CR7 ® ® Single Slot Celeron /Pentium III PC ® 6U CompactPCI Embedded Computer Features ® ® • Intel Celeron 566 MHz ® ® • Intel Pentium III 700 MHz to 1 GHz • Ultra compact, 1 slot only ® • Embedded NT, Windows ® 98, Windows 2000, ® Windows NT , QNX, ® VxWorks , Linux® • Up to 512 MB SDRAM with ECC • 1.8“ Flash Drive • VGA/LCD up to 1600x1200 4(2) MB high-speed SDRAM • Fast Ethernet 10/100 Mb • Wide SCSI up to 40 MB/s • PCI bus enhanced IDE • MIL-STD-1553 ® • PMC extension slot CR7 is a CompactPCI all-in-one 6U single board computer designed to meet the needs of embedded application developers addressing markets like industrial • Four serial I/O with FIFOs automation, medical, scientific, imaging, telecommunication, military and aerospace. RS-232 or RS-422 interface The ultra compact single slot, all-in-one design with flexible processor and memory • Two IEEE 1284 parallel configurations, and an impressive array of on-board peripherals includes video ports interface, Ethernet, SCSI, optional MIL-STD-1553, and PMC extension. This • Two USB connectors combined with a custom specific assembly service provides optimized • Watchdog, NMI ticker, price/performance for a variety of OEM applications. temperature sensor Rugged needs are addressed with optional conduction cooling and extended • Single +5 volt supply only temperature range of up to -40°C to +85°C (conduction cooled), increased shock and • Optional -40°/+85°C vibration immunity using stiffener bars and wedge locks, and conformal coating. • Conduction cooling Special features include four serial channels with flexible RS-232 or RS-422 interfacing, LCD controller and a single +5V supply. Supported operating systems • High shock and vibration ® ® ® ® ® are Windows 2000, Windows NT , Windows 98, QNX, VxWorks , Linux and immunity with stiffener bars others. and wedge locks • Conformal coating • Custom specific, low cost assembly versions Single Board Computers Specifications EIDE CompactPCI - Intel® 21550 • Ultra DMA/33 sync. • 32-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) • DMA mode up to 33 MB/s • J1+2, 2 mm pin and socket connectors (IEC-1076-4-101) • PIO mode 4 and bus master IDE up to 16 MB/s • Three devices supported via local EIDE connector and rear I/O Processor - Socket 370 (FCPGA) or BGA2 • Scalable processing power with flexible processor design MIL-STD-1553 - DDC BU-61688 • Intel Celeron: 566 MHz & Intel Mobile Celeron: 400 MHz • BC, RT and MT mode, 128 KB shared RAM (limited access to • Intel Pentium III: 700 MHz to 1 GHz & max. 8 KB shared RAM, BU-61588 compatible) Mobile Pentium III: 500 MHz and 700 MHz (please see price • Transceiver with long and short stub interface list for latest CPU versions) • High efficiency on-board switching regulator (DC/DC) Serial I/O - RS-232/422 • Fanless cooling with heat sink • Four asynchronous 16550-compatible full-duplex serial ports • High-speed transfer up to 115.2 kb with 16 byte FIFOs Performance • COM1, COM2: RS-232 or RS-422 interface • 128MB RAM, 1024 x 768 64K color, ST34502LW HD • COM3+4: RS-232 or RS-422 interface Winstone 99 CPU Frequency Business High End Parallel Port • Two bi-directional Celeron 566 MHz 21.5 32.0 • IEEE 1284-compatible enhanced parallel port (EPP and ECP) Mobile Pentium III 500 MHz 24.0 34.0 Mobile Pentium III 700 MHz 26.1 43.4 Floppy Pentium III 700 MHz 26.1 43.4 • One channel 3.5” floppy drive controller Pentium III 850 MHz 27.0 47.0 • 720 KB and 1.44 MB Pentium III 1 GHz 28.0* 50.0* (* estimated) USB • Two 12 Mb/s universal serial bus channels Chipset - Intel 82443BX, 82371EB • 100 MHz system bus with Pentium III and Mobile Pentium III Keyboard and Mouse • 66 MHz system bus with Celeron • PS/2 compatible • PCI burst mode transfers faster than 110 MB/s, 32-bit wide PCIbus (33 MHz) Real-Time Clock • RTC 146818 compatible Cache • Celeron: L1: 32 KB, L2: 128 KB, full speed CMOS RAM • Pentium III: L1: 32 KB, L2: 256 KB, full speed • 114 bytes non-volatile CMOS RAM • Values also valid for Mobile processors Backup Memory - PC66/100 • On-board Li Battery (500 mAh) or +5V standby • 64 to 512 MB SDRAM, 72-bit wide with error correction (ECC) • Rugged design with soldered chips EEPROM • 4 kbit serial EEPROM for non-volatile user data Flash Drive • Internal 1.8 IDE Flash Drive for extended temperature range Watchdog and higher shock/vibration immunity • Activates reset under software control (550 ms) PMC Extension Slot - IEEE P1386/1386.1 Temperature Sensor • 32-bit PCI bus interface with front and rear I/O • Local and remote temperature (CPU case) software • Supports ccPMC Draft standard Vita 20 - 199x with N-style readable from -65°C to +127°C, 1.0°C increments VGA and LCD - CT 69030/6900 NMI-Ticker • 64-bit Windows accelerator and LCD flat panel interface • User programmable NMI timer 0.3 to 18 ms • On-chip high-speed 4/2 MB synchronous DRAM (83 MHz) Speaker • Flexible 9-, 12-, 15-, 18- or 24-bit panel TFT interface • Internal speaker (1.0 kHz to 4.2 kHz) CRT Resolution CT 69030 CT 69000 1024 x 768 16M @ 100Hz 64K @ 100Hz LED 1280 x 1024 16M @ 75Hz 256 @ 75Hz • On-board LED (red) user programmable 1600 x 1200 64K @ 60Hz - BIOS Features Fast Ethernet - AMD 79C973A • AMIBIOS, in-system programmable Flash ROM, CPU, memory • 10/100 Mb/s controller with PCI local bus DMA and IDE auto-detection/selection • 12 Kb FIFO buffers for Receive and Transmit • Integrated VGA, Ethernet and SCSI BIOS ROM • 10BaseT and 100BaseTX auto-negotiation interface • Password protection, BIOS post, system and video BIOS shadowing Wide SCSI - SYM 53C875 • Extensive setup with remappable serial/parallel ports • Wide SCSI controller with PCI local bus DMA • Operation without disk, keyboard, and video • SCSI transfer speed up to 40 MB/s • Active low power termination on-board Humidity Hot Swap - compliant to PICMG CompactPCI 2.1 • Operating: 5% to 95% @ 40°C, 15,000 ft (4.5 km) altitude • Other non-System boards can be removed or added with • Storage: 5% to 95% @ 40°C, 40,000 ft (12 km) altitude power on • Access to or interrupt on backplane/ENUM signal supported Shock and Vibration (C-, I, E-, R-style) • C-, I-style: 12g / 6ms, 2grms @ 5Hz to 100Hz H.110 Friendly • E-, R-style: 20g / 6ms, 2grms @ 5Hz to 2000Hz populated J4 (see Front and Rear I/O table) • Versions with non- does not interfere with H.110 bus on P4 Shock and Vibration (N-style) • 40g / 11ms, 14grms @ 5Hz to 2000Hz, 30 minutes each axis Power Requirements • +5V: Required • +3.3V, ±12V: Only if required by mounted PMC module Power Allowances - PMC Slot Styles • +5V, +3.3V: total power max. 7.5W • ±12V: 50 mA each Styles C I E R N Power Consumption • Typical current +5 Volt, 128 MB RAM without keyboard, Front panel √ √ √ √ - hard disk, modules, etc. Front stiffener - - - - √ • Idle values measured at DOS prompt, maximum power saving • Operating values measured at DOS prompt, no power saving Middle stiffener - - √ √ √ CPU Frequency Idle Operating Wedge Locks - - - - √ Celeron 566 MHz 1.5 A 3.4 A Parts soldered - - √ √ √ Mobile Pentium III 500 MHz 1.5 A 2.7 A Li battery √ √ - - - Mobile Pentium III 700 MHz 1.6 A 3.1 A Pentium III 700 MHz 1.6 A 4.6 A Ext. temperature - √ - √ √ Pentium III 850 MHz 1.7 A 5.4 A Conformal coated - - - √ √ Pentium III 1 GHz 1.7 A 5.9 A Conduction-cooled √ - - - - Mechanical • 6U, 1-slot wide , 233mm x 160mm x 20.32mm MTBF Front and Rear I/O with • Calculations are available in accordance with MIL-HDBK-217. Please contact SBS for details. Transition Module CTM6C Safety • All PWBs are manufactured with a flammability rating of 94V-0 Rear I/O Rear I/O by a UL recognized manufacturer. Function (J3 + J5) (J4) Front I/O VGA 10-pin - HD-15 Temperature • Note: For detailed information about the operating 10/100Base-TX 16-pin - RJ-45 temperature behavior of the board of any style it is absolutely Keyboard/Mouse - - Mini-DIN necessary to consult the manual. The processor type and 1 speed, the use of a PMC module and the type of cooling Multi I/O 26-pin - - influences the board temperature range. 26-pin Floppy - - • All values under typical conditions without PMC module (1.25 mm) USB (x2) - - USB (x1) Standard Temperature Ranges (except N-style) • Operating: 0° to 70°C COM 1–4 10-pin (x4) - D09 (x1) • Storage: -40° to +85°C LTP 1 26-pin - - Extended Temperature Ranges (except N-style) Reset, Speaker - - yes • Operating: -40° to +70°C LED - yes • Storage: -40° to +85°C 2 EIDE - 44-pin - Extended Temperature Ranges (N-style) LPT 2 - 26-pin - • Operating: -40° to +85°C • Storage: -55° to +105°C LCD - 40-pin - 50-pin 68-pin CPU Frequency Max. Card Edge Temp. SCSI - (narrow) (wide) Celeron 566 MHz 69°C MIL-STD-1553 yes - - Mobile Pentium III 500 MHz 85°C Mobile Pentium III 700 MHz 79°C PMC yes - - Pentium III 700 MHz 59°C 1 Multi-I/O connector with keyboard, mouse, two USB, reset, watchdog, Pentium III 850 MHz 53°C and speaker. 2 Additional 44-pin on-board connector for FlashDrive. Pentium III 1 GHz 38°C CR7 Block Diagram Ordering Information Chassis SCC784TE08CR7 Hardware Accessories Starter cage: 19”, 7U, 84TE card cage, 8x 6U CPCI slots (6U, right); CPC-R422C RS-422 driver for one channel (max. 2) 3x fan, 250W power supply +3.3V/12A, +5V/22A, +12V/7A, CTM6A I/O transition module for 6U backplane -5V/0.3A, -12V/0.8A, EMC, CD-ROM, 3.5” floppy drive, CTM6B As above with Wide-SCSI (68-pin) connector 10 GB hard disk, I/O transition module (CTM6C) with front panels CTM6C As above with J3, PMC, MIL-STD-1553, and (YLBCOM304A, YLBVGA304A, YLBLPT308C), 0ÞC/+50Þ C Wide-SCSI (68-pin) connector SC304F Floppy disk 3.5”,19” box: 3U/4TE cable Operating Systems SC306HI10G0 IDE hard disk 3.5”,10 GB,19” box: 3U/6TE cable DOS-MD600x MS-DOS operating system YLBCOM304A Flat cable for 2x COM, 3U/4HP front-panel WIN-98xC Windows 98 operating system YLBVGA304A Flat cable for VGA & 2x COM,3U/4HP front-panel WIN-NT4xC Windows NT 4.x operating system YLBLPT308C Flat cable for LPT, Ethernet (RJ45), keyboard & WIN-2000xC Windows 2000 operating system mouse (2x miniDIN), 3U/8HP front-panel VXW2-BCX7 VxWorks board support package, Tornado 2 XKAAPS2SPLIT Cable for keyboard and mouse on front panel WIN-ENT4xE Windows Embedded NT 4.x Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Memminger Str. 14 Albuquerque, NM 87110-4316 D-86159 Augsburg, Germany Tel 505.875.0600 Fax 505.875.0400 Tel +49-821-5034-0 Fax +49-821-5034-119 Email info@sbs.com Email aug-info@sbs.com For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2005 SBS Technologies, Inc. 20050301