GE Intelligent Platforms CL11 ® High Performance – 3U Compact PCI Single Slot Dual Core Processor Board Features CL11 is a high-performance, single slot, temperature range starts at -40° C. The ® ® 3U CompactPCI CPU board using the Intel upper temperature depends on the selected • Intel Core 2 Duo processor, 1.5 GHz Core Duo or the Intel Core 2 Duo Proces- processor type and available air flow in the ® ® • Intel Core Duo processor 1.2, 1.66 sor. It incorporates sophisticated power system. For example, the 1.06GHz ULV Cel- and 2.16 GHz management technology, eliminating the eron M 423 processor is able to achieve a • Up to 4 MByte L2 cache need for an onboard fan. The CL11 can be maximum temperature of 85° C with 3m/s ordered as a system or non-system slot airflow. Custom specific versions are avail- • Ultra compact all-in-one PC single board computer. able on request. • Single slot • System or non-system (peripheral mode) CompactFlash is available as an option. The CL11 is a powerful processor platform • System slot for 32-bit CompactPCI for a wide range of applications and markets The CL11 supports two Gigabit Ethernets, backplane such as multimedia, automation, transporta- up to 2 GByte of DDR2 SDRAM and VGA. At tion, as well as imaging, medical, robotics, • Up to 2 GByte DDR2 SDRAM the core of the CL11 design is a high-band- and many others. The CL11 is very suited to • Optional Flash drive width bus between the processor, and the low-power embedded computer applica- • VGA interface chipset is running with a FSB of up to 667 tions in a small form factor where optimal MHz. The chipset-to-memory bus supports performance and functionality is required. • Dual Gigabit Ethernet 667 MHz (PC2-5300) DDR2 SDRAMs. In addi- • Enhanced IDE UDMA-100 tion there are six USB 2.0 ports, one serial The CL11 is RoHS compliant. • 2x Serial ATA channel, and two serial ATA channels. Inter- For additional functionality, refer to the CL11’s • 1x serial I/O with FIFOs, RS-232 interface faces are available as front- and/or rear-I/O. sister product, CC11. The CC11 is a 3U Com- The CL11 standard temperature range is • 6x USB 2.0 pactPCI dual slot dual core processor board. from 0° C to +50° C. The optional extended • Watchdog, temperature sensor • 5 V / 3.3 V supply • Optional -40° C to +85° C • Custom specific versions • RoHS compliant ® CL11 High Performance – 3U Compact PCI Single Slot Dual Core Processor Board USB 2.0 SATA 1 / 2 Yes Specifications • Six USB 2.0 connectors. Two on front, three on rear I/O COM 1 Yes Processor - µFCBGA, Low Power Design and one onboard • Scaleable processing power with flexible GPIO (8 pins) Yes Keyboard processor design • Via USB (supports legacy keyboard/mouse SW) Power button Button Reset • Intel Core Duo processor U2500: 1.20 GHz Yes • Intel Core Duo processor L2400: 1.66 GHz Mouse • Intel Core Duo processor T7400: 2.16 GHz • Via USB (supports legacy keyboard/mouse SW) Speaker Yes • Intel Core 2 Duo processor L7400: 1.5 GHz Real-time Clock LED Yes • High efficiency on-board switching regulator (DC/DC) • Integrated in chipset • Fanless cooling with heat sink Keyboard, • RTC 146818 compatible, on-board Li-battery * Contact factory for latest CPU versions Mouse, Floppy Via USB Via USB CMOS RAM Cache level 1 level 2e • 114 bytes non-volatile CMOS RAM for BIOS data 1 * CompactFlash adapter with special extension card possible Core Duo 32 KByte 2 MByte, full speed EEPROM 2 * Front- or Rear-IO as a solder option • 512 Kbit (64 KByte) serial EEPROM for non-volatile Core 2 Duo 32 KByte 4 MByte, full speed user data Power Requirements Floppy • +5 V, +3.3 V Required Chipset – Intel 945GM with Intel ICH7R • Via USB port • 533/667 MHz system bus to processor Power Consumption - typical operating current (est) • One PCI Express x4 interface Watchdog • TBD • Two PCI Express x1 interfaces • Integrated in chipset Mechanical – PICMG 2.0 • Data throughput between 945GM and ICH7R is • Two-stage watchdog with independent count values • 3U, 1 slot wide (100 x 160 x 20.32 mm) with front panel theoretically 2 GByte/s (1 GByte/s each direction) • First stage drives NMI or SMI, second stage drives reset Temperature • Configurable granularity from 1 μs to 10 min Memory – DDR2 667 • Note: For detailed information about the operating • Single-/dual-channel DDR2 SDRAM Timer temperature behavior of the board it is absolutely • High-speed 667 MHz (PC2 5300) DDR2 SDRAM • Integrated in chipset based on 82C59 necessary to consult the manual. The highest achiev- • 64-bits wide/128-bits wide • Includes three timer comparators able operating temperature depends on processor • 512 MByte to 2 GByte with soldered chips • One-shot and periodic interrupts supported type, speed, ambient conditions (air flow) and front plate width. CompactPCI Temperature Sensor • All values under typical conditions. • PICMG 2.0 R3.0 compliant CPCI 32 bit/66 MHz • CPU die and heat sink temperature software readable local bus standard Operating Storage from –65° C to +127° C • Backplane with rear I/O * LED Standard 0° C to +50° C –40° C to +85° C • System or non-system (peripheral) PCI Bridge • Two LEDs at front panel ** Pericom PI7C9X110 for up to 7 slots Extended –40° C to +85° C –40° C to +85° C • J1+2, 2 mm pin and socket connectors (IEC-1076-4-101) BIOS Features * Consult the manual for the required airflow and other basic • New AMI BIOS Core 8, in-system programmable conditions. Gigabit – Two Realtek RTL8111B Flash ROM • Highly integrated single Gigabit Ethernet controller ** The maximum achievable temperature is a function of the se- • Automatic system configuration with PCI Express x1 interface lected CPU version, air flow, altitude, etc. Not every processor • Integrated VGA, SATA RAID and Ethernet PXE ROM is able to achieve this maximum temperature. Please consult • 64 KB transmit and receive FIFO the manual for detailed information. • USB mass storage support • 10/100/1000BaseT auto-negotiation • Password protection • Port 1 and Port 2 for front or rear I/O. Solder option. Humidity • Headless support Flash Drive • Operating: 5% – 95% @ 40° C • Remote console through serial port • EIDE interface on header connector • Storage: 5% – 95% @ 40° C Software • Extension board with one CompactFlash connector Altitude • The following software is supported to the extent VGA and LCD - Chipset Integrated • Operating: 15.000 ft. (4.5 km) listed below. • 2D & 3D graphics engine • Storage: 40.000 ft. (12 km) OS On Request Available • DirectX 9.1 support Shock (3 axis, up & down, 5 hits/direction) • Up to 64 MB of dynamic video memory allocation WIN XP - √ • Styles 1, 3: 12 g /6 ms • Integrated 360 MHz 24-bit RAMDAC for analog VGA QNX 6 √ - Vibration (60 minutes each axis) monitors up to 1600 x 1200, 75 Hz • Styles 1, 3: 2 g rms @ 5 to 100 Hz • Display image rotation VxWorks - √ • Graphics power management VITA 47 Lynx OS √ - • VGA at front or rear I/O • Designed to meet VITA47 class EAC1 and EAC3 EIDE Linux √- √ MTBF • Ultra ATA/100 sync. DMA mode up to 90 MByte/s Front and Onboard I/O with Standard Front Panel • Calculations are available in accordance with • PIO mode 4 and bus master IDE up to 16 MByte/s MIL-HDBK-217. Function Single Board Computer CC11 • Onboard devices supported via local header Please contact GE Intelligent Platforms. Front Onboard Rear SATA Safety I/O I/O I/O • Two serial ATA at rear I/O • Designed to meet standard UL1590, CE Class A, FCC-A • DMA mode up to 150 MByte/s *2 *2 Gb Ethernet 0 RJ-45 Yes Serial I/O - RS232 *2 *2 Gb Ethernet 1 RJ-45 Yes • Integrated in SMSC SCH3112 Super I/O • One asynchronous 16550 compatible full duplex USB 0 USB serial channel USB 1 USB • High-speed transfer up to 115.2 Kbaud with 16 byte FIFOs USB 2 to 4 Yes • COM1 available at rear I/O USB 5 Misc. Header 2 General Purpose Input/Outputs VGA D-15 Yes • Integrated in SMSC SCH3112 Super I/O • 8 bits programmable general purpose inputs/outputs *1 EIDE Misc. Header 1 ® CL11 High Performance – 3U Compact PCI Single Slot Dual Core Processor Board Block Diagram Intel Core 2 Duo Processor Intel 945GM VGA 2 GByte DDR 2 VGA/LCD SDRAM 2 Gbyte/s PCI-E 1x EIDE GbE Controller 1x GbE Intel (x1) ICH7R PCI-E 1x GbE GbE Controller 2x SATA (x1) PCI-E CPCI Bridge (x1) 6x USB Watchdog 1x COM Timer LPC Super I/O RTC SMB 8x GPI/O Ordering Information Hardware Accessories CTM18A01 I/O transition module for 3U backplane SCC484TB05CL11R Starter cage 19" 4U, 5 slots, with fans, power supply, DVD, hard disk, transition module, 0° C to +40° C Operating Systems Extensive operating systems support is available, (see page 3 of this document). Chassis with power supplies, backplanes and drives on request. For detailed information and further options, contact GE Intelligent Platforms. Software CL11-SDK-Linux System Development Kit for CC11/CL11 Linux CC11-BSP-VXW VxWorks 6.6 Board Support Package for CC11/CL11 CL11-SDK-XP System development Kit for CC11/CL11 for Windows XP and XP Embedded About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2011 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 05.11 GFA-997A