API - Simultaneous Bus Controller, (Application Programming Interface) 31 Remote Terminals, or Bus software that reduces application Monitor development time. Standard features � Single-function Features include selectable transformer or direct - Bus Controller, 31 Remote coupling, 1 MB of RAM per channel, Terminals, or Bus Monitor 45-bit message timetagging, triggers, extensive BC & RT link-list structures, � Bus Controller - BC error detection/insertion, advanced BC - BC->RT, RT->BC, RT->RT functionality, automatic/manual RT - Mode Codes, Broadcast and status bit and Mode Code responses. single-shot messaging Provides host software synchronization - Programmable time delays to pulses from external timing sources - Major/Minor frames (IRIG, GPS, etc). The VME-1553 Bus - Real-time conditional branching Monitor provides unparalleled error - Two aperiodic messaging detection and 100% monitoring of methods fully loaded buses. � Remote Terminal - RT - RT data wrapping ������������������������� - Multiple RT buffers - Dynamic Bus Control - Automatic Mode Code and VME-1553 multi-function interfaces are status bit responses easily configured to operate with - Programmable response time �������� simultaneous Bus Controller, 31 � Bus Monitor - BM Remote Terminals and Bus Monitor. - Full error detection Condor provides our advanced 1553 - Multiple monitoring methods API in source code, along with support - 45-bit time-tagging �������������������������� for Windows XP , 2000, Me, NT, 98, 95, - Adv. interrupts and triggers Linux and VxWorks. LabVIEW and � Architecture Solaris support is available. Contact Single-function VME-1553 interfaces - BC & RT error injection/ factory for other options. To access have all the features and functionality detection 1553 functionality without software of the multi-function versions, but only - DYNAMIC architecture development, BusTools/1553, Condor’s one major operational mode is - BC & RT link list structures MIL-STD-1553 bus analysis, simulation enabled at a time. Each interface can - 1 Mbyte RAM per channel and data logging/monitoring solution is emulate either a Bus Controller or 31 - Direct & transformer coupling available using our integrated Remote Terminals or Bus Monitor. - Onboard diagnostic bus PCIMXI-2 support. (non-ruggedized boards only) - Environmental options � Software Support - Advanced, high-level API - Source code included - BusTools Analyzer supported 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 �������� ����������������� �������������������� ���� �������������� ��������������������� *������������� �������� ■ 6U VME card ■ Programmable control over: - Major and minor frame content and timing ������������� - Intermessage gap times ■ Standard op. temperature range: 0° C to +70° C - Response time-out and late response ■ Extended temperature range:-40° C to +85° C - Multiple BC retry ■ 5 to 90% relative humidity (non-condensing) ■ Modify messages, data or setup while card is running ■ Conductively cooled format available ■ Insert aperiodic messages into a running BC list �������� ■ “Oneshot” mode for simplified BC operation ■ Conditional message sequencing based on real-time ■ API - High-level libraries with source code included message data or status - Operating systems supported: Windows XP , 2000, Me, ■ Selectable interrupt generation and status messages NT, 98, 95, Linux, VxWorks and other operating - Full range of system conditions systems - All detected errors ■ GUI - Optional support for BusTools/1553 GUI bus analyzer ■ Full error detection with PCI-MXI-2 (mf boards only) - Invalid word - Late response ■ Solaris and LabVIEW support available - Bit count error - Early response ����������� - High word - No response ■ Programmable direct or transformer coupling - Low word - Incorrect RT address ■ Transition cabling to BJ70 jacks included - Inverted sync - Parity error ■ ■ Input and output triggers: 2 BNC male connectors Extensive programmable error injection (on a per word basis) ■ ■ Variable output voltage available Synchronize BC operation to external time source �������������������������������� �������+������� ■ Simultaneous BC, 31 RTs and BM ■ Multiple RT simulation (up to 31 RTs) ■ Programmable error injection (on a per word basis) ��������������������������������� ■ Modify data, status words or setup while card is running ■ BC or 31 RTs or BM ■ Programmable message content (linked message buffers) ■ ����������������� � Interrupts can be generated on a per message basis upon End of Message and error conditions ■ 1 Mbyte per dual-redundant channel *���������� ������!������������"�#$%�����������& ■ Capture 100% fully loaded bus traffic with: ■ +5 VDC: 10 W (avg) - Time-tagging - Error status ’�������� - Word status - Message status ■ - RT response time A16, A24, A32 addressing ■ ■ Interrupts can be selected by RT / SA / WC D16, D32 data transfer ■ ■ Extensive filtering and triggering options VXI MODID supported - By individual RT/subaddress (�������)�3 year limited hardware warranty - Transmit, receive or broadcast mode codes No cost library and driver upgrades - Internal or external triggering ��������� � �������������� - Trigger output on user specified data ■ Real-time bus playback with RT edit mode ���������� MIL-STD-1553 multi-function, single channel, ■ 45-bit, microsecond resolution timetagging variable voltage, 6U VME interface board ■ Host software synchronization to external timing sources ����������� MIL-STD-1553 multi-function, two channel, variable voltage, 6U VME interface board ����������� MIL-STD-1553 multi-function, four channel, ������������ MIL-STD-1553 single-function, four channel, fixed variable voltage, 6U VME interface board voltage, 6U VME interface board ����������� MIL-STD-1553 single-function, single channel, ��������� Ruggedized*, extended operating temperature fixed voltage, 6U VME interfaceboard option (-40° C to +85° C) ������������ MIL-STD-1553 single-function, two channel, ��������� Ruggedized*, extended operating temperature with fixed voltage, 6U VME interface board conductive cooling option A channel is a dual-redundant A/B pair. * Ruggedized versions do not include onboard diagnostic bus. See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. VME-1553 4/06 Tel 805.965.8000 Fax 805.963.9630