GE INTELLIGENT PLATFORMS CP1A-4100Xx

Description
1.4 GHz PowerPC 6U CPCI SBC, Level 4; 512 MB DDR SDRAM, 256 MB Flash, 2x GbE ports, 2x RS-232, 4x RS-232/422/485 ports, 5x USB 2.0 ports, Mouse and Keyboard, 33 bits GPIO, 2x PMC slots
Part Number
CP1A-4100Xx
Price
Request Quote
Manufacturer
GE INTELLIGENT PLATFORMS
Lead Time
Request Quote
Category
Single Board Computers
Specifications
Form Factor
PICMG
Address Modifier
Daughter card offering a range of standard interfaces or the possibility of customer-specific functionality at a fraction of the cost of a whole board redesign
CompactPCI Interface Compliance standards
33/66 MHz 32/64-bit CompactPCI interface is provided from the PCI to PCI bridge. Hot swap is supported (PICMG 2.1)
DIO
Up to 33 bits of TTL compatible discrete digital I/O.
Ethernet
10/100/1000 BaseT. Two ports
Features
256 MBytes Flash
Keyboard/Mouse
PS/2 compatible
Memory
512 MBytes DDR SDRAM with ECC 32 KBytes autostore NVRAM
Parallel
IEEE P1284 compatible
PMC #1
Two PMC sites are supported (one PCI-X capable up to 133 MHz) on separate buses ensuring no loss of performance if running a state of the art and legacy PMC
Processor
PowerPC 7448 at 1.4 GHz
RTC
1 sec. resolution
Serial
RS232, provided from the integrated Southbridge to J4. Also available from front panel micro-D connector (build levels 1-3 only) Async/sync capable, provided from the Discovery III ISC to J4. Both channels are software selectable to be RS232/22 or 485 RS232/RS422 (software selectable) provided from a UART to J4
Software Features, Protocols, and RFCs
Full Radstone software support
System Controller
Marvell ‘Discovery III’
Timer
4 x 32-bit timer / counters
USB
USB 2.0 compatible
Watchdog Timer
Programmable Watchdog in the Discovery ISC and a discrete fixed interval Watchdog timer (1.6 sec. time-out period)
Features
- 2 x Gigabit Ethernet ports (PICMG 2.16 compliant)
- 2 x PMC sites
- 5 x USB2.0 ports
- 6 x serial ports
- AFIX daughter cards
- DDR SDRAM on133MHz memory bus
- Discovery 3 Integrated System Controller
- Extensive Radstone software support
- Fully rugged – air/conduction-cooled
- High performance 6U CompactPCI processor
- PowerPC 7448
Datasheet
Extracted Text
GE Intelligent Platforms CP1A 6U CompactPCI PowerPC Single Board Computer The CP1A 6U CompactPCI single board Features Feature set with AFIX1553 computer (SBC) is the founder member of • Dual channel, dual redundant MIL-STD- • High performance 6U CPCI processor the PowerPact6 family, building on the success 1553B interfaces • Fully rugged – air/conduction cooled of the established PowerPact3 family of 3U • 2x DDC PCI MicroACE • Extensive GE Intelligent Platforms CompactPCI products. • Each channel offers independently software support selectable BC, RT, MT modes The CP1A is based on the proven designs • 64K words of RAM (with parity) per channel of the VME SBCs but takes full advantage • Key features • Transformer-coupled / direct-coupled of the enhanced features of CompactPCI, - PowerPC 7448 such as support for hot swap and much Feature set with AFIX SG - Discovery 3 Integrated System Controller higher I/O pin count. An extensive range In addition to the standard feature set, the of I/O coupled with two PMC sites and AFIX - DDR SDRAM on 133 MHz main AFIX SG offers a combination of SCSI and (Additional Flexible Interface Xtension) memory bus Graphics capabilities. pluggable module make the CP1A the most • 8-bit Ultra SCSI (20 MBs/sec) or 16-bit - 2x Gigabit Ethernet ports versatile single slot solution currently in the Ultra SCSI (40 MBs/sec) (PICMG® 2.16 compliant) defense and aerospace market space. • RGB Analog Graphics (Silicon Motion - 6x serial ports SM722 Graphics Accelerator, with - 5x USB 2.0 ports The PowerPC 7448 processor and Dis- integral 8 MB memory. Resolutions up to covery 3 Integrated System Controller, - 2x PMC sites 1280x1024) combined with industry-leading software - AFIX daughter cards (Note: option with 16-bit Ultra SCSI results in reduced GPIO support and experience in designing and capability from host card - eight lines available) manufacturing rugged electronics for over four decades, give the CP1A the edge in embedded computing performance. Additional Flexible Interface Xtensions (AFIX) For enhanced I/O flexibility the CP1A supports ‘plug-on’ module, which adds rear I/O func- tionality. The Additional Flexible Interface Xtension (AFIX) card is a factory fitted option, providing fully rugged flexibility to the CP1A’s already extensive I/O feature set. Figure 3: CP1A Base Board and AFIX Card Standard Feature Set (without AFIX) • 2x 10/100/1000BaseT Ethernet ports • Keyboard and Mouse • 5x USB 2.0 ports • 17 bits General Purpose I/O from South Bridge (Eight bits capable of generating an interrupt); can be software configured as a parallel port • 16-bits GPIO from PCI bridge • Parallel port • 6x serial ports CP1A 6U CompactPCI PowerPC Single Board Computer Specifications Block Diagram Processor • PowerPC 7448 at up to 1.4 GHz • 1 MB on-chip L2 cache System Controller USB3 • Marvell Discovery III Integrated System Controller COM1 USB4 (ISC) with two PCI-X interfaces COM2 USB5 DDR Temp Flash Main Memory RTC SDRAM 256 MBytes Sensor 512 MBytes • Up to 1 GB DDR SDRAM with ECC • 64-bit data bus running at 133 MHz 7448 Discovery III USB 2 AFIX Flash Memory • 256 MB Flash via a 32-bit data bus at 133 MHz • 16 MB Boot Flash Hot PCI PCI Non-volatile RAM PCI 64 Bit 66 MHz 32 Bit 33 MHz Bridge Bridge Swap • 32 KB AutoStore NVRAM Real-Time Clock GPIO PCI-X 64 to Bit 133 Control PCI • 1 sec resolution South NVRAM J4/J5 MHz & Status UART Bridge Bridge 32 KBytes Ports • 5V standby features alarm interrupts Ethernet Interfaces XD-bus • 2x 10/100/1000BaseT J5 PMC1 PMC2 Serial Ports • 6x RS-232; RS-232/422 or RS-485 66 MHz 64-bit CPCI Keyboard / Mouse • PS/2 compatible J1 J2 J3 J4 J5 USB Ports • 2x USB 2.0 Discrete Digital I/O • Up to 33 bits of TTL-compatible discrete digital I/O • 8 bits capable of generating interrupts Parallel port • 1x Parallel port IEEE P1284 compatible Environmental Level 1 Level 2 Level 3 Level 4 Level 5 Timers Cooling Method Convection Convection Convection Conduction Conduction • 4x 32-bit timer/counters Conformal Coating Optional Standard Standard Standard Standard Watchdog Timer High/Low Temp 0 to 55°C -20 to +65°C -40 to +75°C -40 to +75°C -40 to +85°C • Two available with 1.6 sec time-out Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall DMA Engines 2 2 2 2 2 • 6x DMA controllers Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g/Hz** CompactPCI Shock 20g*** 20g*** 20g*** 40g*** 40g*** • PCI 6254 Bridge *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz ***Peak sawtooth 11 ms duration • 33/66 MHz 32/64-bit CPCI interface from PCI to PCI Bridge. Hot swap is supported (PICMG 2.1) Ordering Information PMC • 2x PMC sites (1x PCI-X capable at 133 MHz) Part Number Description • Full 64-pin rear I/O per site CP1A-1100Xx 1.4 GHz PowerPC 6U CPCI SBC, Level 1; 512 MB DDR SDRAM, 256 MB Flash, 2x GbE ports, AFIX Site 2x RS-232, 4x RS-232/422/485 ports, 5x USB 2.0 ports, Mouse and Keyboard, 33 bits GPIO, • AFIX1553 Dual channel dual redundant MIL-STD- 2x PMC slots 1553 interfaces based on DDC MicroAce • AFIXSG Integrated Silicon Motion SM722 graphics CP1A-2100Xx Air-cooled level 2 as above with conformal coating accelerator with 8 MB on-chip memory, plus 8- or CP1A-3100Xx Air-cooled level 3 as above with conformal coating 16-bit Ultra SCSI CP1A-4100Xx Conduction-cooled level 4 as above Power Consumption CP1A-5100Xx Conduction-cooled level 5 as above • 25W X=software option x = AFIX option (0= No AFIX, 1= AFIX1553 single channel, 2= AFIX1553 dual channel, 3= AFIXSG) JTAG Interface • 1x on-board connector Software • Deployed test strategy (BIT and BCS); VxWorks; LynxOS GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 10.10 GFA-1738 PMC1 ETH2 ETH1 COM3/4 MOUSE KEYBOARD COM1/2 GPIO/PARALLEL GPIO COM5/6 AFIX IO AFIX IO USB1 USB2 PMC2
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the CP1A-4100Xx?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

GE Intelligent Platform A16B-2200-0521 CPU Board - GE FANUC Series 15i - BASE 0 (Serial Spindle), Co...

GE INTELLIGENT PLATFORMS ACC-0602RC-000 CPU Boards - Rear Transition Module (RTM) designed to transi...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods