GE INTELLIGENT PLATFORMS CV123000C
Specifications
Environmental
Temperature Tests performed with 7.5W PMC load Range Operating Storage Standard (C) 0°C to +70°C –40°C to +85°C Extended (N) –40°C to +85°C –55°C to +105°C Humidity Operating Storage 5 - 95% @ 40°C 5 - 95% @ 40°C Altitude Operating Storage 15.000 ft. (4.5 km) 40.000 ft. (12 km) Shock C-Style 12g /6 ms, 3-axes, up & down, 5 hits/direction N-Style 40g /11 ms, 3-axes, up & down, 5 hits /direction 100g / 6 ms, 3-axes, up & down, 5 hits / direction Vibration C-Style 2 g rms @ 5–100 Hz, 60 minutes each axis N-Style 12 g rms @ 5–2000 Hz, 60 minutes each axis
Flash Storage
128 MB flash memory Multiple levels of write-protection
GPIO
Two 10/100/1000 Base-TX Ethernet ports to backplane Two on-board Gigabit Ethernet PHYs MAC/RGMII interface from MV64460 System Controller
Graphic Processor
10 programmable GPIO ports (eight dedicated, two shared) Programmable for line direction (input, output), input polarity (inverted, non-inverted), output type (TTL, open-drain), and interrupt masking Independent interrupts for each port
Mechanical
PICMG 2.0 and VITA 30.1 compliant 3U, 1 slot wide 100 mm x 160 mm Weight: C-Style: 15.2 oz. N-Style: 9.6 oz.
MTBF
Calculations are available in accordance with MILHDBK-217.
Networking
32 kB non-volatile RAM STK17T88 NVRAM device Real-time clock feature Backup power (+3.3V supplied from the system)
PCI bus
Two PCI Bus interfaces from MV64460 System Controller PCI Bus 0: 32-bit 33/66 MHz, +3.3 VIO, dedicated to PMC site PCI Bus 1: 32-bit 33/66 MHz, dedicated to cPCI bridge
PMC #1
Single IEEE P1386/1386.1-2001-compatible PMC site on dedicated PCI bus Rear I/O support (+3.3V VIO)
Power Connector
PMC power max.: 7.5 W +5V, +3.3V, ±12V
Power Consumption
Total (processor at 1 GHz, 256 MB SDRAM): 40 W. This value is a calculated maximum. Inrush: TBD BATT+ for RTC battery backup: 10µA
Power Requirements
+5 V, +3.3V—required ±12V—only if required by installed PMC module +3.3V—required for RTC battery backup
Processor
Freescale MPC7447A PowerPC G4 processor Core processor speed: 1 GHz High performance, 32-bit PowerPC RISC architecture Superscalar processor 32 kB L1 instruction and data caches 512 kB L2 on-chip cache 64-bit 167 MHz System Bus from MV64460 System Controller
Safety Criteria
Designed to meet standard UL1950/60950 Designed to meet FCC Part 15, Subpart A
SDRAM
256 MB of soldered DDR333 SDRAM (PC2700) Memory Controller from MV64460 System Controller 64-bit 167 MHz Memory Bus (72-bit with ECC)
Serial
Two Multi-Protocol Serial Controller (MPSC) ports from MV64460 System Controller COM1: RS-232 (asynchronous) COM2: RS-422/485 (synchronous and asynchronous)
Technology
CPU die and ambient temperature Software readable from –55°C to +125°C
Watchdog Timer
MV64460 System Controller
Features
- 10 GPIO ports (eight dedicated, two shared)
- 32 KB NVRAM
- Conduction or convection cooled
- DDR SDRAM: 256 MB with ECC
- Freescale™ MPC7447A G4 host processor with 512 KB on-chip L2 cache
- Marvell® MV64460 PowerPC® System Controller (Discovery® III) bridge chip
- PMC extension slot, 32-bit 33/66 MHz with rear I/O
- Real-time clock with backup power from system
- RS-232 (COM1) serial port
- RS-422/485 (COM2) serial port
- Single slot
- Soldered boot flash: 128 MB with multiple levels of write-protection
- System controller or peripheral mode operation
- Temperature sensor
- Two 10/100/1000 Base-TX ports to backplane
- Watchdog timer
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the CV123000C?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods