VC7 ® ® Celeron Pentium III PC 3U VMBus Embedded Computer Features ® ® • Intel Celeron 566–733 MHz ® ® • Mobile Intel Pentium III 333–466 MHz • Ultra-compact all-in-one PC • Double VME slot with front and rear I/O ® • Windows Embedded NT, ® Windows 2000/NT, QNX, ® VxWorks , and Linux • 1.8-in. FlashDrive up to 2 GB • VGA/LCD resolutions up to 1600 x1200 and 4(2) MB high-speed SDRAM • Fast Ethernet 10/100 Mbit • SCSI up to 20 MB/s • PCI bus enhanced IDE VC7 is a VMEBus all-in-one 3U Single Board Computer (SBC) designed to meet • CANbus for low cost I/O the needs of embedded application developers serving such markets as industrial automation, medical, scientific, imaging, military, and aerospace. The VC7 supports • Serial ATA port ® such operating systems as Windows 2000/NT, ONX, VxWorks, and Linux. • Four serial I/O with FIFOs The ultra-compact all-in-one concept with flexible processor and RAM configurations, RS-232 or RS-422 interface front and rear I/O, and a full array of on-board peripherals including a video interface, • Two IEEE 1284 parallel fast Ethernet, and a SCSI interface combined with custom assembly for specific ports applications provides optimized price/performance for all kinds of OEM applications. • Two USB ports Increased shock and vibration immunity, rugged compact 3U design, extended temperature range (-40° C to 70° C), and a LCD interface make the VC7 ideal for • Watchdog extreme operating environments. • NMI ticker Special features include four serial channels with flexible RS-232 and RS-422 • Temperature sensor interfacing, a CANBus device for low-cost I/O, and single +5V supply. • Single +5V supply • Extended temperature range (-40° C to 70° C) • Low-cost special-application assembly Single Board Computers VME Bridge Specifications • Tundra Universe III • Industry standard CA91C142B PCI to VMEBus Controller • Full VMEBus system controller, FIFOs for write posting Processor ® ® • DMA Controller with linked list support • Intel Celeron 566–733 MHz ® ® • Master/slave transfer modes: BLT, ADOH, RMW, LOCK, • Mobile Intel Pentium III 333–466 MHz RETRY, A24/ A16 and D16 / D8 • High-efficiency on-board switching DC/DC regulator • Fanless cooling with heatsink Fast Ethernet • AMD 79C972 Processor Performance Winstone 99 • 10/100 Mb/s controller with PCI local bus DMA CPU Frequency Business High-End • 12 KB FIFO transmit and receive buffers Mobile Pentium III 333 MHz 15.0 22.7 • Transfer rate auto-negotiation Mobile Pentium III 466 MHz 16.4 27.0 Celeron 566 MHz 21.1 31.8 EIDE I/O Celeron 733 MHz 23.0* 38.0* • UltraDMA/33 sync. DMA mode up to 33 MB/s • PIO Mode 4 and bus master IDE up to 16 MB/s Tested with 128 MB RAM, 1024 x 768 64K color, and ST34502LW HD • Support for three devices via EIDE connector and rear I/O * Estimated CAN I/O Cache • Support for CAN 2.0 specification CPU Level 1 Level 2 • Opto-isolated (500 VDC) high-speed ISO 11898 interface Celeron* 32 KB 128 KB (full speed) Serial I/O Pentium III * 32 KB 256 KB (full speed) • Four async. 16550-compatible full-duplex serial channels * Also valid for Mobile processor • High-speed transfer up to 115.2 Kbaud with 16-byte FIFOs • COM1+2: RS-232 or RS-422 interface Chipset • COM 3+4: RS-232 or RS-422 interface ® • Intel 82443BX, 82371EB ® ® ® • 66 MHz system bus with Intel Celeron and Mobile Intel Parallel I/O Pentium® III • Two bi-directional IEEE 1284-compatible enhanced parallel • PCI burst mode transfers >100 MB/s ports (including EPP and ECP) for printer or general purpose • 32-bit 33 MHz PCI Bus interface I/O ® Intel 6300ESB I/O Controller Hub Floppy Drive • Two 32-bit PCI Bus interfaces • Single channel 3.5-in. floppy drive controller 720 and 1.44 MB • LPC (Low Pin Count) interface • UltraDMA100 IDE Bus interface USB Ports • Serial ATA Host Controller • Two 12 Mb/s USB channels • USB 2.0 Host Controller • 12 GPIO control lines Keyboard and Mouse Port • PS/2 compatible keyboard and mouse port on front panel • Real-Time Clock • SMBus interface Real-Time Clock • Watchdog timer • RTC 146818-compatible, on-board Li-battery • Interrupt controller • Four 32-bit general-purpose timers (cascade able to 64-bit) CMOS RAM • 114 bytes of non-volatile CMOS RAM Memory – PC66 • Two DIMM 64-bit sockets (64–512 MB) EEPROM • 64-bit memory bus (72-bit with ECC) • 4 Kb serial EEPROM for non-volatile user data • Optional Error Correction Watchdog Flash Drive • Software controlled reset (550 ms) • Internal 1.8-in. IDE Flash Drive • Up to 2 GB supported Temperature Sensor • Extended temperature range and increased shock / vibration • Local temperature SW-readable from -55° C to 125° C, 0.5° immunity increments VGA and LCD NMI Ticker • CT 69030/69000 • User-programmable NMI timer (0.3–18 ms) for real-time ® • 64-bit Windows accelerator and LCD flat panel interface applications • High-speed on-chip 4/2 MB synchronous DRAM (83 MHz) • Flexible 9, 12, 15, 18, or 24-bit panel TFT interface Speaker • Internal speaker (1.0–4.2 KHz) CRT Resolution CT 69030 CT 69000 1024 x 768 16 M @ 100 Hz 64 K@ 100 Hz LED 1280 x 1024 16 M @ 75 Hz 256 @ 75 Hz • Front-panel LED (red), user-programmable 1600 x 1200 64 K @ 60 Hz Mechanical BIOS Features • 3U, three slot wide (100 x 160 x 60 mm) including FlashDrive • AMI BIOS • Two slots on VMEBus • In-system programmable Flash ROM, CPU, memory and • Rear I/O one left side of system slot via I/O transition module IDE auto-detection/selection, integrated VGA, Ethernet and SCSI ROM Temperature • Password protection Highest reachable operating temperature depends on • BIOS POST processor type, speed, ambient conditions (airflow) as shown • System and video BIOS shadowing • Extensive setup with remappable serial/parallel ports below. All values under typical conditions. • Disk, keyboard, and video not required for operation Range Operating Storage Front and Rear I/O (with Transition Module CTM6) Standard 0° C to +70° C –40° C to +85° C The transition module connector pinouts (rear I/O) Extended –40° C to +70° C –40° C to +85° C correspond to standard PC connectors (press fit cables). max Tambient Function Front I/O Rear I/O 70,0 VGA HD-15 10-pin 60,0 Ethernet RJ-45 - Cel566-D1.75V 50,0 Cel733-D1.75V Multi-I/O* - 26-pin mobPIII333-D1.35V 40,0 Keyboard mini-DIN - mobPIII466-D1.35V Mouse mini-DIN - 30,0 USB 1+2 1 USB - 20,0 Reset Switch - 10,0 Speaker On-board - 0,0 LED Red LED - Airspeed m/s 0,00,5 1,01,5 2,02,5 3,03,5 4,0 CAN - - Watchdog - - ® ® NOTE: Mobile Intel Pentium III (333, 466 MHz) require EIDE Primary** - 44-pin, 2.0 mm ® minimum air flow of 0.5 m/s. Also, the Mobile Pentium III COM 1+2 2x D0-9 2x 10-pin processors can run at 70° C. COM 3+4 - 2x 10-pin LPT1 D-25 26-pin Altitude LPT2 - 26-pin • Operating 15,000 ft. (4.5Km) LCD - 40-pin • Storage 40,000 ft. (12Km) SCSI - 50-pin Floppy - 26-pin, 1.25 mm Humidity * Multi-I/O connector includes keyboard, mouse, two USB, reset, • Operating: 5 - 95% @ 40°C watchdog, LED, CAN and speaker. • Storage: 5 - 95% @ 40°C ** Secondary EIDE includes an additional 44-pin connector for 1.8- in. on-board FlashDrive MTBF Calculations are available in accordance with MIL-HDBK-217. Power Requirements Please contact SBS for latest values. • +5 V—required • ±12V—not required Safety All PWBs are manufactured with flammability ratings of 94V–0 Power Consumption by UL recognized manufacturers. Tested with +5V, typical current, 128 MB memory, w/o keyboard, hard disk, modules, etc. CPU Frequency Idle* Operating* Mobile Pentium III 333 MHz 1.6 A 2.2 A Mobile Pentium III 466 MHz 1.7 A 2.4 A Celeron 566 MHz 1.7 A 3.4 A Celeron 733 MHz 1.7 A 3.9 A *Idle—measured at DOS prompt, max. power savings *Operating—measured at DOS prompt, no power savings VC7 Block Diagram Operating Systems Ordering Information ® WIN-NT4xC Windows NT.x ® WIN-2000xC Windows 2000 QNX-11252 QNX4 Hardware Accessories QNX-11294 QNX4, Photon microGUI ® CTM6: I/O Transition Module VXW2-BVW7 VxWorks board support package Tornado 2 CT-IDE IDE Transition Module 2.0 mm -> 2.544 mm (with VMEBus driver) ® CBUS I/O Carrier for Transition Module (male/male) WIN-ENT4xE Windows Embedded NT 4.x SC304F Floppy disk 3.5-in., 19-in. box: 3U/4HP, cable VMEBus Software SC306H10G0 IDE Hard disk 3.5-in., 10 GB, 19-in. box: 3U/6HP, cbl. ® WNT-VME2 VME-DLL and I/O driver for Windows NT YLBSCSI304A Flatcable for external SCSI drive, 60 cm, QNX-VME VMEBus driver for QNX 3U/4HP front panel, 50-pin Centronics conn. VxWORKS See above YLBCOM304A Flatcable for 2x COM, 3U/4HP front panel Chassis CANopen Software ® SCC484TV09VC7— StarterCage: 19", 4U, 84TE card cage, 9x 3U WNT-CAN CANopen master SW for Windows NT ® VME slots; 3x fan, 235W power supply, EMC, 1x CBUS-IO, CD-ROM, VXW-CAN CANopen master SW for VxWorks 3.5" floppy drive, 10 GB hard disk, I/O transition module (CTM6, HD- QNX-CANIO CAN I/O library for QNX ADAP1-A) with frontpanel (YLBCOM304A), 0°C/+50°C Special chassis, supplies, backplanes and drives on request Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Memminger Str. 14 Albuquerque, NM 87110-4316 D-86159 Augsburg, Germany Tel 505.875.0600 Fax 505.875.0400 Tel +49-821-5034-0 Fax +49-821-5034-119 Email info@sbs.com Email aug-info@sbs.com For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2004 SBS Technologies, Inc. 20041025