GE Intelligent Platforms CR9 ® High Performance, Rugged 6U CompactPCI Embedded Computer Features • USB 2.0 ports, one front,4 rear of up to -40° to +85° C. Increased shock and ® ® vibration immunity is designed in by using • Intel Pentium M processor, 600 MHz • IEEE 1284 parallel port stiffener bars and wedge locks. Conformal to 1.8 GHz • Watchdog, temperature sensor coating is optional. • Optimized for harsh environments • Optional –40° to +85°C • Ultra compact, 1 slot The CR9 provides a unique feature set, • Optional Conduction cooling including up to 2 GB of DDR SDRAM (200) • Hot Swap (Full) PICMG 2.1 compliant, • High shock and vibration immunity with C-I-R-style with ECC, three independent on-board PCI stiffener bars and wedge locks buses, support for the CPCI backplane, two • System & non-system • Conformal coating PMC interfaces (64-bit/133 MHz and 32-bit/33 • Compliant to VITA 30.1-2002 & ANSI/VITA • Customer specific, low cost assembly versions MHz). A high level of functional integration 20-2001 (Gigabit Ethernet, two serial interfaces with CR9 is a 6U CompactPCI all-in-one CPU board • Extensive software support flexible RS-232 or RS-422/485, USB 2.0, inte- with an integrated low power Intel Pentium M • Up to 2 GB DDR SDRAM (200) with ECC grated HDD or flash drive, etc.) within a single processor and dual Gigabit Ethernet PICMG slot gives users the freedom to use the PMC • Flash drive up to 1 GB or local 2.5” hard disk 2.16 channels. The CR9 is designed to meet the interfaces as extension for their applications. • VGA/LCD up to 2048x1536, 16/32 MB harsh environmental requirements of markets The VGA/TFT interface is supported through DDR SDRAM like the heavy industry, simulation/training, test a high performance 2D/3D NVIDIA video con- and measurement, military and aerospace. • Two Gigabit Ethernet ports10/100/1000 troller able to drive dual displays in parallel. BaseT front or rear optional Based on the Intel Pentium M processor, the Versions with front panel I/O are available • PICMG 2.16 compliant CR9 platform is designed to support processor in various configurations with one or two • Two PMC extension slots, one 64-bit/133 speed starting with 600 MHz up to 1.6 GHz. It PMC interfaces. MHz and one 32-bit/33 MHz offers low power consumption and eliminates • Ultra ATA/100 onboard, second channel ® the need for on-board ventilation. Rugged Supported operating systems are Windows rear I/O needs are addressed with optional conduc- ® ® 2000, Windows XP, QNX, VxWorks, LynxOS , ® tion cooling (VITA 30.1-2002 and ANSI/VITA • 2x serial I/O with FIFOs RS-232/422/ Linux and others. 20-2001) and extended temperature range 485 interface ® CR9 High Performance, Rugged 6U CompactPCI Embedded Computer • Integrated 350MHz Palette-DAC for analog VGA BIOS Features Specifications monitors up to 2048x1536 • New AMI BIOS Core 8, in-system programmable ® CompactPCI - Hint HB6 PCI-to-PCI Bridge • DVI-I interface PanelLink single channel for TFT Flash ROM • PICMG 2.0 R3.0 compliant CPCI local bus standard displays up to 1280x1024 true color • CPU, memory and IDE auto-detection/selection (EDID displays PnP supported) • 64-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) • Integrated VGA, and Ethernet BIOS ROM • Fully compliant support for OpenGL 1.2 or 5 slots (66 MHz) • USB Mass Storage support and booting capability for all Windows operating systems and Linux • Supports System and Peripheral Mode (Floppy, HDD, CDROM) • Versions with front (not N-Style) or rear I/O available • J1+2, 2 mm pin and socket connectors • Password protection, BIOS post, system and video BIOS shadowing (IEC-1076-4-101) EIDE- ICH4 • Extensive setup with remappable serial/ • Ultra ATA/100 sync. DMA mode up to 100 MB/s Processor - µFCBGA, Low Power Design parallel ports • PIO mode 4 and bus master IDE up to 16 MB/s • Scalable processing power with flexible • Diskless, keyboardless and videoless operation processor design • Two devices supported via local EIDE connector and • Remote BIOS through serial port two devices alternative with PMC32/33 rear I/O • Intel Pentium M processor: 600 MHz to 1.8 GHz • High efficiency on-board switching regulator (DC/DC) Software Serial I/O - RS232/422/485 • Fanless cooling with heatsink • The following software is supported to the extent • Two async. 16550 compatible full duplex serial listed below. • See price list for latest CPU versions channels at rear I/O OS On Request Planned • High-speed transfer up to 115.2 kbaud with Chipset – Intel E7501/P64H2 WIN 2000 - √ 16 byte FIFOs • 400 MHz system bus to processor WIN XP - √ • User selectable RS232/422/485 interface • PCI burst mode transfers up to 512 MB/s QNX 4 + 6 - √ • COM1 optional available at front (not N-Style) (64-bit/66 MHz) VxWorks - √ • Two 64-bit wide PCIbusses with 66 MHz Parallel Port Lynx OS √ - • One 32-bit wide PCIbus with 33 MHz • Bi-directional, IEEE 1284 compatible enhanced Linux - √ • Cache Level 1 Level 2 parallel port (including EPP and ECP) for printer Front and Rear I/O (with transition module CTM12) Pentium M 32 KB 1024 KB, full speed General Purpose I/O • The pinouts of the transition module connectors Memory – DDR 200 • 8x GPIO (input or output) pins (rear I/O) corresponds to standard PC connectors • High-speed registered DDR SDRAM • Interrupt capability (edge, level) (press-fit cables). • Software configurable • 72-bit wide with error correction (ECC) Function Front Rear • 128 MB to 2 GB with soldered chips C-I-R-style J3/J4/J5 USB 2.0 – ICH4 • Note: Memory speed depends on selected DVID-I - √ • One USB 2.0 connector at front (not N-Style) processor type 3 1 VGA √ * √ * • 4 universal serial bus channels at rear 2 3 2 Eth 1 √ ** √ * Dual Gigabit Ethernet – Intel 82546GB Keyboard and Mouse 3 2 Eth 2 √ *v* √ * • Highly integrated dual channel Ethernet controller • PS/2 compatible Keyb+Mouse √ √ with 64-bit/66 MHz PCI local bus DMA Reset √ √ • 64 KB transmit and receive FIFO Real-time clock LEDs √ √ • 10/100/1000BaseT auto-negotiation • RTC 146818 compatible, on-board Li-battery USB 2.0 1-5 1 2-5 • Versions with front I/O available (not N-Style) CMOS RAM IDE primary - √ • Compliant to PICMG 2.16 • 114 bytes non-volatile CMOS RAM 3 IDE secondary onboard * - Hard Disk or Flash Drive Floppy - √ EEPROM • Internal 2.5” IDE hard disk or 2.5” flash drive COM 1-2 1 1, 2 • 512 KB serial EEPROMs for non-volatile user data (up to 1 GB, for extended temperature range and LPT - √ higher shock/vibration immunity) Floppy GPIO (8 pins) - √ • One channel 3.5“ floppy drive controller PMC Extension Slots - IEEE P1386/1386.1 PMC 64-bit/66 MHz √ √ 3 • 720 KB and 1.44 MB PMC 32-bit/33 MHz √ * √ • Compliant to ANSI/VITA 20-2001 (N-style only) *1 rear DVI-I connector for DVI and VGA • One high bandwidth 64-bit/133 MHz and Watchdog one 32-bit/33 MHz *2 either front or rear as an order option • Watchdog 1: 4.8 sec to 76 sec, 0.6 sec increments * 3 The 32-bit/33 MHz PMC slot is not available with VGA or • Watchdog 2: 1 min to 255 min, 1 min increments PMC interface Ethernet on the front, IDE secondary installed • User programmable • Enhancement to processor PMC standard VITA 32-2003 (non-monarch) Styles Timer Note: The 32-bit/33 MHz PMC slot is not available with Function C I R N • Integrated in E7501/ICH4 chipset VGA or Ethernet on the front, IDE secondary installed Front panel yes yes yes no Note: PMC front I/O is not supported with a CR9 in an Temperature Sensor Front stiffener no no no yes N-style version (conduction cooled) • CPU die and heatsink temperature software read- Middle stiffener no no yes yes able from –65°C to +127°C ® ™ Wedge locks no no no yes VGA and LCD – NVIDIA GeForce 4 410/420 Go • 256-bit 3D and 2D graphics accelerator Parts soldered yes yes yes yes LED (not N-Style) • On-chip 16/32 Mbytes frame buffer (66-190 MHz) Li-battery yes yes no no • Front panel LED System control (read) Hot-Swap - • 32-bit/33 MHz PCI interface compliant to PICMG 2.1 (not N-Style) Extended temperature no yes yes ™ • NVIDIA Digital Vibrance Control technology Conformal coating no no yes • Peripheral mode: Board can be inserted or removed in a powered system Conduction cooled no no yes • Dual CRTC/Simultaneous Dual Display (same or different surfaces) • System controller mode: Other, non system (periph- eral) boards can be removed or added with power on ® CR9 High Performance, Rugged 6U CompactPCI Embedded Computer Power Requirements Temperature – (N-style) • +5 V, +3.3V Required • Highest reachable operating temperature depends on processor type, speed and card edge temperature • ±12V Only if required by mounted PMC module • Value under typical conditions w/o ccPMC module, Power Consumption - typical operating current HDD or flash drive (*estimated) Operating Storage • w/o keyboard, hard disk, modules, Ethernet (no link), Extended –40°C to +85°C –40°C to +85°C measured at DOS prompt, no power savings. * Upper temperature limit could be lower depending on Pentium M 5 V 3.3 V Total Power configuration (processor, air, speed, etc.) 600 MHz, 256 MB 0.7A* 5.1A* 20.3W* Please contact factory with questions. 1.1 GHz, 512 MB 1.5A* 5.9A* 27.0W* Humidity 1.6 GHz, 2 GB 3.4A* 7.5A* 41.8W* • Operating: 5 - 95% @ 40°C • Storage: 5 - 95% @ 40°C • w/o keyboard, hard disk, modules, Windows XP, 3D graphics active. Both Gigabit Ethernet channels Altitude linked, CPU running at instruction mix for maximum • Operating: 15.000 ft. (4.5 km) power consumption. • Storage: 40.000 ft. (12 km) Pentium M 5 V 3.3 V Total Power • Vacuum for conduction cooled board (N-style) 600 MHz, 256 MB 0.9A 6.9A 27.3W Shock 1.1 GHz, 512 MB 2.3A 7.7A* 36.9W* • C-, I-Style: 12g/6 ms, 3 axis, up & down, 5 hits/direction 1.6 GHz, 2 GB 5.4A 9.3A* 57.7W* • R-Style: 20g / 6 ms, 3 axis, up & down, 5 hits / direction Power Allowances - PMC Slot • N-Style: 100g / 6 ms, 40g / 11 ms, 3 axis, up & down, • +5 V, +3.3V Total power max. 7.5 W 5 hits / direction • ±12 V 100 mA each Vibration Mechanical – PICMG 2.0 • C-, I-Style: 2g rms @ 5 to 100 Hz, 30 minutes each • 6U, 1 slot wide axis • 233 x 160 x 20 mm (including flash drive) or hard disk • R-Style: 2g rms @ 5 to 2000 Hz, 30 minutes each axis • Compliant to VITA 30.1-2002 for N-style board • N-Style: 14g rms @ 5 to 2000 Hz, 30 minutes each axis Temperature – (except N-style) MTBF • Highest reachable operating temperature depends on • Calculations are available in accordance with processor type, speed and ambient conditions (airflow) MIL-HDBK-217. Please contact factory. • TMDS option may reduce temperature range Safety • All values under typical conditions w/o PMC module, • Designed to meet standard UL1950, CE class HDD or flash drive A, FCC-A Operating Storage Standard 0°C to +70°C –40°C to +85°C Extended –40°C to +85°C –40°C to +85°C ® CR9 High Performance, Rugged 6U CompactPCI Embedded Computer C, I, R-Style Front Panel Versions Block Diagram Intel Pentium M Processor DDR SDRAM Intel E7501 with ECC 2 GB SMBus EIDE P64H2 USB ICH4 PCI PCI 64-bit/66 MHz 64-bit/ LPC 133 MHz Super I/O PCI to PCI Gigabit PMC1 Bridge PCI 32-bit/33 MHz Ethernet 1 Gigabit Ethernet 2 VGA PMC2 cPCIbus 64-bit/66 MHz Ordering Information C2K33200C Hardware Accessories CTM12 I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) SC304F Floppy disk 3.5 inch, 19“ box: 3U/4HP, cable SC306HI10G0 IDE hard disk 3.5“, 10 GB, 19“ box: 3U/6HP, cable ZKAAPS2SPLIT Cable for keyboard and mouse on front panel Operating Systems Extensive operating systems support is available. Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Intelligent Systems. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-790A