GE INTELLIGENT PLATFORMS CPCI-7055/CPCI-7055RC
Specifications
Form Factor
PICMG
Environmental
Operating: 0° to +55° C Storage: -25° to +80° C Relative humidity: 10% to 90%, non-condensing Shock 10 Gs, 16 ms half sine, 6 axis, 10 pulses each Vibration 6 Gs RMS (20 – 2000 Hz) random, 0.0185 G2 per Hz spectrum
Ethernet
Three dedicated 10/100/1000BaseTX Ethernet ports -One via a RJ45 front panel port -Two available through a PICMG 2.16 or CompactPCI J3 backplane connection
Features
Up to 2 GB of CompactFlash
LPC I/O
Primary IDE interface activity Board status Power Hot swap LAN activity (located on each RJ45)
Mechanical
Dimensions 6U single slot Eurocard form factor Height 9.2 in. (233.4 mm) Depth 6.3 in. (160 mm) Thickness 0.8 in. (20.3 mm)
MTBF
361,616 hours
OS
Linux VxWorks
Other Features
One serial port on front panel Two additional ports available through the CPCI J3 connector IDE and hard disk support Hardware reset on front panel User programmable watchdog timer Status LEDs on front panel
PMC #1
Two 64-bit/100 MHz PCI-X on PMC expansion sites -Backward compatible to 5V, 33 MHz -Supports double-wide PMC IEEE 1386.1 compliant
Power Requirements
+3.3 VDC, (±5%) 1.7A (typical), 3.04A maximum +5 VDC (±5%) 3.2A (typical), 6.0A maximum ±12 VDC (±5%), 50 mA maximum
Processor
IBM 750GX PowerPC 1.0 GHz Advanced L2 cache 1 MB (IBM 750GX) Utilizes the Next Generation Marvell PowerPC chipset with 2 MB integrated SRAM
SDRAM
Up to 1 GB DDR 400 SDRAM with ECC
Serial
Three high performance serial ports: two support asynch RS232/422/RS485 on rear I/O J3, and one RS232 serial port on front panel using RJ45 connector
Features
- 64-bit/66 MHz CompactPCI bus interface
- Operating system support for VxWorks® and Linux®
- Operating temperature from 0° to +55° C
- Passive heat sink
- Processor speeds up to 1.0 GHz
- RoHS compliant
- Three independent 10/100/1000BaseTX Ethernet ports
- Ultra DMA IDE Controller
- Up to 1 GB DDR 400 SDRAM
- Up to 2 GB CompactFlash
- User programmable watchdog timer
Datasheet
Extracted Text
GE Intelligent Platforms CPCI-7055RC ® ® PowerPC CompactPCI Single Board Computer Features The CPCI-7055RC is a single slot CompactPCI Specifications single board computer (SBC) offering exceptional • Processor speeds up to 1.0 GHz CPU processing performance via the 750GX PowerPC • Operating temperature from 0° to +55° C • IBM 750GX PowerPC 1.0 GHz processor, that delivers a solution with the • Up to 1 GB DDR 400 SDRAM robustness, reliability, flexibility and system • Advanced L2 cache • Up to 2 GB CompactFlash features required for your most demanding - 1 MB (IBM 750GX) embedded computing applications. It features • Three independent 10/100/1000BaseTX • Utilizes the Next Generation Marvell PowerPC Ethernet ports the next generation Marvell® Discovery™ III chipset with 2 MB integrated SRAM chipset and offers up to 1 GB Double Data Rate • Ultra DMA IDE Controller (DDR) 400 SDRAM. The CPCI-7055RC also SDRAM • 64-bit/66 MHz CompactPCI bus interface features dual PMC sites (64-bit/100 MHz PCI-X, • Up to 1 GB DDR 400 SDRAM with ECC • User programmable watchdog timer backward compatible to 5V, 33 MHz PCI), up to 2 • Passive heat sink GB CompactFlash option, three high CompactFlash ® performance serial ports, and three • Operating system support for VxWorks • Up to 2 GB of CompactFlash ® 10/100/1000 Ethernet ports. and Linux Ethernet • RoHS compliant A few key benefits of the CPCI-7055RC, that help • Three dedicated 10/100/1000BaseTX Ethernet ports make this SBC the market leader, are highlighted - One via a RJ45 front panel port below: - Two available through a PICMG 2.16 or • High performance control and data/vector CompactPCI J3 backplane connection processing available on the IBM 750 PMC Expansion processor permit integration of computing functions and data processing in a single slot. • Two 64-bit/100 MHz PCI-X on PMC expansion sites • Extensive peripheral interfaces simplify - Backward compatible to 5V, 33 MHz system configuration and reduce the number - Supports double-wide PMC of hardware pieces required to implement • IEEE 1386.1 compliant your solution. Serial Interfaces • High-density non-volatile storage options • Three high performance serial ports: two support provide the flexibility for stand-alone asynch RS232/422/RS485 on rear I/O J3, and one operations or extensive data logging. RS232 serial port on front panel using RJ45 • User configurable PICMG 2.16, providing connector Ethernet across the backplane as well as supporting PICMG 2.1 Rev. 1.0 CompactPCI Hot Swap giving system-level flexibility for multiple CompactPCI system functions. • Onboard monitoring of temperature and voltages with software access enables application-dependent environmental solutions. CPCI-7055RC PowerPC CompactPCI Single Board Computer Specifications Block Diagram Other Interfaces • One serial port on front panel - Two additional ports available through the CPCI J3 connector • IDE and hard disk support • Hardware reset on front panel • User programmable watchdog timer • Status LEDs on front panel PICMG Compliance • High availability hot swap (PICMG 2.1 Rev. 2.0) • Universal signaling support (PICMG 2.0 Rev. 3.0) Front Panel Status LEDs • Primary IDE interface activity • Board status • Power • Hot swap • LAN activity (located on each RJ45) Operating System Support • Linux • VxWorks Power Requirements • +3.3 VDC, (±5%) 1.7A (typical), 3.04A maximum • +5 VDC (±5%) 3.2A (typical), 6.0A maximum • ±12 VDC (±5%), 50 mA maximum Environmental Specifications • Operating: 0° to +55° C • Storage: -25° to +80° C • Relative humidity: 10% to 90%, non- condensing Shock • 10 Gs, 16 ms half sine, 6 axis, 10 pulses each Vibration Ordering Information • 6 Gs RMS (20 – 2000 Hz) random, 0.0185 G2 per VMICPCI-7055RC-32x110 Hz spectrum 6U cPCI SBC - 1 GHz 750GX, 1 GB DDR SODIMM, no CompactFlash, Ethernet via J3, 2x PMC, 64 MB bootflash, 32 KB NVRAM, 3x serial ports, RoHS compliant MTBF • 361,616 hours VMICPCI-7055RC-31x110 6U cPCI SBC - 1GHz 750GH, 512 MB SODIMM, no CompactFlash, Ethernet via J3, 2x PMC, 64 MB Dimensions bootflash, 32kb NVRAM, 3x serial ports, RoHS Compliant • 6U single slot Eurocard form factor VMIACC-7055RC-000 • Height 9.2 in. (233.4 mm) Rear Transition Module for the CPCI-7055, RoHS compliant. • Depth 6.3 in. (160 mm) • Thickness 0.8 in. (20.3 mm) About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 11.10 GFA-702
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the CPCI-7055/CPCI-7055RC?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods