GE Intelligent Platforms CR11 Rugged 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor • Optional –40 °C to +85 °C Features Increased shock and vibration immunity ® TM is designed in by using optional stiffener • Intel Core 2 Duo processor 1.5 GHz • Optional conduction cooling bars and wedge locks. Conformal coating and 2.16 GHz • Optional conformal coating ® TM is optional. • Intel Core Duo processor 1.66 GHz • High shock and vibration immunity with and 2.0 GHz stiffener bars and wedge locks The CR11 provides a unique feature set, ® • Intel Celeron M processor ULV 423, • Customer specific, low cost assembly including up to 4 GB of DDR2 SDRAM 1.06 GHz versions (200 MHz) with enhanced ECC, four ® • PICMG 2.1 (Hot Swap ) compliant • RoHS compliant independent on-board PCI buses, system • Ultra compact, one slot host and peripheral mode support for • System and non-system functionality the CPCI backplane, two PMC interfaces ® • Up to 4 GB DDR2 SDRAM (200 MHz) The CR11 is a 6U CompactPCI CPU board (64-bit/133 MHz and 32-bit/33 MHz). Instead ™ with ECC with integrated dual core Intel Core 2 Duo or of the PMC1, a PCI Express based XMC Intel Core Duo Processor and dual Gigabit • Flash drive or local UDMA100 interface is available on request. A high Ethernet PICMG 2.16 channels. The Intel dual 2.5” hard disk level of functional integration (two Gigabit core processor includes two optimized Ethernet, one Fast Ethernet, two serial • 2x SATA, RAID 0/1 capable execution cores in a single processor case. interfaces (RS-232 or RS-422/485), USB • Front/rear VGA up to 1280 x 1024, rear This enables execution of parallel threads or 2.0, integrated HDD or Flash drive) within a DVI-I up to 1280 x 1024, 32 MB RAM applications on separate cores with dedi- single slot gives users the freedom to use • Two Gigabit Ethernet ports 10/100/1000 cated CPU resources. The CR11 supports a the PMC interfaces for their application- BaseT front or rear optional 32- and 64-bit processor architecture. The specific I/O. The VGA/DVI interface is • PICMG 2.16 compliant CR11 is designed to meet the requirements supported through a high performance • One front Fast Ethernet port ® of markets such as automation, simulation/ 2D/3D ATI video controller capable of • Two PMC extension slots, one training, test and measurement, and military. driving two displays in parallel. 64-bit/133 MHz and one 32-bit/33 MHz • One XMC interface on request Based on the Intel Core Duo Processor, the Versions with front panel I/O are available platform is designed to support processor in various configurations with one or two • 2x serial I/O with FIFOs speeds from 1.06 GHz up to 2.0 GHz. The PMC interfaces. The PMC1 interface can be RS-232/422/485 interface Intel Core 2 Duo runs at 1.5 GHz and ordered as an XMC interface instead. • 4x USB 2.0 ports, two front and two 2.16 GHz. Rugged needs are addressed on rear ® with optional conduction cooling and Supported operating systems are Windows , • Audio codec ® ® extended temperature range of -40 °C to Linux and VxWorks. Integrity is available • Watchdog, temperature sensors +85 °C (depends on selected board options). on request. CR11 Rugged 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor • Dual CRT/Simultaneous Dual Display (same or Software Specifications different surfaces) • The following software is supported to the extent Processor - µFCBGA, Low Power Design • Integrated 300 MHz Palette DAC for analog VGA listed below. • Scalable processing power with flexible monitors up to 1280 x 1024 OS On Request Planned Available ® processor design for TFT • Single channel DVI-I interface PanelLink Windows √ • Supports 32-bit and 64-bit processor architecture displays up to 1280 x 1024 true color (EDID displays Linux √ • 64-bit: Intel Core 2 Duo processor: 1.50 GHz and PnP supported) VxWorks √ 2.16 GHz • Fully compliant support for OpenGL for all Windows Integrity √ • 32-bit: Intel Core Duo processor: 1.66 GHz and 2 GHz operating systems and Linux • 32-bit: Intel Celeron M processor ULV 423: 1.06 GHz • Versions with front (not in conduction-cooled style) or Front and Rear I/O (with transition module CTM17) • High efficiency on-board switching regulator (DC/DC) rear I/O available • The pin outs of the transition module connectors • Fanless cooling with heat sink (rear I/O) correspond to standard PC connectors EIDE – 6300ESB * Contact factory for latest CPU versions (press-fit cables). • Ultra ATA/100 sync. DMA mode up to 100 MB/s Processor FSB MHz Level 2 Cache • PIO mode 4 and bus master IDE up to 16 MB/s Function Front Rear Core 2 Duo 667 4 MB • One device via on board connector and two devices Style 1 / 3 J3 / J4 /J5 Core Duo 667 2 MB via rear I/O available 1, DVI-I - √ Celeron M 533 1 MB 3 1, VGA √ √ General Purpose I/O 2, 3 2 Gigabit Ethernet 1 √ √ CompactPCI – PLX 6466 PCI-to-PCI Bridge • 8 GPIO (input or output) pins 2, 3 2 Gigabit Ethernet 2 √ √ • PICMG 2.0 R3.0 compliant CPCI local bus standard • Software configurable Fast Ethernet √ - • 64-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) or USB 2.0 – 6300ESB Reset √ √ 5 slots (66 MHz) • Two USB 2.0 channels on rear I/O LEDs √ √ • Supports System Host and Peripheral Mode • Two USB 2.0 channels on front (not in conduction- USB 2.0 1-4 1-2 3-4 • J1+2, 2 mm pin and socket connectors cooled style) IDE primary onboard (IEC-1076-4-101) Keyboard, Mouse IDE secondary √ Chipset – Intel E7520/6300ESB • Via USB SATA 1 √ • Four parallel PCI Express connections to major • Legacy PS/2 controller emulation SATA 2 √ components for maximum I/O throughput COM 1-2 1 1, 2 Real-time clock Memory – DDR2-400 Audio √ • RTC 146818 compatible • High-speed registered DDR2 SDRAM with 400 MHz GPIO (8 pins) - √ • Li-battery (not in conduction-cooled style) • 144-bit wide with enhanced error correction (ECC) PMC 1 (XMC on req.) √ √ CMOS RAM • 32-bit CPU: up to 4 GB soldered memory (usable size PMC 2 I/O √ √ • 242 bytes non-volatile CMOS RAM for BIOS use depends on operating system) *1 Rear DVI-I connector for DVI and VGA • 64-bit CPU: up to 4 GB soldered memory *2 Either front or rear as an order option EEPROM *3 The 32-bit/33 MHz PMC2 slot is not available with VGA or • 512 Kbit serial EEPROMs for non-volatile user data Dual Gigabit Ethernet – Intel 82571EB Ethernet on the front or with IDE installed. • Dual Channel Ethernet Controller with Floppy Styles PCI Express x4 interface • Via USB • 10/100/1000BaseT auto-negotiation Function Style 1 Style 3 Style 6 Style 8/9 Watchdog • Versions with front I/O available (not conduction- Front Panel yes yes yes no • Intel TCO timer cooled style) Front Stiffener no no no yes • Intel 6300ESB watchdog • Compliant to PICMG 2.16 Middle Stiffener no no yes yes Timer Wedge Locks no no no yes Fast Ethernet – Intel 82551QM • Integrated in 6300ESB chipset Parts Soldered yes yes yes yes • Single channel Ethernet Controller • Legacy PC-AT timer Li-Battery yes yes no no • 10/100BaseT auto-negotiation • High Precision Event Timer (HPET) Ext. Temperature no yes yes yes • Front I/O (not conduction-cooled style) Conformal Temperature Sensors Hard Disk or Flash Drive Coating no no yes yes • CPU die and pcb temperature software readable in Conduction • Internal 2.5” UDMA100 IDE hard disk or the range of –55 °C to +125 °C Cooled no no no yes Flash Drive for extended temperature range and higher shock/vibration immunity) LED (not in conduction-cooled style) Power Requirements • Front panel ACPI System Status Indicator LED (red/ • +5 V, +3.3 V, +12 V Required PMC Extension Slots - IEEE P1386/1386.1 amber/green) • -12 V If required by mounted PMC module • PMC1 (64-bit/133 MHz) and PMC2 (32-bit/33 MHz), • CompactPCI hot swap (blue) on front panel XMC (PCIe x4) on PMC1 available on request. Power Consumption - typical operating current • Enhancement to processor PMC standard Audio • Without keyboard, hard disk, modules, Ethernet (no VITA 32-2003 (non-monarch) • Line In, CD In link), measured at DOS prompt, no power savings. • PMC1 signaling is 3.3 V only, PMC2 signaling is • Headphone, SPDIF Out 512 MB memory option. 5 V tolerant. • AC97 link with codec Processor 5 V 3.3 V Total Power NOTE: PMC front I/O is not supported with CR11 in Hot Swap - compliant to PICMG 2.1 Core 2 Duo, 2.16 GHz 4.9 8.4 52.2 style 8. • Peripheral mode: Full CompactPCI hot swap Core 2 Duo, 1.5 GHz 3.1 8.4 43.2 Serial I/O - RS232/422/485 • System Host mode: CompactPCI ENUM# event Core Duo, 2.00 GHz 4.0 8.4 47.7 • Two async. 16550 compatible full duplex serial supported through ACPI or legacy driver Core Duo, 1.66 GH 2.7 8.4 41.2 channels at rear I/O BIOS Features Celeron M, 1.06 GHz 1.2 8.4 33.7 • High-speed transfer up to 115.2 Kbaud with • AMI BIOS Core 8, in-system programmable Flash ROM 16 byte FIFOs • Automatic system configuration • User selectable RS232/422/485 interface • Integrated VGA, SATA RAID and Ethernet PXE ROM • COM1 optionally available at front (RJ45), not in style 8 • USB Mass Storage support VGA and DVI – ATI X300™ • Password protection • 256-bit 3D and 2D graphics accelerator • Headless support • On-chip 32 MB memory • Remote console through serial port • PCI Express x4 interface CR11 Rugged 6U CompactPCI SBC with Dual Core 32- or 64-bit Processor Power Consumption - typical operating current (cont) Block Diagram • Without keyboard, hard disk, modules, Windows XP, 3D graphics active. Both Gigabit Ethernet channels linked, CPU running at instruction mix for maximum power consumption. Intel 2 GB memory option. Core 2 Duo Core Duo Processor 5 V 3.3 V Total Power Processor Core 2 Duo, 2.16 GHz 7.1 10.1 68.8 Core 2 Duo, 1.5 GHz 4.1 10.1 53.8 PCI-E Core Duo, 2.00 GHz 5.8 10.1 62.3 DDR2 SDRAM Core Duo, 1.66 GHz 3.7 10.1 51.8 PMC1/XMC with ECC PCI-X (64-bit/133 MHz) (4 GB) Celeron M, 1.06 GHz 1.4 10.1 40.3 Intel PCI-E PCI-E E7520 Intel Power Allowances – PMC/XMC slots VGA/DVI 6700 • +5 V, +3.3 V: Total power max. 7.5 W PCI-E PXH PCI PCI/PCI • ±12 V: 100mA each Dual Gigabit Bridge Ethernet Mechanical – PICMG 2.0 • 6U, 1 slot wide, (233 x 160 x 20) mm with Flash Drive or hard disk SATA PCI PMC2 • Compliant to VITA30.1-2002 for conduction- (32-bit/33 MHz) cooled board Temperature COM Intel • Note: For detailed information about the operating USB 6300ESB temperature behavior of the board of any style it is LPC PCI GPIO absolutely necessary to consult the manual. The pro- Fast Ethernet cessor type and speed, altitude, the use or not use of AC97 Ethernet and video, ambient conditions and the type EIDE Audio of cooling influence the board temperature range. Hot Swap Temperature (except conduction-cooled style) • All values under typical conditions without PMC module Range Operating Storage Style 1 0 °C to +55 °C* –40 °C to +85 °C Ordering Information Style 3/6 –40 °C to +75 °C* –40 °C to +85 °C *Note: Without battery, the storage temperature is -55 °C to +105 C Hardware Accessories CTM17: I/O transition module for 6U backplane (IEEE 1101.11-1998 compliant) Temperature (conduction-cooled style) SCC784UE05CR11R: 7U, 19” starter cage with 5 CPCI slots, backplane, HDD, DVD, power supply • All values under typical conditions without ccPMC module Operating Systems Range Operating Storage Extensive operating systems support is available, (see page 2 of this document). Style 8 –40 °C to +80 °C –55 °C to +105 °C Chassis with power supplies, backplanes and drives on request. Style 9 –40 °C to +85 °C –55 °C to +105 °C For detailed information and further options, contact GE Intelligent Platforms. Operating Storage Humidity 5 – 95 % @ 40 °C 5 – 95 % @ 40 °C Altitude 15,000 ft. (4.5 km) 40,000 ft. (12 km) • Vacuum for conduction cooled board Shock and Vibration About GE Intelligent Platforms • Designed to meet VITA47 class EAC1, EAC3, EAC6, ECC4 GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance VITA 47 technology company and a global provider of hardware, software, services, and expertise in automation • Designed to meet VITA47 class EAC1, EAC3, EAC6, ECC4 and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology MTBF that provides customers a sustainable advantage in the industries they serve, including energy, water, • Calculations are available in accordance with consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms MIL-HDBK-217. Please contact Ge Intelligent Platforms. is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. Safety For more information, visit www.ge-ip.com. • Designed to meet standard UL1950, CE class A, FCC-A GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 03.10 GFA-852 cPCI Backplane (64-bit/66 MHz)