GE INTELLIGENT PLATFORMS V7812-220001
Specifications
Form Factor
VME
Ethernet Chipset
Intel 82571EB
Video Chipset
ATI M72
BIOS
The V7812 System BIOS and Video BIOS are provided in reprogrammable flash memory.
Dimensions
6U (4HP) double slot Eurocard form factor. Height: 9.2 in. (233.4 mm). Depth: 6.3 in. (160 mm). Thickness: 1.6 in. (40.6 mm).
Ethernet
4x Gigabit Ethernet via two Intel 82571EB. Two ports on the front panel. Two ports on the optional P0 connector for VXS functionality (VITA 41.3).
Processor
Intel Dual- or Quad-Core LV Xeon Processor at 2.13 GHz. 12 Mbyte L2 cache (Quad-Core), 4 Mbyte L2 cache (Dual-Core). 1 GHz system and 667 MHz memory bus.
Intel Xeon
SDRAM
Maximum memory configuration of 4 Gbyte DDR2 SDRAM with ECC via two full size DIMMs.
Features
- 1 GHz system and 667 MHz memory bus
- 2x Gigabit Ethernet on the front panel
- 2x Serial ports
- 4x SAS/SATA
- 6x USB 2.0 ports
- Dual PCI-X PMC expansion sites
- Integrated ATI Radeon E2400 Graphics Processing Unit delivering 2D, 3D, and multimedia graphics performance to embedded systems
- Intel Quad-Core LV Xeon @ 2.13 GHz
- Operating System Support for Windows XP and Linux
- Optional 120 Gbyte SATA hard drive or 8 Gbyte SSD SATA drive
- Optional VXS (VITA 41.3, 1000Mbit/s IEEE 802.3)
- Up to 12 Mbyte L2 cache
- Up to 4 Gbyte DDR2 SDRAM with ECC
Datasheet
Extracted Text
GE Intelligent Platforms V7812 Intel Quad-Core LV Xeon Dual Slot VME Single Board Computer The V7812 is a VXS capable VMEbus single Features Specifications board computer from GE Intelligent Platforms ® ® • Intel Quad-Core LV Xeon @ 2.13 GHz Processor that offers 2.13 GHz of processing speed via • Intel Dual- or Quad-Core LV Xeon Processor at 2.13 GHz • Up to 12 Mbyte L2 cache the Intel Dual- or Quad-Core LV Xeon proces- • 12 Mbyte L2 cache (Quad-Core), 4 Mbyte L2 cache • Up to 4 Gbyte DDR2 SDRAM with ECC sor, up to four Gbyte DDR2 SDRAM, and also (Dual-Core) features a very rich I/O set, making this a very • 1 GHz system and 667 MHz memory bus • 1 GHz system and 667 MHz memory bus flexible addition to our expansive line of VME • Integrated ATI Radeon E2400 Graphics SDRAM SBCs. I/O options include four Gigabit Ethernet Processing Unit delivering 2D, 3D, and • Maximum memory configuration of 4 Gbyte DDR2 interfaces (two via optional VXS), four SAS/SATA SDRAM with ECC via two full size DIMMs multimedia graphics performance to interfaces, six USB 2.0 ports, SVGA on the front embedded systems Storage panel (with DVI-I on the rear), as well as two • Can optionally order with either • Optional 120 Gbyte SATA hard drive or PCI-X capable PMC site. - 8 Gbyte SSD SATA drive or 8 Gbyte SSD SATA drive - 120 Gbyte SATA hard drive • Dual PCI-X PMC expansion sites A unique feature of this SBC is the integration BIOS of the ATI Radeon E2400 Graphics Processing • 2x Gigabit Ethernet on the front panel • The V7812 System BIOS and Video BIOS are provided Unit as the primary video output providing in reprogrammable flash memory. • Optional VXS (VITA 41.3, 1000Mbit/s IEEE 802.3) 2D, 3D, and multimedia graphics perfor- Ethernet • 2x Serial ports mance for embedded systems. Features of • 4x Gigabit Ethernet via two Intel 82571EB • 6x USB 2.0 ports this Graphics Processing Unit include: - Two ports on the front panel - Two ports on the optional P0 connector for VXS • 64-bit interface to 128 Mbyte GDDR3 memory • 4x SAS/SATA functionality (VITA 41.3) • Native PCI Express x16 bus interface with ® • Operating System Support for Windows ® flexibility to operate in x16, x8, x4, x2, and USB Ports XP and Linux x1 modes (x4 mode utilized on V7812) • Six USB 2.0 ports - Four to the front panel • Maximum HDMI Resolution: 1920 x 1080 - Two to rear I/O via P2 (Full HD) • Supported USB features - Isochronous data transfers The V7812 meets the ANSI/VITA 1.5-2003 stan- - Asynchronous messaging dard, based on the Tundra Tsi148. The VMEbus - Self-identification and configuration of peripherals - Dynamic (hot) attachment can run at a bandwidth of up to 320 Mbyte/s along the full length of a 21-slot backplane. Per- VMEbus Backplane Interface formance is increased in the following ways: • The Tundra Tsi148 enables VME320 protocol providing 320 Mbyte/s along the full length of a • 8x faster than the 40 Mbyte/s transfer rate 21-slot backplane. Performance is increased in the of VME64 following ways: • Tsi148 VME-to-PCI/X bridge provides a 4x • 8x faster than the 40 Mbyte/s transfer rate of VME64 increase in useable bus bandwidth over • Tsi148 VME-to-PCI/X bridge provides a 4x increase in existing solutions useable bus bandwidth over existing solutions • Broadcast Mode support for sending data to • Broadcast Mode support for sending data multiple cards at one time to multiple cards at one time ® ® V7812 Intel Quad-Core LV Xeon Dual Slot VME Single Board Computer Serial Ports Block Diagram • Two 16550 compatible serial ports - COM1 routed to front panel via RJ45 connector - COM2 routed to P2 • Ports feature independent 16-byte FIFO supporting Dual- or Quad-Core baud rates up to 115 Kbaud LV Xeon VRD 2.13 GHz core clock; 11.0 1066 MHz FSB PMC Extension Slot 5100 MCH Port 1 (FP) 82571EB • Two 100 MHz PCI-X PMC sites Port 2 (FP) Dual Gigabit PSB I/F • 46-pin P2 user I/O per VITA35, P4V2-46dz Controller x4 PCIe DDR2-667 SDRAM + ECC DDR2 x4 PCIe (VLP DIMM - qty 1) Port A Watchdog Timer SDRAM 2096 Mbytes Port B x4 PCIe Port 1 (P0) Controller A 82571EB Port C • Programmable intervals Port 2 (P0) x4 PCIe Dual Gigabit DDR2 DDR2-667 SDRAM + ECC x4 PCIe Controller • Interrupt and board reset triggers SDRAM (VLP DIMM - qty 1) x4 PCIe Controller B 2096 Mbytes Dimensions VITA 1.5 (P1/P2) PLX Tsi148 DMI I/F 8114 VME • 6U (4HP) double slot Eurocard form factor x4 • Height: 9.2 in. (233.4 mm) ICH9R • Depth: 6.3 in. (160 mm) DMI I/F • Thickness: 1.6 in. (40.6 mm) LEDs (FP) GPIO Power Requirements • +5 VDC ( +5/-2.5 percent), 12.2 A (typical), SATA x2 DMA S-ATA Port 16.8 A (maximum) Controller COM2 Timers • +12 VDC (±5 percent), less than 1 mA W’dog USB x2 • -12 VDC (±5 percent, less than 1 mA USB Port Thermal Probe Note: VME Interface only allows lower voltage of -4.875 Int Cont Controller USB x4 (FP) Note: Does not include PMC site for power requirements RTC EEPROM User Data HD Audio Airflow LPC Bus Super I/O EEPROM • Forced air cooling required SMBus I/F COM1 (FP) LPC Bus I/F SMSC Configuration Data SMBus A (M) 47m10x or equal • 400 LFM minimum, measured at the outlet of BIOS the heatsink Temperature PCI-X • Operating: 0° to +55° C VITA 35 (P2) x4 PCIE 100 MHz PLX PMC 8114 PCI-X • Storage: -40° to +80° C x4 PCIE ATI M72-CSP128 Altitude PMC • Operating: 0 - 10,000 ft (3,000 m) PCI-X x4 PCIE SAS Controller • Storage: 0 - 40,000 ft (12,000 m) VGA (FP) SAS1064E DVI (P2) Humidity SAS x2 (FP) • Operating: relative humidity 5% to 95%, noncondensing • Storage: relative humidity 5% to 95%, noncondensing SATA Hard Drive/SSD Drive MTBF USB USB x2 (P2) • Contact factory COM2 (P2) COM2 (P2) SATA x2 (P2) SATA x2 (P2) Regulatory • The V7812 has been tested and found to meet the requirements of the following standards: - European Union (CE Mark) Ordering Information - United States (FCC Part 15, Class A) - Canada (ICES-003, Class A) V7812-110001: Dual-Core Xeon Processor @ 2.13 GHz, 2 GByte DDR2 SDRAM w/ECC V7812-220001: Quad-Core Xeon Processor @ 2.13 GHz, 4 GByte DDR2 SDRAM w/ECC Rear Transition Modules ACC-0602RC-000: 3-row paddleboard ACC-0603RC-000: 5-row 6U RTM, 2x SATA, one serial port, 2x USB 2.0, one DVI-I port Software V7812-SDK-XP: Windows XP software development kit V7812-SDK-LNX: Linux software development kit GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-1068A Board-to-Board Connector Memory Memory Bus B Bus A PCI-Ex Root Hub Board-to-Board Connector
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the V7812-220001?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods