GE INTELLIGENT PLATFORMS PSL09
Specifications
BIOS
New AMI BIOS Core 8, in-system programmable Flash ROM CPU, memory and IDE auto-detection/selection Integrated VGA, and Ethernet BIOS ROM USB Mass Storage support Password protection, BIOS post Extensive setup Operation without disk and keyboard Remote BIOS through serial port
Cache
Cache Level 1 Level 2 Pentium M (90nm) 32 KB 2 MBytes, full speed Celeron M (90nm) 32 KB 512 KB, full speed
Chipset
400 MHz system bus to processor PCI burst mode transfers up to 512 MB/s (64-bit/66 MHz) One 32-bit wide PCI bus with 33 MHz One 64-bit wide PCI bus with 66 MHz Data throughput between 855GME and 6300ESB is 266 MB/s (theoretical)
Environmental
Note: For detailed information about the operating temperature behavior of the board it is absolutely necessary to consult the manual. The highest achievable operating temperature depends on processor type, speed, altitude, ambient conditions (air flow) or conduction cooling. All values under typical conditions Operating Storage Standard 0 °C to +70 °C –40 °C to +85 °C Extended –40 °C to +70 °C –40 °C to +85 °C Humidity Operating: 5 – 95% @ 40 °C Storage: 5 – 95% @ 40 °C Under non condensing conditions Altitude Operating: 15,000 ft. (4.5 km) Storage: 40,000 ft. (12 km) Shock (3 axis, up & down, 5 hits / direction) Style: 1,3,C,I: 12g / 6 ms Vibration (1 hour each axis) Style 1,3,C,I: 2 g rms @ 5 to 100 Hz
EPROM
1 Mbit (128 kbyte) serial EEPROM
Ethernet
Highly integrated Dual Ethernet Controllers with 32-bit/33 MHz local bus DMA 64 Kbyte Transmit and Receive FIFO 10/100 BaseT auto-negotiation Versions with front I/O (port 1) and/or Pn/Jn4 (port 1 and 2) are available Designed to PICMG 2.15 configuration 7 for port 1 and 2 Link status on board
Flash Memory
Optional integrated Flash up to 512 MB EIDE interface
Keyboard/Mouse
Via USB (supports legacy keyboard/mouse SW)
LPC I/O
One status and one user LED on board Programmable colors each (red, amber, green)
Mechanical
74mm(W) x 149mm(L) For PSL09 specific height dimensions please read the manual
Memory
High-speed 333MHz (PC2700) DDR SDRAM 256 Mbytes with optional ECC
MTBF
Calculations are available in accordance with MIL-HDBK-217.
PCI bus
64-bit PCI to PCI asynchronous bridge Supports Monarch and Non-monarch mode according to VITA32-2003 Release 1.0a 64-bit and 32-bit carrier board support
Power Consumption
typical operating current (estimated) 256 MB memory bank, w/o keyboard, hard disk, modules, etc. Processor 5 V 3.3 V Total Power 1.0 GHz Celeron M 1.2 A 1.5 A 11.0 W 1.4 GHz Pentium M 2.5 A 1.7 A 18.1 W Operating measured at DOS prompt, no power saving
Power Requirements
+5 V, +3.3V Required
Processor
Scaleable processing power with flexible processor design Intel ULV Celeron M processor: 1 GHz Intel LV Pentium M processor: 1.4 GHz High efficiency on-board switching regulator (DC/DC) Fanless cooling with heat sink
RTC
Integrated in chipset RTC 146818 compatible
Safety Criteria
Designed to meet standard UL 60950, CE class A, FCC-A
SATA
Two Serial ATA interfaces at Pn/Jn4 DMA mode up to 150 Mbytes/sec
Serial
One COM port for RS-232 at Pn/Jn4
Technology
CPU die and heat sink temperature software readable from –65 °C to +127 °C
Timer
Integrated in chipset based on 82C59 Includes three timer comparators One-shot and periodic interrupts supported
USB
Four USB 2.0 interfaces Available on the Pn/Jn4
VGA
2D & 3D graphics engine Up to 64MB of dynamic video memory allocation Integrated 350MHz 24-bit RAMDAC for analog VGA monitors up to 1600 x 1200, 85Hz, 16/32-bit Display image rotation Graphics power management VGA at Pn/Jn4
Video
Designed to meet VITA 47 class EAC1 and EAC3
Watchdog Timer
Integrated in chipset Two stage watchdog with independent count values First stage drives NMI or SMI, second stage drives reset Configurable granularity from 1µs to 10min
Features
- 5V / 3.3V supply
- Complies with VITA32-2003 Release 1.0a VITA39-2003
- Custom specific versions
- Four USB 2.0 on Pn/Jn4
- Intel LV Pentium M processor 738 at 1.4GHz and Intel ULV Celeron M processor 373 at 1GHz
- Monarch and Non-monarch mode support
- One RS-232 interface on Pn/Jn4
- Optional –40C to +70C
- Optional conformal coating
- Optional up to 512 MB Flash with EIDE interface
- Optional up to two Fast Ethernet ports front and/or Pn/Jn4
- Optional VGA interface on Pn/Jn4 connector
- PICMG 2.15 R1.0 (config. 7) on request
- Two Serial ATA on Pn/Jn4
- Up to 256 MB DDR SDRAM with optional ECC
- Up to 2MB L2 cache
- Watchdog, temperature sensor
- Windows XP, Linux VxWorks on request
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the PSL09?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods