GE Intelligent Platforms Industry First: 8 Channel MIL-STD-1553 PMC Module EPMC-1553 High Density PMC Module Features GE Intelligent Platforms EPMC-1553 is the first Multi-function Interfaces PMC (PCI Mezzanine Card) module to offer up • 1, 2, 4 or 8 Independent MIL-STD-1553 All EPMC-1553 interfaces provide simultane- to 8 dual redundant MIL-STD-1553B Notice Notice II Dual Redundant Channels ous Bus Controller, Remote Terminal(s) and II channels. Available in commercial, rugge- Bus Monitoring functionality. • All configurations are multi-function with dized and conductively cooled versions with simultaneous Bus Controller, Remote one, two, four or eight dual-redundant chan- Single or 31 Remote Terminal Support Terminal(s) and Bus Monitor nels, the EPMC-1553 includes advanced API Configuration options for either single (-T) or • Configuration options - either single (Application Programming Interface) software 31 (-M) RTs are available. RT or 31 RT that reduces application development time. • CORE-API provided in source code with Software support for Windows and VxWorks Standard features include: The EPMC-1553 is provided with our advanced • Transformer coupling • Front panel or rear (P14) I/O options CORE-API software in easily portable source • 128 Kbytes of RAM per channel • Optional IRIG-B receiver/generator code, along with support for Windows XP, • 45-bit message time-tagging 2000, NT and VxWorks. Contact factory for • 45-bit, microsecond time-tagging • Triggers Linux or Integrity O/S support. • Complete message programmability • 8 bi-directional avionics-level discretes • 8 bi-directional RS-485 differential discretes • Hardwired RT addressing Tools for MIL-STD-1553 bus analysis, simu- • Support for 66 or 33 MHz PCI and PCI-X • Utilizes GE Intelligent Platforms lation, and data logging/monitoring are bus operation RT Validated CORE-1553 protocol engine available separately with the QPCI-1553 card • Automatic/manual RT Status Bit and Mode with BusTools GUI. • Flexible message status/interrupt generation Code responses • I/O triggering • Programmable or hardwired RT address The EPMC card does not support BusTools GUI. lines (with 1760 startup time and busy bit • Transition cabling to 1553 cable jacks set) along with advanced BC functionality. included with front panel versions • Commercial, ruggedized, extended An optional IRIG-B signal Receiver/Generator temperature or conductively cooled with GPS synchronization and multiple con- configurations available figuration options is available. EPMC-1553 High Density PMC Module Remote Terminal Specifications Description • Available with support for either single or 31 RTs Physical Bus Controller • Utilizes RT Validated CORE-1553 IP • PMC Mezzanine Card (74 mm x 149 mm without bezel) • Programmable control over • Modify data, status words or setup while card - Major and minor frame content and timing • Standard configuration has front panel I/O is running - Intermessage gap times Environmental • Programmable message content (linked message - Response time-out and late response • Standard operating temperature range: 0°C to +55°C buffers) - Multiple BC retry • Interrupts can be generated on a per message basis • Relative humidity: 5 to 90% (non-condensing) • Modify messages, data or setup while card is running upon End of Message and error conditions • Optional ruggedized, extended temp and conduc- • Insert aperiodic messages into a running BC list tively cooled configurations Bus Monitor • “Oneshot“ mode for simplified BC operation Software Support • Capture bus traffic with: • Selectable interrupt generation and status messages - Time-tagging • CORE-API library in source code provided with - Full range of system conditions - Error status support for Windows XP, 2000, NT, VxWorks and - All detected errors - Word status Linux. Contact factory for Integrity O/S support. • Error detection - Message status - Bit count error Connections - RT response time - Inverted sync • Transformer coupling only • 45-bit, microsecond resolution time-tagging - High word • I/O triggers - Incorrect RT address • 8 bi-directional avionics-level and 8 bi-directional - Low word RS-485 differential discretes - Parity error • Front panel (SCSI-III) or optional P14 I/O connections • Transition cabling to 1553 cable jacks included on front panel configurations Ordering Information EPMC-1553-1M Operational Modes MIL-STD-1553 multi-RT-multi-function, single dual-redundant channel, front I/O PMC interface • All configurations provide simultaneous BC, RT and BM • Available in single RT (-T) or 31 RT (-M) configurations EPMC-1553-2M MIL-STD-1553 multi-RT-multi-function, two dual-redundant channel, front I/O PMC interface Power (8 channels at 75% duty cycle) • +5 VDC @ 2.8 A (typ.) EPMC-1553-4M MIL-STD-1553 multi-RT-multi-function, four dual-redundant channel, front I/O PMC interface • 10 W power dissipated on board EPMC-1553-8M On-board Shared RAM MIL-STD-1553 multi-RT-multi-function, eight dual-redundant channel, front I/O PMC interface • 128 Kbyte (per dual-redundant channel) EPMC-1553-1T PCI Signal Compatibility MIL-STD-1553 single-RT, multi-function, single dual-redundant channel, front I/O PMC interface • Universal (5V or 3.3V) EPMC-1553-2T • Supports 66 or 33 MHz PCI bus operation MIL-STD-1553 single-RT, multi-function, two dual-redundant channel, front I/O PMC interface • PCI-X compatible EPMC-1553-4T Configuration Options MIL-STD-1553 single-RT, multi-function, four dual-redundant channel, front I/O PMC interface • 1, 2, 4 or 8 dual-redundant channels EPMC-1553-8T • Front or P14 I/O MIL-STD-1553 single-RT, multi-function, eight dual-redundant channel, front I/O PMC interface • Ruggedized - All components rated to -40°C to +85°C or better Contact Factory for Conduction Cooled, Rugged and Other Configurations - Up to +60°C in free air @ 75% duty cycle, all 8 channels - Up to +70°C with 100 ft/min air @ 75% duty cycle, all 8 channels • Ruggedized, VITA compliant conductive cooling -40°C to +71°C rail temp @75% duty cycle, all 8 channels • Conformal coating • IRIG-B Receiver (AM or DC/TTL) and Generator (DC/TTL) About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-751A