GE Intelligent Platforms EC12 6U CompactPCI Celeron Single Board Computer • 6/6 RoHS and WEEE directives compliant; Applications with the need for higher Features UL, FCC, and CE Mark registrations shock & vibration immunity benefit due • Celeron 1.86 MHz processor with 2MB ® to soldered memory and optional use of • IPMI 2.0 PICMG 2.9 cache and 1066 MHz integrated memory a Solid-State-Disk. interface • Watchdog, temperature sensors • Single slot 6U CPCI form factor ® • OS support: Windows, standard distri- The EC12 is equipped with IPMI 2.0 functional- ® • 2 Gbytes DDR3 SDRAM with ECC bution Linux and VxWorks. ity. Supported operating systems include ® ® Windows, Linux and VxWorks. (soldered components) • Customization on request ® • PICMG compliant The upper limit of the temperature range ® • BIOS backup Flash The EC12 is a single slot 6U CompactPCI depends on the optional population with a SBC with Celeron 1.86 MHz processor with • User EEPROM PMC, XMC mezzanine or a SATA hard drive. 2MB cache and a 1066 MHz integrated • Optional onboard SATA HDD or Solid memory interface. The assembly is fully The EC12 is designed for use in a broad State disk ® compliant to the PICMG specifications. range of applications such as telecom / • One PMC or XMC site communications, industrial control and • Front I/O: Two banks of DDR3 SDRAM components automation, test,and measurement sys- provide 2 GBytes of main memory with ECC. - Two Gigabit Ethernet ports tems. This, combined with a customer specific assembly service, provides opti- - One USB The BIOS Flash is backed with a second mized price and performance levels. - One COM 3 Flash device in order to recover the BIOS in the event the primary BIOS is corrupted. - Optional via PMC or XMC Please contact GE Intelligent Platforms for • Rear I/O: a current list of OS versions supported on One high performance PMC or XMC slot the EC12. - Two Gigabit Ethernet ports – PICMG 2.16 gives the user the freedom to expand the - VGA 1 & 2 functionality through off-the-shelf mezza- nine modules. - DVI 1 and 2 - Four SATA (3 Gb/s) interfaces - COM 1 and 2 ports - Four USB ports - GPIOs - PMC/XMC I/O signals EC12 6U CompactPCI Celeron Single Board Computer SATA BIOS Features EC12 Safety and Reliability Benefits • Four SATA (3 Gb/s) ports to rear I/O • New AMI Aptio UEFI, in-system programmable Flash ROM • CPU, memory and SATA auto-detection/selection Serial I/O Soldered processor and memory • Integrated Ethernet PXE driver • Three asynchronous 16550 compatible full duplex Increased immunity against shock and vibration • USB mass storage support and booting capability serial channels (floppy, HDD, CDROM, and onboard Flash ROM array) BIOS Backup Flash • High-speed transfer up to 115.2 kbaud with 16 • Password protection Fast recovery when BIOS upgrade got corrupted byte FIFOs • Headless operation Controlled via IPMI controller • Two user selectable RS-232/422/485 interfaces at rear ® Update via factory only • COM3 RS-232 available at front via HarLink IPMI 2.0 connector • Baseboard Management Controller supporting the Intelligent Platform Management Interface (IPMI) Video/Graphics Interface Specifications ® architecture in compliance with PICMG 2.9 • Intel integrated 3D graphics controller • Peripheral mode and BMC mode are supported Processor • Two VGA port plus two DVI-D ports at rear I/O • IPMI is an optional function • Celeron P4505, 1.86 GHz • Any two ports can be used for dual display operation • Cache: 2 MB, full speed, 2x (64K + 512K) ™ • Fully compliant support for OpenGL for Linux Software • 1066MHz integrated memory interface • Windows XP General Purpose I/O • Fanless cooling with heat sink • Windows 7 • 13 GPIO (input or output) pins • Two PCI Express x8 ports • Linux • Software configurable • FDI and DMI interface to I/O Controller hub • VxWorks 6.8 • Hardware Write Protection of programmable CompactPCI devices • PICMG 2.0 R3.0 compliant CPCI local bus standard USB Ports Front and Rear I/O (Transition Module CTM20) • 64-bit PCI for up to 8 slots (33 MHz) or 5 slots (66 MHz) • One USB 2.0 connector on the front • Supports both system Host and Peripheral Mode in • Four USB 2.0 channels on rear a single assembly Function Front Rear • 2 mm pin and socket connectors (IEC-1076-4-101) Keyboard and Mouse VGA 1 • • Via USB I/O Controller Hub • Legacy PS/2 controller emulation • FDI and DMI interface to processor VGA 2 • • Supplies I/O interfaces/functions to front & rear Real-time Clock • 8 PCI Express ports • RTC 146818 compatible DVI 1 & 2 • • Choice of four display channels • Li-battery Main Memory Array COM 1 & 2 • EEPROM • Dual channel DDR3 SDRAM array: 2 banks soldered • 512 kbit serial EEPROMs for non-volatile user data memory components COM 3 • • 144-bit wide with error correction (ECC) Timer • 2 GBytes • Integrated in Hub controller USB 0 – 3 • • Legacy PC-AT timer Front Dual Gigabit Ethernet • HPET High Precision Event Timer USB 4 • ® • Twin Intel 82574L PCI Express Ethernet controllers • 10/100/1000BaseT auto-negotiation Watchdog Ethernet 1,2 • • Integrated in Super I/O Rear Dual Gigabit Ethernet ® Ethernet 3,4 • • Twin Intel 82574L PCI Express Ethernet controllers Temperature Sensors • 10/100/1000BaseT auto-negotiation • CPU die and chipset die temperature software ® SATA 2-5 readable in the range of –15°C to +105°C • • Compliant to PICMG 2.16 LED Onboard Hard Disk or SSD Drive GPIO • • Optional internal 2.5” SATA hard disk or 2.5” SATA • Front panel ACPI system Status indicator LED (red/ amber/green) Solid State Drive (SSD) LEDs • • • CompactPCI Hot swap (blue) on front panel • Usage of SSD is recommended for high shock and vibration immunity PMC / XMC I/O • • Hot-Swap - compliant to PICMG 2.1 • Peripheral mode: full CompactPCI Hot Swap PMC/XMC Extension Slot Power Button • • • PMC (64-bit PCI, up to 133 in PCI-X mode) or XMC with • System Host mode: CompactPCI ENUM# event PCI Express x8 (Gen2, 2.5 Gbit/s) support through ACPI or legacy driver • PCI signaling is 3.3V, 5V tolerance EC12 6U CompactPCI Celeron Single Board Computer Block Diagram Specifications Power Requirements • +5 V, +3.3V, +12V • -12V if required by mounted PMC/XMC module Power Allowances – PMC/XMC Slot • +5 V, +3.3 V: Total power max. 7.5 W • ±12 V: 100mA Power Consumption - typical operating current • See manual. Environmental • Operating Temperature*: 0° C to +60° C @ 1.5m/s airflow • Storage Temperature: -40° C to +85° C • Humidity: 5 - 95% @ 40° C • Altitude: - Operating:15.000 ft. (4.5 km) - Storage 40.000 ft. (12 km) • Shock & Vibration: - Designed to meet VITA47 class EAC1 and EAC3 Mechanical – PICMG 2.0 • 6U, 1 slot wide, 233 mm x 160 mm x 20 mm with hard disk MTBF • Prediction calculations are available in accordance with MIL-HDBK-217. Please contact GE Intelligent Ordering Information Platforms. Safety EC12EUD200MA 6U CPCI SBC with Intel Celeron M 440 (1.86 GHz), 2 GB memory with ECC, 1x COM (front), 1x • Designed to meet standard UL1950, USB (front), 2x COM (rear), 4x USB (rear), 2x VGA & 2x DVI on rear, 2x GbE (rear), 2x GbE (front), CE class A, FCC-A 1x PMC/XMC slot, 250 GB SATA HDD, 0 to 55 °C YLB-CR12-01 Front I/O COM port cable appr. 200 mm. Harlink connector to serial connector DMS59A DMS-59 compliant Y-cable with two DVI connections for the RTM CTM20 *Note: Consult the User’s Manual or GE Intelligent Platforms for additional detailed information on the CTM20A00A 6U I/O RTM with USB 2/3, onboard SATA HDD connector operating temperature behavior of the module. The CTM20A0MA 6U I/O RTM with USB 2/3, onboard SATA HDD connector and 250 GB HDD EC12 operating temperature range is influenced by CTM20A10A 6U I/O RTM with USB 2/3, COM1, VGA, eSATA3, onboard SATA HDD connector processor type and speed, operating altitude, and the type of cooling used in the host system. CTM20A20A 6U I/O RTM with USB 2/3, COM1, VGA, eSATA2/3, onboard SATA HDD connector EC12-BSP-VXW VxWorks 6.8 Board Support Package All values under typical conditions without EC12-SDK-LIN System Development Kit for Linux (Fedora 14, RHEL 5.46 & 6.0, Suse 11.4) PMC/XMC module. EC12-SDK-WIN System Development Kit for Windows XP and Windows 7 For additional configurations, please contact GE Intelligent Platforms. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2011 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 06.11 GFA-1820