GE Fanuc Embedded Systems Q104-1553 High Density PC/104-Plus Interface GE Fanuc Embedded Systems’ Q104-1553 Features Multi-function Interfaces provides new levels of performance and flexibility • 1, 2 or 4 Independent MIL-STD-1553 Dual Q104-1553 multi-function interfaces are easily for MIL-STD-1553A/B Notice II in the PC/104 (ISA Redundant Channels configured to operate with simultaneous Bus • Multi-function Features backplane) and PC/104-Plus (PCI backplane) form Controller, 31 Remote Terminals and Bus – Simultaneous Bus Controller, 31 Remote factors. Available in commercial and ruggedized Monitor functionality. Terminals and Bus Monitor versions with one, two or four dual-redundant • Single-function Features channels, the Q104-1553 includes advanced API Single-function Interfaces – Bus Controller or 31 Remote Terminals or (Application Programming Interface) software that Single-function Q104-1553 interfaces have all the Bus Monitor reduces application development time. Standard features and functionality of the multi-function • Bus Controller – BC features include 1 Mbyte of RAM per channel, versions, but only one major operational mode – BC->RT, RT->BC, RT->RT 45-bit message time-tagging, triggers, extensive is enabled at a time. Each interface can inde- – Mode Codes, Broadcast and BC & RT link-list structures, error detection/injec- single-shot messaging pendently emulate either a Bus Controller or 31 – Programmable time delays tion, transformer coupling, automatic/manual RT Remote Terminals or Bus Monitor. – Major/Minor frames Status Bit and Mode Code responses, program- – Real-time conditional branching mable or hardwired RT Address lines (with 1760 Software – Two aperiodic messaging methods startup times and busy bit set), along with Our high-level “abstract” 1553 API is provided • Remote Terminal – RT advanced BC functionality. IRIG-B signal Receiver/ in source code, along with integrated support – 1 to 31 RTs Generator, direct coupled stubs and extended op- for Windows XP, 2000, Me, NT, 98, 95, VxWorks, – RT data wrapping erating temperature range are optional. With the QNX, Linux, Solaris (Q104-1553-P only) and other – Multiple RT buffers highest speed encoder/decoder in the industry, operating systems. To access 1553 functionality – 1760 startup time w/busy bit set the Q104-1553 Bus Monitor provides unparal- without software development, BusTools/1553, – Dynamic Bus Control leled error detection and 100% monitoring of fully GE Fanuc Embedded Systems’ MIL-STD-1553 bus – Automatic Mode Code and loaded buses. Status Bit responses analysis, simulation and data logging/monitoring – Programmable response time – RT solution is available. Map Monitoring – Hardwired RT Address option • Bus Monitor – BM – Full error detection – Multiple monitoring methods – 45-bit time-tagging – Adv. interrupts and triggers • Architecture – BC & RT error injection/detection – BC & RT link list structures – 1 Mbyte RAM per channel • Options – Environmental options – IRIG-B Receiver/Generator – Direct coupled stubs – PC/104 or PC/104-Plus Q104-1553 High Density PC/104-Plus Interface Remote Terminal Specifications Description • Multiple RT simulation (up to 31 RTs) • Programmable error injection (on a per word basis) Physical Bus Controller • Modify data, status words or setup while card is running • Standard PC/104 card size (3.7” x 3.5”) • Programmable control over: • Programmable message content (linked message buffers) – Major and minor frame content and timing • Interrupts can be generated on a per message basis Environmental – Intermessage gap times upon End of Message and error conditions • Commercial operating temp. range: 0 to +70° C – Response time-out and late response • RT Map Monitoring • Optional ruggedized, extended operating temperature – Multiple BC retry range: -40 to +85° C • Modify messages, data or setup while card is running Bus Monitor • Insert aperiodic messages into a running BC list • Capture 100% fully loaded bus traffic with: Software • “Oneshot“ mode for simplified BC operation – Time-tagging – Error status • API – High-level libraries with source code included • Conditional message sequencing based on real-time – Word status – Message status for Windows XP, 2000, Me, NT, 98, 95, VxWorks, QNX, message data or status – RT response time Linux and Solaris (Q104-1553-P only) • Selectable interrupt generation and status messages • Interrupts can be selected by RT / SA / WCCMOS • GUI – Optional BusTools/1553 GUI bus analyzer – Full range of system conditions • Extensive filtering and triggering options (multi-function boards only) – All detected errors – By individual RT/subaddress • Contact the factory about other OS support • Full error detection – Transmit, receive or broadcast mode codes – Invalid word – Late response – Internal or external triggering Connections – Bit count error – Early response – Trigger output on user specified data • Transformer coupling standard – High word – No response • Real-time bus playback with RT edit mode • Input and output triggers – Low word – Incorrect RT address • 45-bit, microsecond resolution timetagging • Ten avionics-level I/O discretes – Inverted sync – Parity error • IRIG/GPS synchronization • Hardwired RT Address Lines – Manchester • 40 pin I/O connector with retaining device • Extensive programmable error injections (on a per Universal PCI Signaling word basis) • PC/104-Plus (5V or 3.3V) Multi-function Operational Modes • Synchronize BC operation to external time source • Simultaneous BC, 31 RTs and BM No cost library card driver upgrades Single-function Operational Modes • BC or 31 RTs or BM Power (at 87% duty cycle) • +5 VDC 1 channel 600 mA 2 channels 990 mA 4 channels 1.63 A Ordering Information On-board Shared RAM Q104-1553-1M: MIL-STD-1553 multi-function, single channel, fixed voltage PC/104 interface • 1 Mbyte (per dual-redundant channel) Q104-1553-2M: MIL-STD-1553 multi-function, two channel, fixed voltage PC/104 interface Options Q104-1553-4M: MIL-STD-1553 multi-function, four channel, fixed voltage PC/104 interface • PC/104 or PC/104-Plus support Q104-1553-1S: MIL-STD-1553 single-function, single channel, fixed voltage PC/104 interface • IRIG-B Rec. (AM or DC/TTL)/Gen. (DC/TTL) Q104-1553-2S: MIL-STD-1553 single-function, two channel, fixed voltage PC/104 interface • Direct coupled stubs -P suffix: PC/104-Plus PCI Bus Configuration • Environmental options -D suffix: Direct coupled stub option -R suffix: Ruggedized, extended operating temperature option -W suffix: IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL) About GE Fanuc Embedded Systems GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 06.07 GFA-941