CC7 CC7 CC7 CC7 ® All-In-One Celeron™/Pentium III PC 3U CompactPCI Embedded Computer Features  Celeron™, 566 MHz ®  Pentium III, 500-850 MHz  Low Power Mobile CPUs  Ultra compact all-in-one PC  Occupies 2 CPCI slots only with Front and Rear I/O  Embedded NT, Windows 2000/ NT/ 98, QNX, VxWorks, Lynx, Linux, MS-DOS  Up to 512 MB SDRAM w/ ECC  1.8” FlashDrive up to 512 MB  VGA/LCD up to 1600x1200 4(2) MB high speed SDRAM  Fast Ethernet 10/100 MBit  SCSI up to 20 MB/sec  PCIbus enhanced IDE The CC7 CompactPCI all-in-one 3U with a custom specific assembly single board computer is designed to service provides optimized price /  CANbus for low cost I/O meet the needs of embedded performance for all kinds of OEM  4x serial I/O with FIFOs application developers addressing applications. RS-232 or RS-422 interface markets like industrial automation,  2x IEEE 1284 parallel ports medical, scientific, imaging, test and Rugged needs are addressed with  2x USB measurement, and telecommunication. increased shock and vibration  Watchdog, NMI ticker, Supported operating systems are immunity of the compact 3U design, temperature sensor Windows 2000/ NT/ 98, QNX, an extended temperature range of up VxWorks, Lynx, Linux, MS-DOS and to –40°C to +70°C, and features like  Single +5 volt supply only others. LCD interface.  Optional –40°/+70°C The ultra compact all-in-one concept Special features include four serial  Custom specific, low cost with flexible processor and RAM channels with flexible RS-232 or RS- assembly versions configurations, front and rear I/O and 422 interfacing, a CANbus device for an impressive array of on-board low cost I/O and single +5V supply. peripherals includes video interface, Ethernet and SCSI. This combined CC7 CC7 CC7 CC7 ® All-In-One Celeron™/Pentium III PC 3U CompactPCI Embedded Computer Block Diagram and Front Panel I/O Specifications CompactPCI - Intel 21150 Chipset - Intel 82443BX, 82371EB ® ® 32-bit PCI-to-PCI bridge for up to 8 slots (33 MHz) 100 MHz system bus with Pentium III and Mobile Pentium III J1+2, 2 mm pin and socket connectors (IEC-1076-4-101) 66 MHz system bus with Celeron™ PCI burst mode transfers faster than 110 Mbytes/sec Processor - Slot 1-Adapter for Socket 370 and BGA2 32-bit wide PCIbus (33 MHz) Scaleable processing power with flexible processor design ® Intel Celeron™: 566 MHz, Intel Pentium III: 850 MHz Cache level 1 level 2 ® *1 Intel Mobile Pentium III: 500MHz, 700 MHz Celeron™ 32 KB 128 KB, full speed ® *1 Please see price list for latest CPU versions Pentium III 32 KB 256 KB, full speed *1 High efficiency on-board switching regulator (DC/DC) also valid for Mobile processor Fanless cooling with heatsink Memory - PC66/100 Performance Winstone 99 2 DIMM sockets for 64 to 512 Mbytes, 64-bit CPU Frequency Business High End Optional with error correction (ECC) Celeron 566 MHz 21.1 31.8 Mobile Pentium III 500 MHz 22.9 34.4 FlashDrive Mobile Pentium III 700 MHz 24.9 41.0 Internal 1.8” IDE FlashDrive (up to 512 MB) for extended Pentium III 850 MHz 25.8 44.3 temperature range and higher shock/vibration immunity (128 MB RAM, 1024x768 64K color, ST34502LW HD) CC7 CC7 CC7 CC7 ® All-In-One Celeron™/Pentium III PC 3U CompactPCI Embedded Computer VGA and LCD – CT 69030/69000 BIOS Features 64-bit Windows accelerator and LCD flat panel interface AMI BIOS, in-system programmable Flash ROM On-chip high speed 4/2 Mbytes synchronous DRAM (83 MHz) CPU, memory and IDE auto-detection/selection Flexible 9, 12, 15, 18 or 24-bit panel TFT interface Integrated VGA, Ethernet and SCSI BIOS ROM Password protection, BIOS post, system and video BIOS shadowing CRT Resolution CT 69030 CT 69000 Extensive setup with remappable serial/parallel ports Diskless, keyboardless and videoless operation 1024x768 16M@100Hz 64K@100 Hz 1280x1024 16M@75Hz 256@75 Hz Front and Rear I/O (with transition module CTM6) 1600x1200 64K@60 Hz - The pinouts of the transition module connectors (rear I/O) corresponds to standard PC connectors (press-fit cables). Fast Ethernet - AMD 79C972 10/100 Mbits/sec controller with PCI local bus DMA Function Front I/O Rear I/O 12 Kbytes FIFO buffers for Receive and Transmit 10BaseT and 100BaseTX auto-negotiation interface VGA HD-15 10-pin 10/100BaseTX RJ-45 - *1 SCSI - SYM 53C860 Multi-I/O - 26-pin SCSI controller with PCI local bus DMA Keyboard mini-DIN - SCSI transfer speed up to 20 Mbytes/sec Mouse mini-DIN - Active low power termination on-board USB 1+2 1x USB - Reset switch - EIDE Speaker on-board - Ultra DMA/33 sync. DMA mode up to 33 Mbytes/sec LED red LED - PIO mode 4 and bus master IDE up to 16 Mbytes/sec CAN - - 3 devices supported via local EIDE connector and rear I/O Watchdog - - *2 EIDE primary - 44-pin, 2.0 mm CAN - Intel 82527 COM 1+2 2x D-09 2x 10-pin Device supports CAN specification 2.0 COM 3+4 - 2x 10-pin Opto-isolated (500VDC) high speed ISO 11898 interface LPT 1 D-25 26-pin LPT 2 - 26-pin 4x Serial I/O - RS-232/422 LCD - 40-pin Four async. 16550 compatible full duplex serial channels SCSI - 50-pin High-speed transfer up to 115.2 kbaud with 16 byte FIFOs Floppy - 26-pin, 1.25 mm *1 COM 1+2: RS-232 or RS-422 interface Multi-I/O connector with Keyboard, Mouse, 2x USB, Reset, COM 3+4: RS-232 or RS-422 interface Watchdog, LED, CAN and Speaker *2 Secondary EIDE with additional 44-pin connector for 1.8” 2x Parallel Port FlashDrive on-board Two bi-directional, IEEE 1284 compatible enhanced parallel ports (including EPP and ECP) for printer or general purpose I/O Floppy One channel 3.5“ floppy drive controller 720 KB and 1.44 MB 2x USB Two 12 Mbits/sec universal serial bus channels Keyboard PS/2 compatible Mouse PS/2 compatible Real-time clock RTC 146818 compatible, on-board Li-battery CMOS RAM 114 bytes non-volatile CMOS RAM EEPROM 4 kbit serial EEPROM for non volatile user data Watchdog Activates reset under software control (550 ms) Temp. Sensor Local temperature SW readable from –55°C to +125°C, 0.5°C increments NMI-Ticker User programmable NMI timer 0.3 to 18 ms for real-time applications Speaker Internal speaker (1.0 kHz to 4.2 kHz) LED Front panel LED (red) user programmable Hot-Swap - compliant to PICMG CompactPCI 2.1 Other, non system boards can be removed or added with power on. Access to or interrupt on backplane /ENUM signal supported. CC7 CC7 CC7 CC7 ® All-In-One Celeron™/Pentium III PC 3U CompactPCI Embedded Computer Power Requirements Temperature +5 V Required Highest reachable operating temperature depends on processor +3.3V, �12V Not required type, speed and ambient conditions (airflow) as shown below. All values under typical conditions. Power Consumption - +5 volt, typical current Operating Storage 128 MB memory, w/o keyboard, hard disk, modules, etc. Standard 0°C to +70°C –40°C to +85°C CPU Frequency Idle Extended –40°C to +70°C –40°C to +85°C Operating max Tambient 70,0 CC7 Celeron™ 566 MHz 1.4 A 3.1 A ® Mobile Pentium III 500 MHz 1.3 A 2.4 A ® Mobile Pentium III 700 MHz 1.3 A 2.8 A 60,0 mobPIII500 ® mobPIII700 Pentium III 850 MHz 1.5 A 4.6 A Cel566 PIII850 Idle measured at DOS prompt, max. powersaving 50,0 Operating measured at DOS prompt, no powersaving 40,0 Mechanical 3U, 3 slot wide (100 x 160 x 60 mm) including FlashDrive 30,0 Occupies 2 slots on CPCI backplane Airspeed m/s 0,01,0 2,03,0 4,05,0 6,0 Rear I/O on left side of system slot via I/O transition module Operating Storage Humidity 5 - 90% @ 40°C 5 - 95% @ 40°C Altitude 15.000 ft. (4.5 km) 40.000 ft. (12 km) MTBF Calculations are available in accordance with MIL-HDBK-217. Please contact factory. Safety All PWBs are manufactured with flammability rating of 94V-0 by UL recognized manufacturers CC7 CC7 CC7 CC7 ® All-In-One Celeron™/Pentium III PC 3U CompactPCI Embedded Computer Ordering Information For detailed information call factory Hardware Accessories CANopen Software CPC-R422C2 RS-422 driver for COM1 + COM2 WNT-CAN CANopen master SW for Windows-NT CTM6 I/O transition module DOS-CAN CANopen master SW for MS-DOS CT-IDE IDE transition module 2.0 mm -> 2.54 mm VXW-CAN CANopen master SW for VxWorks CBUS-IO Carrier for transition module (male-male) QNX-CANIO CAN I/O library for QNX SC304F Floppy disk 3.5 inch, 19“-box: 3U/4HP, cable SC306HI10G0 IDE hard disk 3.5“, 10 GB, 19“box: 3U/6HP, Chassis cbl. SCC484TC08CC7 "StarterCage: 19"", 4U, 84TE card cage, 8x YLBSCSI304A Flatcable for external SCSI drive, 60 cm, 3U CPCI slots (3U, left); 3x fan, 235W power 3U/4HP front panel, 50-pin Centronics conn. supply, EMC, 1x CBUS-IO, CD-ROM, 3.5"" YLBCOM304A Flatcable for 2x COM, 3U/4HP frontpanel floppy drive, 10 GB IDE hard disk, I/O transition module (CTM6) with frontpanel Operating Systems (YLBCOM304A), 0°C/+50°C" DOS-MD600x MS-DOS operating system WIN-98xC Windows 98 operating system Special chassis, supplies, backplanes and drives on request. WIN-NT4xC Windows NT 4.x operating system WIN-2000xC Windows 2000 operating system QNX-11252 QNX4 operating system QNX-11294 QNX4, Photon microGUI VXW-BCX7 VxWorks board support package Tornado 1 (w/o SCSI driver) VXW2-BCX7 VxWorks board support package Tornado 2 WIN-ENT4xE Windows Embedded NT 4.x SBS or Industrial Computers GmbH&Co. KG USA and Canada: 6301 Chapel Memminger Str. 14, D-86159 Augsburg Hill Road, Raleigh, NC 27607-5115 Tel +49 (821) 5034-0, Fax -119 Tel (919) 851-1101, Fax -2844 E-mail sales@sbs-or.de E-mail sales@sbs-ec.com Internet www.sbs.com Internet www.sbs.com Specifications subject to change without notice. Third party brands and names are property of their owners. Rev. 06/29/2001