GE Intelligent Platforms V7769 Intel Core 2 Duo Dual Slot VME Single Board Computer Features Specifications The V7769 is a VMEbus single board computer ® Processor • Intel Core™ 2 Duo processor up to 2.16 GHz from GE Intelligent Platforms, offering up to Intel Core 2 Duo Processor at 2.16 GHz • 2.16 GHz of processing speed via the Intel • Up to 4 MBytes L2 cache • 4 Mbytes cache Core 2 Duo processor with up to 2 Gbyte DR2 • Up to 2 Gbytes DDR2 SDRAM via single • 667 MHz system and memory bus SDRAM. This board Integrates the Intel 45GME SODIMM Express Chipset and offers a very rich I/O set SDRAM • 667 MHz system and memory bus • Maximum memory configuration of up to 2 making this a very flexible addition to our • Up to 8 Gbytes bootable CompactFlash GBytes DDR2 SDRAM via single SODIMM expansive line of Intel Architecture VME SBCs. • Three PCI-X PMC expansion sites I/O options include dual Gigabit Ethernet, two Compact Flash • Optional on-board 2.5-inch SATA hard drive • CompactFlash up to 8 Gbytes accessible through SATA interfaces, four USB 2.0 ports, keyboard/ secondary IDE port mouse/SVGA on the front panel, as well as a • 2x Gigabit Ethernet on the front panel • CompactFlash may be configured as the boot PCI-X capable PMC site. • 2x Serial ports device through the BIOS boot device set-up • 4x USB 2.0 ports BIOS The V7769 provides further customer defined • 2x SATA • The V7769 System BIOS and Video BIOS are I/O capabilities with its dual slot design. By • PS/2 keyboard/mouse on the front panel provided in reprogrammable flash memory. utilizing our patent pending EasyRail™ PMC ® • Operating System Support for Windows , Ethernet mounting system, we are reducing ® ® • Dual Gigabit Ethernet interface via the Intel VxWorks , and Linux configuration time by allowing PMC option 82571 boards to be mounted when access is only Both ports are routed to front panel RJ45 • available from the exposed “top” side. You no connectors longer have to detach your multi-slot carrier • Network boot via PXE assembly to gain access to the PMC mounting USB Ports screws. EasyRail™ allows the module to be • Four USB 2.0 ports: two to rear I/O via P2, and installed completely from the top and two to front panel securely retains the module to the board, • Supported USB features include making installation and maintenance much - isochronous data transfers easier. There are two additional PCI-X PMC - asynchronous messaging expansion sites, a SATA interface for an - self-identification and configuration of additional on-board 2.5" SATA hard drive and peripherals dual SAS to the front panel. - dynamic (hot) attachment VMEbus Backplane Interface Tundra Universe II supporting VME64 modes: • A32/A24/D32/D08(EO)/MBLT64/BLT32 • Hardware byte swapping • Enhanced bus error handling V7769 Intel Core 2 Duo Dual Slot VME Single Board Computer Specifications (continued) Block Diagram Serial Ports • Two 16550 compatible serial ports via DB-9 connectors: COM1 routed to front panel, COM2 routed to P2 • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud PMC Extension Slot • One 133 MHz PCI-X PMC site • Two 100 MHz PCI-X sites • 46-pin P2 user I/O per VITA35, P4V2-46dz • Add 3x 32-bit/33 MHz PMC sites with the PMC237CM1/V SAS Two serial attached SCSI ports to the front panel via • SFF8470 connector Front Panel Options • VME Standard 1101.10 front panel • Programmable Timers • Two 16-bit timers and two 32-bit timers • Mapped in PCI memory space • Completely software programmable and can generate PCI bus interrupts Watchdog Timer • Programmable Intervals • Interrupt and board reset triggers Nonvolatile SRAM • 32 Kbyte of nonvolatile SRAM Dimensions • 6U (4HP) single slot Eurocard form factor Height: 9.2 in. (233.4mm) • • Depth: 6.3 in. (160mm) • Thickness: 0.8 in. (20.3mm) Power Requirements • +5 VDC (±5/-2.5 percent), 6A (typical), 7.6A (maximum) • +12 VDC (±5 percent), less than 1mA • -12 VDC (±5 percent, less than 1mA Note: VME Interface only allows lower voltage of -4.875 Compatible with the ACC-0602RC-100 and ACC-0603RC-100 Rear Transition Modules to provide rear I/O points. Note: Does not include PMC site for power requirements Airflow Forced air cooling required • • 400 LFM minimum, measured at the outlet of the heatsink Temperature Operating: 0 to +55°C • • Storage: -40 to +80°C Altitude • Operating: 0 - 10,000 ft (3,000m) • Storage: 0 - 40,000 ft (12,000m) About GE Intelligent Platforms Humidity GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded • Operating: Relative humidity 5% to 95%, non- computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers condensing a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, • Storage: Relative humidity 5% to 95%, non- government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company condensing headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit MTBF defense.ge-ip.com. • Contact factory GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact. defense.ge-ip.com ©2011 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 02.11 GFA-1046