GE Fanuc Embedded Systems QPCI-1553 High-Density PCI Interface GE Fanuc Embedded Systems’ QPCI-1553 pro- Features Multi-function Interfaces vides new levels of performance and flexibility for • 1, 2 or 4 Independent MIL-STD-1553 Dual QPCI-1553 multi-function interfaces are easily MILSTD1553A/B Notice II for PCI backplane form Redundant Channels configured to operate with simultaneous Bus factors. Available in commercial and ruggedized Controller, 31 Remote Terminals and Bus Monitor • Multi-function or Single-function Configurations versions with one, two or four dual-redundant functionality and comes with variable • Test and Simulation Features channels, the QPCI-1553 includes an abstract API voltage transceivers. – On-board Test Bus (Application Programming Interface) software that – UUT transformer connection reduces application development time. Standard Single-function Interfaces – Selective Real-time Playback features include 1 Mbyte of RAM per channel, Single-function QPCI-1553 interfaces have all the – BC & RT error injection/detection 45-bit message time-tagging, triggers, extensive features and functionality of the multi-function – Adv. interrupts and triggers BC & RT link-list structures, error injection/detec- versions, but with only one operational mode – Optional BusTools/1553 Analyzer (optional) tion, automatic/manual RT Status Bit, Mode Code enabled at a time. Each interface can emulate • Bus Controller – BC responses, advanced BC functionality, IRIG-B sig- either a Bus Controller or 31 Remote Terminals or – BC->RT, RT->BC, RT->RT nal Receiver/Generator with GPS synchronization, Bus Monitor with fixed voltage transceivers. on-board Test Bus, UUT transformer connection, – Mode Codes, Broadcast and single-shot messaging 1760 startup time with Busy bit set and hard- Software wired RT address lines. With the highest speed – Programmable time delays Our high-level “abstract” 1553 API is provided encoder/decoder in the industry, the QPCI-1553 in source code, along with integrated support – Major/Minor frames Bus Monitor provides unparalleled error detection for Windows XP, 2000, Me, NT, 98, 95, Linux, – Real-time conditional branching and 100% monitoring of fully loaded buses. LabWindows/CVI, Visual Basic and other operat- – Two aperiodic messaging methods ing systems. To access 1553 functionality without • Remote Terminal – RT software development, BusTools/1553, GE Fanuc – RT data wrapping Embedded Systems’ MIL-STD-1553 bus analysis, – Multiple RT buffers simulation and data logging/monitoring solution – 1760 startup time is available. – Programmable response time – RT Map Monitoring • Bus Monitor – BM – Full error detection – Multiple monitoring methods – 45-bit time-tagging – IRIG-B Receiver/Generator included • Architecture – BC & RT error injection/detection – 1 Mbyte RAM per channel – Transformer & direct coupling – Avionics-level discretes QPCI-1553 High-Density PCI Interface Remote Terminal Specifications Descriptions • Multiple RT simulation (up to 31 RTs) • Programmable error injection (on a per word basis) Physical Bus Controller • Modify data, status words or setup while card is running • PCI card (6.875” x 4.2”) • Programmable control over: • Programmable message content (linked – Major and minor frame content and timing message buffers) Environmental – Intermessage gap times • Interrupts can be generated on a per message basis • Standard operating temp. range: 0 to +55° C – Response time-out and late response upon End of Message and error conditions • Optional extended temp. range available – Multiple BC retry • RT Map Monitoring • Modify messages, data or setup while card is running Software • Insert aperiodic messages into a running BC list Bus Monitor • API – Includes high-level API libraries for Windows XP, • “Oneshot” mode for simplified BC operation • Capture 100% fully loaded bus traffic with: 2000, Me, NT, 98, 95, Linux, LabWindows/CVI • Conditional message sequencing based on real-time – Time-tagging – Error status and Visual Basic message data or status – Word status – Message status • Contact the factory about other OS support • Selectable interrupt generation and status messages – RT response time • GUI – Optional BusTools/1553 GUI bus analyzer – Full range of system conditions • Interrupts can be selected by RT/SA/WC (multi-function boards only) – All detected errors • Extensive filtering and triggering options • LabVEW – Support optional • Full error detection – By individual RT/subaddress – Invalid word – Late response – Transmit, receive or broadcast mode codes Connections – Bit count error – Early response – Internal or external triggering • Transformer or direct coupling – High word – No response – Trigger output on user specified data • Programmable input and output triggers – Low word – Incorrect RT address • Real-time bus playback with RT edit mode • Ten programmable avionics level I/O discretes – Inverted sync – Parity error • 45-bit, microsecond resolution timetagging • UUT transformer stub connection – Manchester • IRIG/GPS synchronization • Hardwired RT Address Line option • Extensive programmable error injection (on a per • IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL) word basis) Multi-function Operational Modes • Synchronize BC operation to external time source • Simultaneous BC, 31 RTs and BM • Variable voltage transceivers Single-function Operational Modes • BC or 31 RTs or BM • Fixed voltage transceivers Power (4 channels, 50% duty cycle) • +5 VDC @ 1695 mA • +3.3 VDC @ 964 mA PCI Signaling Voltage Compatibility • Universal (5V or 3.3V) • Board compatible with PCI-X 1.0 and PCI slots On-board Shared RAM • 1 Mbyte per dual-redundant channel No charge library updates About GE Fanuc Embedded Systems GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 06.07 GFA-939