����������������� �������� ������������������� ���� �������� � Simultaneous Bus Controller, 31 Remote Terminals and Bus Monitor � 1 or 2 independent MIL-STD- 1553 dual-redundant busses (channels) � Easy-to-use BusTools/1553 Windows-based GUI bus analyzer available � Advanced, high-level software API libraries � Multi-function and single- function versions The ISA-1553 provides the highest �������������������������� level of performance and flexibility for � Conditional BC branching on The PCI-1553 can provide one or two MIL-STD-1553A/B on the PC/AT bus real-time message data or single-function 1553 interfaces with all (ISA). The ISA-1553 is integrated with status the features and functionality of the powerful software that reduces multi-function versions, but only one � Aperiodic message insertion development time. All 1553 databus major operational mode is enabled at functionality is supported from our � Real-time bus playback with RT a time – emulating either a Bus advanced API (Application Programming edit mode Controller or 31 Remote Terminals or Interface). Standard features include Bus Monitor. � Flexible I/O triggering real-time bus playback (with ability to edit out RTs), aperiodic message � Extensive error injection/ �������� insertion, error injection/detection, detection Included with the ISA-1553 is Condor’s conditional BC branching, 45-bit � 1 Mbyte shared RAM per easy-to-use flexible, high-level API timetags and “Oneshot” BC operation. channel which supports up to 10 independent Provides host software synchronization 1553 channels. Windows XP, 2000, Me, to pulses from external timing sources � Supports MIL-STD-1553A and B NT, 98, 95, Linux, DOS, LabWindows/ (IRIG, GPS, etc). The Bus Monitor Notice II CVI, Visual Basic and source code mode provides 100% bus monitoring of � Variable output voltage support is provided. LabVIEW support fully loaded 1553 buses. and BusTools/1553, Condor’s GUI bus ������������������������� analysis, simulation and data logging solution for 1553, are optionally One or two multi-function 1553 available. Condor’s high performance interfaces are available on a single and intuitive software solutions provide PC/AT board. They can operate complete and simplified access to simultaneously as a BC, up to 31 RTs MIL-STD-1553 functionality for and as a BM. It can emulate an entire development, integration, test, dual-redundant 1553 channel embedded and maintenance internally, eliminating the need for applications. external hardware to simulate missing nodes. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 �������� ����������������� ������������������� ���� ��������������������� �������������� �������� .������������� ■ ■ 3/4 length ISA card (8.4" x 4.8") Programmable control over: - Major and minor frame content and timing �������������� - Intermessage gap times ■ Operating temperature range: 0°C to +70°C - Response time-out and late response ■ �������� Modify messages, data or setup while card is running ■ Insert aperiodic messages into a running BC list ■ API - Includes high-level API libraries for Windows XP , 2000, ■ “Oneshot“ mode for simplified BC operation Me, NT, 98, 95, DOS, Linux, LabWindows/CVI and ■ Conditional message sequencing based on real-time Visual Basic message data or status - Source code API library provided ■ Selectable interrupt generation and status messages ■ GUI - Optional BusTools/1553 GUI bus analyzer - Full range of system conditions ■ LabVIEW - Support optional - All detected errors ����������� ■ Full error detection ■ - Invalid word - Late response Programmable direct or transformer coupling ■ - Bit count error - Early response Input and output triggers ■ - High word - No response Transition cabling to 1553 cable jacks included - Low word - Incorrect RT address �������������������������������������� !!"� �������#�$ - Inverted sync - Parity error ■ Simultaneous BC, 31 RTs and BM - Manchester ■ Extensive programmable error injections (on a per ���%����������������������������������� !!"� �������#�$ word basis) ■ BC or 31 RTs or BM ■ Synchronize BC operation to external time source ���&������������’(� ’������/������� ■ 1 Mbyte per channel ■ Multiple RT simulation (up to 31 RTs) �������������������)�!*+�����������$ ■ Programmable error injection (on a per word basis) ■ ■ Modify data, status words or setup while card is running +5 VDC: 1.5 A ■ ■ Programmable message content (linked message buffers) +12 VDC: 226 mA ■ ■ Interrupts can be generated on a per message basis upon -12 VDC: 50 mA End of Message and error conditions ,�������-�3 year limited hardware warranty .���������� ��������� � �������������� ■ Capture 100% fully loaded bus traffic with: ���������� MIL-STD-1553 multi-function, single - Time-tagging - Error status channel PC/AT interface board - Word status - Message status ����������� MIL-STD-1553 multi-function, two channel - RT response time PC/AT interface board ■ Interrupts can be selected by RT / SA / WC ���������� MIL-STD-1553 single-function, single ■ Extensive filtering and triggering options channel PC/AT interface board - By individual RT/subaddress ����������� MIL-STD-1553 single-function, two - Transmit, receive or broadcast mode codes channel PC/AT interface board - Internal or external triggering ����������������� - Trigger output on user specified data ������������� MIL-STD-1553 Bus Analysis, Simulation & ■ Real-time bus playback with RT edit mode Data Logging software for Windows ■ 45-bit, microsecond resolution timetagging (multi-function boards only) ■ Host software synchronization to external timing sources ������� LabVIEW support for MIL-STD-1553 A channel is a dual-redundant A/B pair. See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. ISA-1553 4/06 Tel 805.965.8000 Fax 805.963.9630