GE INTELLIGENT PLATFORMS CR3
Specifications
Form Factor
CompactPCI
Chipset
100 MHz, 64-bit system bus SDRAM controller with 64-bit 100 MHz memory interface Interrupt controller 32-bit 33MHz PCI bus interface UltraDMA/33 ATA controller DMA controller Three internal timers Real-Time Clock for date and time keeping, 128-byte SRAM Two USB serial ports General purpose I/O XBus interface SMBus serial link port
Environmental
Highest reachable operating temperature depends on ambient conditions. Operating Storage Extended –40°C to +85°C –55°C to +105°C Humidity Operating: 5 - 95% @ 40°C Storage: 5 - 95% @ 40°C Altitude Operating: 15,000 ft. (4.5 km) Storage: 40,000 ft. (12 km) Shock N-Style 100g peak/6 ms 40g peak/11 ms Vibration N-Style 14g rms/–º5–2000 Hz
Ethernet
IEEE 802.3 Ethernet 100Base-TX, and 10Base-T operation Dual channel at rear I/O Full-duplex operation Two independent MAC and PHY functions with common PCI host interface
Flash Memory
Flash: Am29LV040B 512 KB Hardware selected write protection Non-volatile CompactFlash storage card assembly attached to IDE bus Daughter card attached to J4 IDE connector Daughter card accommodates two CompactFlash cards
Memory
128 MB SDRAM 64-bit 100 MHz memory bus Rugged design with soldered chips
MTBF
Calculations TBD in accordance with MIL-HDBK-217.
Power Consumption
15W typical (20W max.)* * Power values are preliminary estimates
Power Requirements
+5V, +3.3V Required
Processor
Intel Celeron ULV
Ultra low voltage 1.10V @ 650 MHz, 0.95V @ 400 MHz
Same core as Intel Pentium III processor
16 KB L1 data and instruction caches
256 KB shared L2 cache
Safety Criteria
All PWBs are manufactured with flammability rating of 94V-0 by UL recognized manufacturer
Supervisory
8-bit interface Two NS16C550A-compatible UART serial ports at rear I/O (independent on-board RS-422 receivers and drivers provided) Parallel port PS/2 keyboard and mouse port at rear I/O Watchdog timer General purpose I/O
Technology
On-board temperature monitoring and processor temperature monitoring
Features
- 128 MB SDRAM
- 512 KB boot flash
- Conduction-cooled
- Dual CompactFlash storage on a mezzanine card
- Dual RS-422 serial ports
- Dual USB ports
- Dual-port 10/100Base-TX Ethernet
- IEEE 1284 parallel port
- Intel® Ultra Low Voltage (ULV) Celeron® processor
- Real-Time clock
- System controller or peripheral card operation.
- Temperature monitoring capability
- Watchdog timer
Datasheet
Extracted Text
GE Intelligent Platforms CR3 ® 3U CompactPCI Conduction-cooled Single Board Computer Features The CR3 is a CompactPCI Single Board Com- Specifications ® ® puter (SBC) driven by an Intel Ultra Low Voltage • Intel Ultra Low Voltage (ULV) Celeron Processor - ULV Celeron (ULV) Celeron processor in a conduction- processor • Ultra low voltage 1.10V @ 650 MHz, 0.95V @ 400 MHz cooled 3U form factor. The CR3 is designed • Same core as Intel Pentium III processor • Conduction-cooled for embedded processing applications using • 16 KB L1 data and instruction caches • System controller or peripheral card operation. CompactPCI-based 32-bit* architecture. The • 256 KB shared L2 cache • 128 MB SDRAM CR3 is built for harsh and demanding operating Chipset - 82443MX100 PCIset environments with an extended operation tem- • 512 KB boot flash • 100 MHz, 64-bit system bus perature range of –40° to +85°C and extended • SDRAM controller with 64-bit 100 MHz memory • Dual CompactFlash storage on a shock and vibration tolerances as well. interface mezzanine card • Interrupt controller • Real-Time clock • 32-bit 33MHz PCI bus interface The CR3 is equipped with 128 MB of SDRAM • UltraDMA/33 ATA controller and 512 KB of boot flash. For increased flex- • Dual-port 10/100Base-TX Ethernet • DMA controller ibility, the CR3 includes two RS-422 serial • Dual RS-422 serial ports • Three internal timers ports, two fast Ethernet ports, a parallel port, • Real-Time Clock for date and time keeping, • Dual USB ports a PS/2 keyboard/mouse port, and an optional 128-byte SRAM • IEEE 1284 parallel port ® dual CompactFlash storage disk mounted • Two USB serial ports • General purpose I/O on a daughter card. • Watchdog timer • XBus interface • Temperature monitoring capability • SMBus serial link port The Intel ULV Celeron processor, based on ® the same processor core as the Pentium III, Memory - PC100 is optimized for high performance with low • 128 MB SDRAM • 64-bit 100 MHz memory bus power consumption which makes the CR3 • Rugged design with soldered chips ideal for power-critical applications. The ULV Celeron processor core uses only +1.1V when Flash - Am29LV040B operating at 650 MHz or 0.95V at 400 MHz. • 512 KB • Hardware selected write protection For flexibility of system design, the CR3 ® CompactFlash Flash Disk can be integrated as a system controller or • Non-volatile CompactFlash storage card assembly processing peripheral card through the dual- attached to IDE bus mode functionality of the PCI 6254 PCI/PCI • Daughter card attached to J4 IDE connector • Daughter card accommodates two Bridge chip. CompactFlash cards * The CR3 does not support 64-bit backplane. ® CR3 3U CompactPCI Conduction-cooled Single Board Computer Super I/O - FDC37B727 Block Diagram • 8-bit interface • Two NS16C550A-compatible UART serial ports at rear I/O (independent on-board RS-422 receivers and drivers provided) Debug +3.3V +5V • Parallel port Header (J3) ULV • PS/2 keyboard and mouse port at rear I/O DC/DC Celeron • Watchdog timer Converter Processor • General purpose I/O Temperature Sensor PCI/PCI Bridge - 6254 PCI/PCI Bridge • Dual mode operation for system controller and peripheral card functionality PCI 6254 cPCI bus Mem bus PCI/PCI 82443MX100 SDRAM Ethernet - 82546EB Bridge PCIset • IEEE 802.3 Ethernet 100Base-TX, and 10Base-T operation SM bus • Dual channel at rear I/O Port 0 82546EB • Full-duplex operation Ethernet • Two independent MAC and PHY functions with Port 1 Controller PCI local bus common PCI host interface Temperature Sensor - MAX6658 PS2 Mouse Xbus • On-board temperature monitoring and processor FD37B727 PS2 Keyboard temperature monitoring Super I/O COM1 Controller JTAG Scan Chain 29LV040 COM2 • ULV Celeron (tested separately) Reset CPLD Boot Flash • 82546EB Ethernet controller Parallel Port • PCI 6254 PCI/PCI Bridge GPIO Port • XC95144XL CPLD USB Port 0 Power Requirements USB Port 1 • +5V, +3.3V Required Power Consumption - Typical Current Dual CompactFlash • 15W typical (20W max.)* Daughter Card * Power values are preliminary estimates IDE bus Temperature • Highest reachable operating temperature depends on ambient conditions. Ordering Information Operating Storage CR30012N Extended –40°C to +85°C –55°C to +105°C Accessories Humidity TM-CR3 I/O Transition Module • Operating: 5 - 95% @ 40°C Operating Systems • Storage: 5 - 95% @ 40°C GE Intelligent Platforms supports various operating systems. Please contact us for current offerings Altitude • Operating: 15,000 ft. (4.5 km) • Storage: 40,000 ft. (12 km) Shock • N-Style 100g peak/6 ms 40g peak/11 ms Vibration About GE Intelligent Platforms • N-Style 14g rms/–º5–2000 Hz GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance MTBF technology company and a global provider of hardware, software, services, and expertise in automation • Calculations TBD in accordance with MIL-HDBK-217, please contact the factory and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, Safety consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms • All PWBs are manufactured with flammability rating of 94V-0 by UL recognized manufacturer is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-791A XB-IDE J4 cPCI J2 cPCI J1
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the CR3?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods