GE Intelligent Platforms DSP230 Quad Freescale MPC864xx Multi Fabric 6U VPX Multiprocessor DSP230 sets the standard for COTS multi- RuntimeView shows an AXIS Quick Start Features processors aimed at rugged defense and example application to assist with algorithm • Four Freescale 8640D SoC nodes aerospace applications such as deployed development and system characterization. • Eight banks DDR2 SDRAM radar, sonar, signal intelligence and • Eight port Serial RapidIO switch image processing. System integrators can benchmark their application to scope performance, size, • Forty-eight lane gen_2 PCIe switch Available in air, spray and conduction weight and power (SwaP) requirements for • One PMC-X / XMC (VITA 42.3) site cooled builds, the DSP230 quad 8640D 6U the deployed platform. • Gigabit Ethernet switch with VLAN VPX multiprocessor supports concurrent, • Central communications resource FPGA any node to any node, data over PCIe, Serial RapidIO and Gigabit Ethernet via onboard • Eight serial ports switched fabrics. The onboard gen_2 PCIe • Rugged 6U VITA 46 & VITA 48/REDI builds switch supports high speed data to all four Software 8640D nodes, the PMC/XMC and optional • AXIS Advanced Multiprocessor P2 connector. Two additional ports to the Integrated Software system back plane can be enabled via the XMCPN526 expansion board. • Built-In-Test (BIT) for PowerPC® • BSPs for LynxOS® 5.0 & VxWorks® 6.6 DSP230 is designed for use with our GE • Linux Software Development Kit SBC610 MPC864xx single board computer, PEX44x dual slot PMC/XMC carriers and XMCV5, Xilinx Virtex-5 mezzanine copro- cessor providing maximum flexibility to system architects. AXISLib VSIPL and RSPL optimized DSP, AXIS Advanced Multiprocessor Integrated math and function libraries provide a Software provides a suite of fully integrated wide range of optimized functions for the modules for system development, visual- PowerPC e600 / AltiVec platform. ization and deployment including example applications such as a distributed corner AXISFlow supports high through put, low turn and stress tests providing a quick latency, interprocessor communication start for application development and (IPC) across all system nodes to maximize system evaluation. system performance, and increase flex- ibility in the design of the most demanding signal and data processing applications. DSP230 Quad Freescale MPC864xx Multi Fabric 6U VPX Multiprocessor Specifications Block Diagram Form Factor • 6U VITA 46 or VITA 48/REDI GbE/Serial Processors SDRAM SDRAM • Four MPC8640D dual core processors PMC/XMC • Single core mode is also supported Processor Processor Memory SDRAM SDRAM PCIe/ • Eight banks DDR2 SDRAM PCI-X - 512 MBytes per bank (standard) • Two banks of 256 MBytes FLASH Flash Multi Fabric Architecture Switch • Serial RapidIO switch - Four x4 ports to P1 Flash - One x4 port to each 864xx - Up to 3.125 GHz operation per lane - Full featured sRIO driver with dynamic device discovery, and enumeration, broadcast and SDRAM SDRAM multi-cast support Processor Processor • PCIe switch - One x8 port to each 8640D node SDRAM SDRAM - One x8 port to XMC site - One x4 port bridged to PCI-X PMC - One x4 port to optional P2 connector • Gigabit Ethernet Switch - Two ports to each 864xx - One or two ports to backplane PCIe - One port to Front Panel (air cooled builds only) Serial, GbE XMC I/O GbE, XMC XMC I/O sRIO & Power & P2 & XMC I/O & GPIO AXIS Utility Central Communication Resource FPGA Optional P6 P5 P4 P3 P1 P0 • Inter-node and inter-board - Time stamp, synchronization - Mail boxes, semaphores Serial Ordering Information • 8 ports to P2 connector - Four RS232 to front panel (air cooled builds only) DSP230-1 0 4 4 4 3 = standard build - Four RS232 or RS422 3 = 1” pitch VITA46 2 = 0.85” pitch VITA46 Ruggedization B = 0.85” pitch VITA46/REDI with 2LM covers • Build levels 1 to 6 4 = BIT & VxWorks Boot ROM • Optional VITA 48/REDI 2LM build 5 = BIT & U -BOOT 4 = 8x 512 MBytes DDR2 SDRAM Software ® 4 = 8640D @ 1 GHz • BIT for PowerPC 5 = 8641D @ 1 GHz • BSPs for LynxOS 5.0 & VxWorks 6.x with advanced 0 = no P2 connector sRIO driver support 1 = P2 connector fitted • AXIS Advanced Multiprocessor Integrated Software Air cooled 1, 2, & 3 • Linux Software Development Kit Conduction cooled 4 & 5 • AXIS Quick Start Example Applications AXIS Multicomputer About GE Intelligent Platforms Open Architecture, COTS Multiprocessor Solutions GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance Customer Application technology company and a global provider of hardware, software, services, and expertise in automa- AXIS Advanced Multiprocessor Integrated Software tion and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable Universal Interface Layer (UIL) technology that provides customers a sustainable advantage in the industries they serve, including Board Support Package (BSP) energy, water, consumer packaged goods, government and defense, and telecommunications. GE Built-in-Test (Configurable POST) Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE I/O, SBCs, Multiprocessors, Fabric Switches Enterprise Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100. Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact. www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. 01.10 GFA-1012 Specifications are subject to change without notice. FPGA GbE PCIe sRIO I2C