CL7 ® All -In-One Celeron®/Pentium III 3U CompactPCI® Embedded Computer Features • Two processor options: ® Celeron 566 MHz or ® Pentium III 700–1000 MHz • Low Power Mobile CPUs • Ultra-compact, all-in-one PC in one slot • Multiple operating systems: ® Windows 20000/XP, QNX, ® VxWorks , Linux • SDRAM up to 512 MB • Enhanced IDE interface for Flash drive or local 2.5-in. hard disk • Internal 3.5-in. floppy drive • Optional DVI-D interface for LCD display, front-panel port • PICMG 2.1 Hot Swap- ® CL7 is a CompactPCI all-in-one 3U single board computer designed to meet the compliant needs of embedded applications in such areas as industrial automation, military and • Front-panel PS/2 aerospace, scientific, medical, imaging, and telecommunication (high-bandwidth, keyboard/mouse port broadband data or intelligent network switching). The CL7 supports such operating ® ® ® systems as Windows 2000/XP, QNX, VxWorks and Linux . • VGA Controller that supports up to 1600 x 1200 The ultra-compact all-in-one design offers value and flexibility with multiple processor resolutions and memory configurations, and an impressive array of on-board peripherals including a video interface, and Fast Ethernet. Couple this with customer-specific • 10/100 Mb/s front-panel assembly service and the CL7 provides optimized price vs performance for all types Ethernet port of OEM applications. • IEEE 1284-compliant The CL7 offers rugged options for extreme environments with extended shock and parallel port vibration immunity and extended temperature range tolerance of up to -40°C to • One or two front-panel opto- +70°C. isolated serial I/O ports with Special features include two serial ports (COM1—RS-232, COM2—RS-232 or RS- 16-byte FIFOs, RS-232 or 422), video interface, IDE interface, USB interface, and optional LCD interface. 422 interface • Two front-panel USB ports • Watchdog, temperature sensor • Customer-specific, low cost assembly versions Single Board Computers Specifications EIDE Interface CompactPCI - Intel 82810 • Ultra DMA/66 sync. DMA mode up to 66 Mb/s • 32-bit 33 MHz PCI Controller for up to eight slots • PIO Mode 4 and bus master IDE up to 16 Mb/s • J1 + 2, 2 mm pin and socket connector (IEC-1076-4-101) • Two devices supported through EIDE connector Processor - Socket 370 (FCPGA) or BGA2 Serial I/O Interface - RS-232/RS-422 • Scalable processing power with flexible processor design • Two asynchronous 16550-compatible full-duplex channels • Intel Celeron 566 MHz • High-speed data transfers up to 115.2Kbaud with 16-byte • Intel Pentium III 850 MHz, 1 GHz FIFOs • Intel Mobile Pentium III, 700 MHz • RS-232 or RS-422 (COM1 only) with opto-isolation • High-efficiency on-board switching regulator (DC/DC) • Fanless cooling with heat sink Parallel Port Contact SBS Technologies for price list of latest CPU versions • Bi-directional, IEEE 1284-compatible enhanced parallel port (including EPP and ECP) for printer or general-purpose I/O Performance Winston 99 CPU Frequency Business High End USB Port • Two universal serial bus channels Celeron 566 MHz 22.0 22.0 Mobile Pentium III 700 MHz 25.0 25.0 Pentium III 850 MHz 26.0 26.0 Keyboard and Mouse Port Pentium III 1 GHz 30.4 32.8 • PS/2 compatible (128 MB RAM, 1024 x 768 64 KB color, IBM® DJSA-210) Real-time clock • RTC 146818-compatible, on-board Li-battery Chipset – Intel 82810 • 100 MHz system bus with Pentium III and Mobile Pentium III CMOS RAM • 66 MHz bus with Celeron • 114 bytes non-volatile CMOS RAM • PCI burst mode transfers up to 110 MB/s • 32-bit 33 MHz PCI bus Watchdog • Software controlled reset Cache Level 1 Level 2 Celeron* 32 KB 128 KB (full speed) Temperature Sensor Pentium III* 32 KB 256 KB (full speed) • Local and remote temperature (CPU case) * Values are valid for Mobile processor • Software readable from –65° C to +127° C, 10° increments Memory – PC 100 LED • Two-speed SDRAM • Front-panel LED (red) user programmable • Two DIMM sockets, 64-bit, 64–512 MB Hot Swap Hard Disk or Flash Drive • PICMG 2.1-compliant • Internal 2.5-in. IDE hard disk or 1.8-in. IDE flash drive (up to • Other non-system board insertion and extraction permitted on 512 MB) live system • Interrupt on backplane/ENUM# signal Flash Disk for extended temperature range and higher shock/vibration immunity. Hard disk only with 12 HP and 16 BIOS HP front panels). • AMI BIOS, in-system programmable Flash ROM • CPU, memory and IDE auto-detection/selection VGA and LCD - Intel 82810 • Integrated VGA, Ethernet and SCSI BIOS ROM • 3D/2D Window accelerator with LCD flat panel interface • Password protection, BIOS POST, system and video BIOS • Video DVD MPEG-II support ® shadowing • DVI-D interface (PanelLink ) for TFT displays up to 1024 x • Extensive setup with remappable serial/parallel ports 768 x 24 • Operation without disk and keyboard CRT Resolution Intel 82810 1024 x 768 16M @ 85 Hz Mechanical 1280 x 1024 16M @ 85 Hz • 3U 1-slot (100 x 160 x 20.32 mm) with 4 HP front panel 1600 x 1200 256 @ 75 Hz • 3U 2-slot (100 x 160 x 40.64 mm) with 8 HP front panel • 3U 3-slot (100 x 160 x 60.96 mm) with 12 HP front panel Floppy Drive • 3U 4-slot (100 x 160 x 81.28 mm) with 16 HP front panel • Internal 3.5-in. floppy drive, 1.44 MB and 720 KB (with 16 HP front panel) NOTE: CL7 at backplanes with right-justified system slot occupies one cPCI slot only. Fast Ethernet - AMD 79C973A • 10/100Mb/s Ethernet Controller with PCI local bus DMA Power Requirements • 12 KB FIFOs for Transmit and Receive • +5 V, +3.3 V—required • 10BaseT and 100BaseTX auto-negotiation • ±12 V—not required Front and On-Board I/O with Standard Front Panel (8 HP) Temperature - 4 HP The highest allowable operating temperature depends on Front On-Board Optional processor type, speed, and ambient conditions (airflow) as Function I/O I/O Rear I/O shown in table below. All values are under typical conditions. 10/100BaseTx RJ-45 - No 3 Operating Storage Keybrd/Mse Mini-DIN - Yes Standard1 0° C to +65° C -40° C to +85° C USB (2x) USB (2x) - Yes Extended2 -40° C to +65° C -40° C to +85° C Reset Button - Yes LED LED - Yes 1. 0° C to +50° C with rotating mass storage. VGA HD-15 - Yes 2. Extended not available with rotating mass storage. EIDE Primary - 44-pin, 2.0 mm2 No 3. -40° C to +65° C with rotating mass storage. Floppy - 26-pin, 1.25 mm No COM1 D-09 (1x)1 10-pin (2x) Yes LCD DVI-D1 - No Temperature (8, 12, 16 HP) COM2 D-09 (1x) 10-pin (2x) Yes The highest allowable operating temperature depends on LPT1 - 26-pin No processor type, speed, and ambient conditions (airflow) as Speaker - 2-pin Yes shown in table below. All values are under typical conditions. 3 1. COM1 not available on front panel with LCD piggy option. Operating Storage 2. Primary EIDE connector not available when on-board Standard1 0° C to +70° C -40° C to +85° C flash disk is used. Extended2 -40° C to +70° C -40° C to +85° C 1. 0° C to +50° C with rotating mass storage. Front and On-Board I/O with Standard Front Panel (4 HP) 2. Extended not available with rotating mass storage. Front On-Board Optional 3. -40° C to +65° C with rotating mass storage. Function I/O I/O Rear I/O 10/100BaseTx RJ-45 - No max Tambient Keybrd/Mse Mini-DIN - Yes 70.0 USB (2x) USB (2x) - Yes CL7 Reset Button - Yes 60.0 LED LED - Yes mobPIII700 Cel566 VGA HD-15 - Yes PIII700 EIDE Primary - 44-pin, 2.0mm1 No 50.0 PIII850 PIII1000 Floppy - - No COM1 - - Yes 40.0 COM2 - - Yes Speaker - - Yes 30.0 1. Primary EIDE connector not available when on-board flash disk is used. 09/28/2001 PS 20.0 Airspeed m/s 0.0 1.0 2.0 3.0 4.0 Additional Front I/O Connectors with other Front Panels Function 12 HP 16 HP Operating Storage COM1 D-09 (1x) D-09 (1x) Humidity 5–95% @ 40° C 5–95% @ 40° C LPT1 D-25 (1x) D-25 (1x) Altitude 15,000 ft. (4.5 Km) 40,000 ft. (12 Km) CAN - D-09 (1x)1 Floppy1 - Yes MTBF 2.5 in. HDD2 Yes Yes • Calculations are available in accordance with MIL-HDBK-217 1. Floppy connector not available with on-board floppy drive. Please contact SBS Technologies for latest data. 2. Primary EIDE connector not available with on-board 2.5 in. hard disk flash drive only available with 8 HP front Safety panel. • All PWBs are manufactured with flammability rating of 94-0 V by UL recognized manufacturers. Power Consumption Values in following table assume +5 V supply with 128 MB of system memory, w/o keyboard, hard disk, or other modules. CPU Frequency Idle* Operating** 5.0V 3.3V 5.0V 3.3V Celeron 566 MHz 0.8 A 1.5 A 2.9 A 1.5 A Mob. Pentium. III 700 MHz 0.7 A 1.5 A 2.1 A 1.5 A Pentium III 700 MHz 0.8 A 1.5 A 3.7 A 1.5 A Pentium III 850 MHz 0.9 A 1.5 A 4.4 A 1.5 A Pentium III 1 GHz 1.2 A 1.5 A 5.0 A 1.5 A * Idle measured at DOS Prompt, max. power saving. ** Operating measured at DOS prompt, no power saving. CL7 Block Diagram CL7 CL7 Flash drive Celeron/PIII Multi I/O VGA VGA Socket 370/BGA2 COM1 COM1 USB USB CPU/DRAM PCI/LPC Controller Bridge LAN LAN VGC/LCD COM2 512MB SDRAM Fast KBD/MSE KBD/MSE DIMM Ethernet RESET STATUS RESET STATUS LCD Operating Systems Ordering Information WIN-XPEC Windows XP operating system VXW2-BCL7 VxWorks board support package Hardware Accessories Tornado 2 SC304F Floppy disk 3.5 in., 19 in. box: 3U/4 HP, cable WIN-EXPBE Windows XP Embedded SC306HI10G0 IDE hard disk 3.5 in., >10 GB, 19 in. box: 3U/6 HP, w/cable ZKAAPS2SPLIT Cable for keyboard and mouse on front panel Chassis SCC484TC08CL7 Starter Cage: 19 in., 4U, 84HP card cage, 8x 3U cPCI slots (3U, right); 3 fans, 250 W power supply: +3.3 V/12 V, +5 V/22 A, +12 V/7 A, 5 V/0.3 A, -12 V/0.8 A, EMC, CD-ROM, 3.5 in. floppy drive, >10 GB IDE hard disk, 0° C/+50° C Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Memminger Str. 14 Albuquerque, NM 87110-4316 D-86159 Augsburg, Germany Tel 505.875.0600 Fax 505.875.0400 Tel +49-821-5034-0 Fax +49-821-5034-119 Email info@sbs.com Email aug-info@sbs.com For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2004 SBS Technologies, Inc. 20041118