GE Intelligent Platforms CT11 ® Single Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Features The CT11 is a 6U CompactPCI CPU board The CT11 provides a unique feature set, includ- ® ™ with integrated dual core Intel Core2 Duo ing up to 4 GByte of DDR2 SDRAM (200 MHz) • Intel Core 2 Duo processor 1.5 GHz and or Intel Core Duo Processor and dual Giga- with enhanced ECC, four independent on- 2.16 GHz bit Ethernet PICMG 2.16 channels. The Intel board PCI buses, system host and peripheral ® ™ • Intel Core Duo processor 1.66 GHz and dual core processor includes two optimized mode support for the CPCI backplane, two 2.0 GHz execution cores in a single processor case. PMC interfaces (64-bit/133 MHz and 32-bit/33 • PICMG 2.1 (Hot Swap ) compliant This enables execution of parallel threads MHz). A high level of functional integration (two • System and non-system functionality or applications on separate cores with dedi- Gigabit Ethernet, one Fast Ethernet, two serial cated CPU resources. The CT11 supports a interfaces (RS-232 or RS-422/485), USB 2.0, • Up to 4 GByte DDR2 SDRAM (200 MHz) 32- and 64-bit processor architecture. CT11 integrated HDD or Flash drive) within a single with ECC is designed to meet the requirements of mar- slot gives users the freedom to use the PMC • Flash drive or local UDMA100 2.5” hard disk kets such as telecom, simulation/training, test interfaces for their application specific I/O. • 2x SATA, RAID 0/1 capable and measurement, military and aerospace. The VGA/DVI interface is supported through a ® • Front/rear VGA up to 1280x1024, rear DVI-I high performance 2D/3D ATI video control- Based on the Intel Core Duo Processor, the up to 1280x1024, 32 MByte RAM ler capable of driving two displays in parallel. platform is designed to support processor For telecom applications the CT11 is equipped • Two Gigabit Ethernet ports speeds from 1.06 GHz up to 2.0 GHz. The Intel with IPMI 1.5 functionality. 10/100/1000BaseT front or rear optional Core2 Duo runs at 1.5 GHz and 2.16 GHz. • PICMG 2.16 compliant Rugged needs are addressed with optional Versions with front panel I/O are available • One front Fast Ethernet port extended temperature range of up to -40 °C in various configurations with one or two • Two PMC extension slots, one 64-bit/ to +75 °C (depends on selected board options) PMC interfaces. 133 MHz and one 32-bit/33 MHz and conformal coating. ® Supported operating systems are Windows, • 2x serial I/O with FIFOs ® ® Linux and VxWorks . RS-232/422/485 interface • 4x USB 2.0 ports, two front and two on rear • Audio codec • Optional IPMI 1.5, PICMG 2.9 • Watchdog, temperature sensors • Optional –40 °C to +75 °C • Conformal coating on request • Customer specific, low cost assembly versions • RoHS compliant ® CT11 Single Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor ® ™ VGA and DVI – ATI X300 Hot Swap - compliant to PICMG 2.1 Specifications • 256-bit 3D and 2D graphics accelerator • Peripheral mode: Full CompactPCI Hot Swap Processor - µFCBGA, Low Power Design • On-chip 32 MByte memory • System Host mode: CompactPCI ENUM# event • Scalable processing power with flexible supported through ACPI or legacy driver • PCI Express x4 interface processor design • Dual CRT/Simultaneous Dual Display (same or BIOS Features • Supports 32-bit and 64-bit processor architecture different surfaces) • AMI BIOS Core 8, in-system programmable Flash ROM • 64-bit: Intel Core2 Duo processor:1.50 GHz and • Integrated 300 MHz Palette DAC for analog VGA • Automatic system configuration 2.16 GHz monitors up to 1280 x 1024 • Integrated VGA, SATA RAID and Ethernet PXE ROM ® • 32-bit: Intel Core Duo processor: 1.66 GHz and 2 GHz • Single channel DVI-I interface PanelLink for TFT • USB mass storage support • High efficiency on-board switching regulator (DC/ displays up to 1280 x 1024 true color (EDID displays • Password protection DC) PnP supported) • Headless support • Fanless cooling with heat sink • Fully compliant support for OpenGL for all Windows • Remote console through serial port * Contact factory for latest CPU versions operating systems and Linux • Versions with front or rear I/O Processor FSB MHz Level 2 Cache IPMI 1.5 Core 2 Duo 667 4 MB • Baseboard management controller supporting the EIDE – 6300ESB Intelligent Platform Management Interface (IPMI) Core Duo 667 2 MB • Ultra ATA/100 sync. DMA mode up to 100 MByte/s architecture in compliance with PICMG 2.9 • PIO mode 4 and bus master IDE up to 16 MByte/s CompactPCI – PLX 6466 PCI-to-PCI Bridge • Peripheral mode and BMC mode are supported • One device via on board connector and two devices • PICMG 2.0 R3.0 compliant CPCI local bus standard • IPMI is an optional function via rear I/O • 64-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) Software or 5 slots (66 MHz) General Purpose I/O • The following software is supported to the extent • Supports System Host and Peripheral Mode • 8 GPIO (input or output) pins listed below. • J1+2, 2 mm pin and socket connectors • Software configurable (IEC-1076-4-101) OS On Request Planned Available USB 2.0 – 6300ESB Windows √ Chipset – Intel E7520/6300ESB • Two USB 2.0 channels on rear I/O Linux √ • Four parallel PCI Express connections to major • Two USB 2.0 channels on front VxWorks √ components for maximum I/O throughput Keyboard, Mouse Front and Rear I/O (with transition module CTM17) Memory – DDR2-400 • Via USB • The pin-outs of the transition module connectors • High-speed registered DDR2 SDRAM with 400 MHz • Legacy PS/2 controller emulation (rear I/O) correspond to standard PC connectors • 144-bit wide with enhanced error correction (ECC) (press-fit cables). Real-time clock • 32-bit CPU: up to 4 GByte soldered memory (usable • RTC 146818 compatible Function Front Rear size depends on operating system) • Li-battery Style 1 / 3 J3 / J4 /J5 • 64-bit CPU: up to 4 GByte soldered memory DVI-I - √ 1, 4 CMOS RAM Dual Gigabit Ethernet – Intel 82571EB VGA √ 3 √ 1, 4 • 242 bytes non-volatile CMOS RAM for BIOS use • Dual Channel Ethernet Controller with Gigabit Ethernet 1 √ 2, 3 √ 2 PCI Express x4 interface EEPROM Gigabit Ethernet 2 √ 2, 3 √ 2 • 10/100/1000BaseT auto-negotiation • 512 Kbit serial EEPROMs for non-volatile user data Fast Ethernet √ - • Front and/or rear I/O Reset √ √ 4 • Compliant to PICMG 2.16 Floppy LEDs √ √ • Via USB Fast Ethernet – Intel 82551QM USB 2.0 1-4 1-2 3-4 4 Watchdog • Single channel Ethernet Controller IDE primary onboard • Intel TCO timer • 10/100BaseT auto-negotiation IDE secondary √ • Front I/O • Intel 6300ESB watchdog SATA 1 √ 4 SATA 2 √ 4 Hard Disk or Flash Drive Timer COM 1-2 1 1, 2 • Internal 2.5” UDMA100 IDE hard disk or Flash Drive • Integrated in 6300ESB chipset Audio √ 4 for extended temperature range and higher shock/ • Legacy PC-AT timer GPIO (8 pins) - √ 4 vibration immunity) • High Precision Event Timer (HPET) PMC 1 √ √ PMC Extension Slots - IEEE P1386/1386.1 Temperature Sensors PMC 2 I/O √ √ • PMC1 (64-bit/133 MHz) and PMC2 (32-bit/33 MHz), • CPU die and pcb temperature software readable in *1 Rear DVI-I connector for DVI and VGA • Enhancement to processor PMC standard the range of –55 °C to +125 °C *2 Either front or rear as an order option VITA 32-2003 (non-monarch) LED (not in conduction cooled style) *3 32-bit/33 MHz PMC 2 slot is not available with • PMC2 slot not available with VGA, Gigabit Ethernet front VGA and/or Gigabit Ethernet ports and/or • Front panel ACPI System Status Indicator LED (red/ on the front or IDE installed (Fast Ethernet optional) IDE installed amber/green) • PMC1 signaling is 3.3 V only, PMC2 signaling is *4 Not available without J4 connector (order option) • CompactPCI hot swap (blue) on front panel 5 V tolerant. Styles Audio Serial I/O - RS232/422/485 Function Style 1 Style 3 • Line In, CD In • Two async. 16550 compatible full duplex serial Front Panel yes yes • Headphone, SPDIF Out channels at rear I/O Parts Soldered yes yes • AC97 link with codec • High-speed transfer up to 115.2 Kbaud with Li-Battery yes yes 16 byte FIFOs Ext. Temperature no yes • User selectable RS232/422/485 interface • COM1 optionally available at front via RJ45 ® CT11 Single Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Power Requirements Temperature • +5 V, +3.3 V, +12 V Required • Note: For detailed information about the operating temperature behavior of the board of any style it • -12 V If required by mounted PMC module is absolutely necessary to consult the manual. Power Consumption - typical operating current The processor type and speed, altitude, the use • Without keyboard, hard disk, modules, Ethernet (no or not use of Ethernet and video, ambient condi- link), measured at DOS prompt, no power savings. tions and the type of cooling influence the board temperature range. 512 MByte memory option. Processor 5 V 3.3 V Total Power Temperature (except conduction-cooled style) Core 2 Duo, 2.16 GHz 4.9 8.4 52.2 • All values under typical conditions without PMC module Core 2 Duo, 1.5 GHz 3.1 8.4 43.2 Range Operating Storage Core Duo, 2.00 GHz 4.0 8.4 47.7 Standard 0 °C to +55 °C –40 °C to +85 °C Core Duo, 1.66 GH 2.7 8.4 41.2 Extended –40 °C to +75 °C –40 °C to +85 °C • Without keyboard, hard disk, modules, Windows XP, Operating Storage 3D graphics active. Both Gigabit Ethernet channels linked, CPU running at instruction mix for maximum Humidity 5 – 95 % @ 40 °C 5 – 95 % @ 40 °C power consumption. Altitude 15,000 ft. (4.5 km) 40,000 ft. (12 km) 2 GByte memory option. Shock and Vibration Processor 5 V 3.3 V Total Power • Designed to meet VITA47 class EAC1 and EAC3 Core 2 Duo, 2.16 GHz 7.1 10.1 68.8 Core 2 Duo, 1.5 GHz 4.1 10.1 53.8 VITA 47 Core Duo, 2.00 GHz 5.8 10.1 62.3 • Designed to meet VITA47 class EAC1 and EAC3 Core Duo, 1.66 GHz 3.7 10.1 51.8 MTBF Power Allowances – PMC/XMC slots • Calculations are available in accordance with • +5 V, +3.3 V: Total power max. 7.5 W MIL-HDBK-217. • ±12 V: 100mA each Please contact Ge Intelligent Platforms. Mechanical – PICMG 2.0 Safety • 6U, 1 slot wide, (233 x 160 x 20) mm (with Flash Drive) • Designed to meet standard UL1950, CE class A, FCC-A or hard disk ® CT11 Single Slot 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Block Diagram Intel Core 2 Duo Core Duo Processor PCI-E DDR2 SDRAM PMC1/XMC with ECC (64-bit/133 MHz) PCI-X (4 Gbyte) Intel PCI-E PCI-E E7520 Intel VGA/DVI 6700 PXH PCI-E PCI PCI/PCI Dual Gigabit Bridge Ethernet SATA PCI PMC2 (32-bit/33 MHz) COM Intel USB 6300ESB LPC PCI GPIO Fast Ethernet AC97 EIDE Audio Hot Swap IPMI Ordering Information Hardware Accessories CTM17: I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) SCC784UE05CT11R: 7U,19” starter cage with 5 CPCI slots, backplane, HDD, DVD, power supply Operating Systems Extensive operating systems support is available, (see page 3 of this document). Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Intelligent Platforms. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-840A cPCI Backplane (64-bit/66 MHz)