GE INTELLIGENT PLATFORMS SBC324
Specifications
Form Factor
3U VPX
Audio
High Definition Audio Codec
Stereo line in and stereo line out
Environmental Specifications
Please see datasheet
Ethernet
Dual Gigabit Ethernet interface via Intel’s 82574
Gigabit Ethernet controllers – routed to VPX P1
Fabric Interface
Allows high speed PCI Express connections to other cards in the system, x4 PCIe VPX P1; configurable as Non-Transparent (NTB) for peer-to-peer capability, x4 / x16 PCIe (split across P1/P2), x16 available without XMC, Also GEN 1 x1 PCIe
Flash Memory
Soldered NAND flash array up to 32 GB
General Purpose I/O
Up to 6x GPIO (P1 rear IO), TTL 5V tolerant GPIO each capable of generating an interrupt.
Keyboard and Mouse
1x PS/2 port routed to P1, multiplexed signal with GPIO
LED
1x power
4x BIT status (software control)
NVRAM / RTC / Watchdog / ETI / TPM / BMM
512kB non-volatile RAM (MRAM)
Baseboard Management Controller
Elapsed Time Indicator (record power cycles and on-time)
Real-time clock in CPLD (software programmable)
TPM (Trusted Platform Module)
Watchdog timer (software programmable)
OpenVPX Profile
Module Profile: MOD3-PAY-2F-16.2.7-1
Module Profile: MOD3-PAY-2F2T-16.2.5-3
Power Requirements
+/-12V for XMC/PMC module only
+5V / 3.3V required
Processor
32nm monolithic die processing technology
Intel 2nd Gen. Core i7 Processor, options include but are not limited to, i7-2715QE (Quad core) @ 2.1 GHz (45W), i7-2655LE (Dual core) @, 2.2 GHz (25W), i7-2610UE (Dual core) @, 1.5 GHz (17W) (Actual speed/power depends on environment)
Intel Core i7
Last Level Cache, 6 MB (Quad i7), 4 MB (Dual i7)
SDRAM
Maximum memory configuration of up to 8 GB DDR3 SDRAM @ 1333 MHz soldered with ECC
Serial ATA
2x SATA Revision 3.0 capable (6 Gb/s)
One routed to VPX P1; the other to VPX P2
SATA port on P2 is a multiplexed signal with XMC IO
Serial Ports
Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud
Two 16550 compatible full duplex async serial ports, COM1 routed to VPX P1 RS-232/422, COM2 routed to VPX P2 RS-232/422
Temperature Sensor
Onboard ambient temperature; CPU
USB Ports
2x ports available if GPIO and PS/2 are utilized
Up to 4x USB 2.0 ports routed to VPX P1
Video Controller
1x VGA port routed to VPX P2; multiplexed signal with XMC IO
XMC Expansion Slot
8 differential pairs, plus 12 differential pairs, plus 24 single-end signals
x8 PCIe XMC site (P2 rear IO)
Features
- 1x PS/2 Keyboard and mouse
- 1x VGA
- 1x XMC Site with I/O
- 2nd Generation Intel Core i7 dual and quad core processors
- 2x 10/100/1000BaseT
- 2x RS-232/422 COM ports
- 2x SATA (6 Gb/s)
- 3U OpenVPX Single Board Computer
- 4x USB 2.0
- 512 kB MRAM (non-volatile storage)
- 6x Single-Ended GPIO (5V tolerant)
- BMM (Board Management Microcontroller), ETI, TPM
- Deployed Test Software
- Dual-channel DDR3 (up to 8 GB) @ 1333 MHz
- Five Levels of Ruggedization
- HD Audio
- Multiple PCIe fabric backplane configurations, x16 PCIe GEN 2 option (no XMC), 4x PCIe GEN 2 with NTB capability, also GEN 1 x1 PCIe
- Up to 32 GB NAND Flash
- VITA65 OpenVPX Compatible: MOD3-PAY-2F2T-16.2.5-3, MOD3-PAY-2F-16.2.7-1
- Watchdog, Timers, Sensors
- Windows®, Linux® and Real-Time OS support
Datasheet
Extracted Text
GE Intelligent Platforms SBC324 nd ® 3U VPX 2 Generation Intel Core™ i7 based Single Board Computer Features The SBC324 Rugged Single Board Computer • Advanced Encryption Standard (AES) (SBC) from GE Intelligent Platforms features • 3U OpenVPX Single Board Computer Intelligent performance on-demand with nd • nd the high performance, highly integrated 2 • 2 Generation Intel Core i7 dual and Intel Turbo Boost Technology Generation Core i7 processor platform from quad core processors • Hyper-Thread Technology – Up to 4 Intel. • Dual-channel DDR3 (up to 8 GB) @ 1333 processing cores (2 threads per core) – MHz provides increased performance and 2nd Generation Core i7 with fully integrated • Up to 32 GB NAND Flash processing efficiency graphics and memory controller plus dual • 512 kB MRAM (non-volatile storage) and quad core processing up to 2.5 GHz • Multiple PCIe fabric backplane offers better performance per watt — all in In addition to a comprehensive range of configurations one device. Coupled with the Intel QM67 onboard IO features, the SBC324 also offers an - x16 PCIe GEN 2 option (no XMC) chipset, this provides an unmatched level of on-board XMC mezzanine expansion site for - 4x PCIe GEN 2 with NTB capability, also I/O bandwidth for both on-board and off- enhanced system flexibility. Memory resources GEN 1 x1 PCIe board functions. include up to 8 GB DDR3 SDRAM with ECC, 32 • 1x XMC Site with I/O GB NAND Flash, and optional hard drive via • 2x 10/100/1000BaseT Features of the 2nd Gen Core i7 processor XMC. • HD Audio • Intel® vPro technology: • 2x RS-232/422 COM ports The SBC324 is designed to meet the require- - Intel® VT adds hardware assisted • 1x PS/2 Keyboard and mouse ments of a wide range of applications from performance acceleration • 2x SATA (6 Gb/s) industrial through to fully rugged Defense and - Intel® TXT is a hardware based security • 1x VGA Aerospace programs. It offers extended foundation to build and maintain a • 4x USB 2.0 temperature capability and a range of air and chain of trust, to protect the platform • 6x Single-Ended GPIO (5V tolerant) conduction cooled build levels. from software based attacks • Watchdog, Timers, Sensors • Advanced Vector Extensions (AVX) signal A rich software choice is planned for the • BMM (Board Management processing SBC324, including comprehensive Deployed Microcontroller), ETI, TPM - Intel's AVX doubles the vector register Test Software (BIT and BCS) plus OS support for • VITA65 OpenVPX Compatible size from 128 to 256 bits for up to a 2x Windows 7, Open Linux, VxWorks®, LynxOS® - MOD3-PAY-2F2T-16.2.5-3 FLOP improvement and LynxOS-SE® - MOD3-PAY-2F-16.2.7-1 • Deployed Test Software • Windows®, Linux® and Real-Time OS support • Five Levels of Ruggedization nd SBC324 - 3U VPX 2 Generation Intel Core based Single Board Computer Block Diagram SBC324 XMC SBC324 x16 nd SBC324 - 3U VPX 2 Generation Intel Core based Single Board Computer Specifications XMC Expansion Slot LED Processor nd • Intel 2 Gen. Core i7 Processor, options include • x8 PCIe XMC site (P2 rear IO) • 1x power • 8 differential pairs, plus 12 differential pairs, • 4x BIT status (software control) but are not limited to - i7-2715QE (Quad core) @ 2.1 GHz (45W) plus 24 single-end signals Power Requirements - i7-2655LE (Dual core) @, 2.2 GHz (25W) NVRAM / RTC / Watchdog / ETI / TPM / BMM • +5V / 3.3V required - i7-2610UE (Dual core) @, 1.5 GHz (17W) • 512kB non-volatile RAM (MRAM) • +/-12V for XMC/PMC module only (Actual speed/power depends on • Real-time clock in CPLD (software Temperature Sensor environment) programmable) • Onboard ambient temperature; CPU • Watchdog timer (software programmable) • 32nm monolithic die processing technology • Elapsed Time Indicator (record power cycles • Last Level Cache Note: The SBC324 is designed to provide flexibility and scalability to the user. Use of the XMC I/O affects the availability of other I/O and on-time) - 6 MB (Quad i7) features. Due to the nature of multiplexed signals, I/O • TPM (Trusted Platform Module) - 4 MB (Dual i7) configurations also may be limited. Please contact your GE • Baseboard Management Controller Intelligent Platforms representative for viable configurations. SDRAM • Maximum memory configuration of up to 8 GB DDR3 SDRAM @ 1333 MHz soldered with ECC SBC324-xxxx0xxx SBC324-xxxx1xxx Flash Memory • Soldered NAND flash array up to 32 GB XMC IO 1 - Ethernet x16 PCIe - 1 • Dual Gigabit Ethernet interface via Intel’s 82574 x4 PCIe 2 1 • Gigabit Ethernet controllers – routed to VPX P1 x1 PCIe - 1 USB Ports • Up to 4x USB 2.0 ports routed to VPX P1 COM 2 2 • 2x ports available if GPIO and PS/2 are utilized USB 2 2 Fabric Interface Either / or K / M - 1 • Allows high speed PCI Express connections to other cards in the system GigE 2 1 - x4 PCIe VPX P1; configurable as Non- Audio - 1 Transparent (NTB) for peer-to-peer capability - x4 / x16 PCIe (split across P1/P2), x16 SATA 1 2 available without XMC VGA - 1 - Also GEN 1 x1 PCIe GPIO 6 2 Keyboard and Mouse • 1x PS/2 port routed to P1, multiplexed signal with GPIO OpenVPX Profile Environmental • Module Profile: MOD3-PAY-2F2T-16.2.5-3 • Module Profile: MOD3-PAY-2F-16.2.7-1 Level 1 Level 2 Level 3 Level 4 Level 5 Serial Ports Cooling Method Convection Convection Convection Conduction Conduction • Two 16550 compatible full duplex async serial Conformal Coating Optional Standard Standard Standard Standard ports - COM1 routed to VPX P1 RS-232/422 High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C - COM2 routed to VPX P2 RS-232/422 Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall • Ports feature independent 16-byte FIFO 2 2 2 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g /Hz** supporting baud rates up to 115 Kbaud Serial ATA Shock 20g*** 20g*** 20g*** 40g*** 40g*** • 2x SATA Revision 3.0 capable (6 Gb/s) * With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration • One routed to VPX P1; the other to VPX P2 • SATA port on P2 is a multiplexed signal with XMC IO Audio • High Definition Audio Codec • Stereo line in and stereo line out About GE Intelligent Platforms Video Controller GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded • 1x VGA port routed to VPX P2; multiplexed computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers signal with XMC IO a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, General Purpose I/O government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company • Up to 6x GPIO (P1 rear IO), TTL 5V tolerant GPIO headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit each capable of generating an interrupt. defense.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at defense.ge-ip.com. defense.ge-ip.com ©2011 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 07.11 GFA-1777
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the SBC324?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods