����������������� ��������� ������������������������ ���� �������� � Simultaneous Bus Controller, 31 Remote Terminals and Bus Monitor � 1 or 2 independent MIL-STD-1553 dual-redundant channels for 3U and 6U platforms � Easy-to-use BusTools/1553 Windows-based GUI bus analyzer available � Advanced, high-level software API libraries � Multi-function and The cPCI-1553 provides the highest ������������������������� single-function versions level of performance and flexibility for The cPCI-1553 can provide one or two the MIL-STD-1553A/B protocol on the � Conditional BC branching on single-function interfaces with all the CompactPCI bus. The cPCI-1553 is real-time message data or features and functionality of the integrated with powerful software that status multifunction versions, but only one reduces development time. All databus major operational mode is enabled at � Aperiodic message insertion functionality is supported from our a time - emulating either a Bus advanced API (Application Programming � Real-time bus playback with RT Controller or 31 Remote Terminals or Interface). Standard features include edit mode Bus Monitor. realtime bus playback (with ability to � Flexible I/O triggering edit out RTs), aperiodic message �������� insertion, error injection/detection, � 1 Mbyte shared RAM per Included with the cPCI-1553 is conditional BC branching, 45-bit channel Condor’s flexible, high-level API which timetags and “Oneshot” BC operation. � Supports MIL-STD-1553A and B supports up to 10 independent 1553 Provides host software synchronization Notice II channels. Windows XP, 2000, Me, NT, to pulses from external timing sources 98, 95, Linux Kernel (2.4 and 2.6), � (IRIG, GPS, etc). The Bus Monitor Error injection/detection VxWorks, LabWindows/CVI, Visual mode provides 100% bus monitoring of � Variable output voltage optional Basic and source code support is fully loaded MIL-STD-1553 buses. provided. LabVIEW, LabVIEW Real-Time ������������������������ and Solaris support as well as BusTools/1553, Condor’s GUI bus One or two multi-function interfaces analysis, simulation and data logging are available on a single cPCI board. solution for MIL-STD-1553, are They can operate simultaneously as a optionally available. Condor’s high BC, up to 31 RTs and as a BM. It can performance and intuitive software emulate an entire dual-redundant solutions provide complete and channel internally, eliminating the need simplified access to MIL-STD-1553 for external hardware to simulate functionality for development, missing nodes. integration, test, embedded and maintenance applications. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 ��������� ����������������� ������������������������� ���� ��������������������� �������������� *������������� �������� ■ Programmable control over: ■ 3U CompactPCI card - Major and minor frame content and timing ■ 6U CompactPCI card - Intermessage gap times ������������� - Response time-out and late response ■ Operating temperature range: 0°C to +70°C ■ Modify messages, data or setup while card is running ■ Extended temperature range available ■ Insert aperiodic messages into a running BC list ■ “Oneshot” mode for simplified BC operation �������� ■ Conditional message sequencing based on real-time ■ API - Includes high-level API libraries for Windows XP , 2000, message data or status Me, NT, 98, 95, Linux Kernel (2.4 and 2.6), ■ Selectable interrupt generation and status messages LabWindows/CVI, VxWorks and Visual Basic - Full range of system conditions - Source code API library included - All detected errors ■ GUI - Optional BusTools/1553 GUI bus analyzer ■ Full error detection ■ LabVIEW - Support optional - Invalid word - Late response ■ LabVIEW Real-Time - Support optional - Bit count error - Early response ■ Solaris - Support optional - High word - No response ������������������� - Low word - Incorrect RT address - Inverted sync - Parity error ■ 1 Mbyte (per dual-redundant channel) - Manchester ����������� ■ Extensive programmable error injection (on a per word basis) ■ Direct or transformer coupling ■ Synchronize BC operation to external time source ■ Input and output triggers �������+������� ■ Jumper selectable front panel 1553 jacks or ■ Multiple RT simulation (up to 31 RTs) J2 backplane I/O ■ Programmable error injection (on a per word basis) �������������������������������� ■ Modify data, status words or setup while card is running ■ Simultaneous BC, 31 RTs and BM ■ Programmable message content (linked message buffers) ■ Interrupts can be generated on a per message basis upon ��� ����������������������������� End of Message and error conditions ■ BC or 31 RTs or BM *���������� ������!������������"�#$%�����������& ■ Capture 100% fully loaded bus traffic with: ■ + 5 VDC: 1.7 A - Time-tagging - Error status ��’��� ����������������� - Word status - Message status - RT response time ■ 5V Signaling ■ Interrupts can be selected by RT/SA/WC (�������)�3 year limited hardware warranty ■ Extensive filtering and triggering options - By individual RT/subaddress - Transmit, receive or broadcast mode codes ��������� � �������������� - Internal or external triggering ������������ MIL-STD-1553 multi-function, single - Trigger output on user specified data channel CompactPCI interface board ■ Real-time bus playback with RT edit mode ������������� MIL-STD-1553 multi-function, two channel ■ 45-bit, microsecond resolution timetagging CompactPCI interface board ■ Host software synchronization to external timing sources ������������ MIL-STD-1553 single-function, single ����������������� channel CompactPCI interface board ������������� MIL-STD-1553 Bus Analysis, Simulation & ������������� MIL-STD-1553 single-function, two Data Logging software for Windows channel CompactPCI interface board (multi-function boards only) ������� LabVIEW and LabVIEW Real-Time support for cPCI-1553 ������� Solaris support for cPCI-1553 *=C for 3U or =F for 6U. A channel is a dual-redundant A/B pair. See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. cPCI-1553 4/06 Tel 805.965.8000 Fax 805.963.9630