PrPMC800 Series High-Performance Processor PMC Front page The Emerson PrPMC800 series processor PCI mezzanine card (PMC) is the ideal The Emerson PrPMC800 solution when time-to-market and flexibility are important. In addition to the series processor PCI highlighted features, this PMC module also includes a full-length heatsink, creating mezzanine card (PMC) is a CPU package capable of handling the thermal requirements of complex tasks. the ideal solution when time-to-market and flexibil- Processor PMC (PrPMC) modules provide a complete host CPU and memory subsys- Interior page ity are important. tem to a base board full of PCI-based I/O controllers in a compact, rugged, industry standard form factor. The PrPMC isolates the complexities of a high-speed CPU, cache ® and memory signals from application-specific hardware, enabling OEMs to focus ° MPC7410 PowerPC on their market requirements while simplifying their product release. These modules microprocessor also simplify CPU and memory upgrades in performance-driven embedded and ° AltiVec technology telecom applications. ° Latest high-performance PowerPlus III Architecture ° 2MB/1MB of L2 cache ° Up to 512MB on-board ECC SDRAM ° 32MB on-board flash ° 72-bit ECC memory controller ASIC ° Single-wide PMC with a 66/33 MHz PCI interface ° Optional 10/100BaseT Ethernet interface ° 64-bit PCI host bridge ° One asynchronous serial debug port ° Hardware DMA channel ° Four 32-bit timers ° Two watchdog timers Front page Interior page PrPMC800 Block Diagram EIA232 Planar Flash 32MB 2 I C Serial L2 Cache MPC7410 COM1 2/1MB processor EEPROM PCI Bridge and ECC DRAM Memory Controller Up to 512MB PowerPC Bus – A32/D64-bit Ethernet 64 Base Board Pn4 Pn2 10/100 Base T Pn3 Pn1 PCI Bus – A32/D64-bit PMC Interface to 66/33 MHz Base Board Specifications SyNCHroNoUS SErIAL PorT ° Controller: 16C550 compatible ProCESSor ° Number of Ports: One ° Microprocessor: MPC7410 class ° Configuration: DTE ° Clock Frequency: 400 – 500 MHz ° Async Baud Rate, b/s max.: 38.4K EIA-232, ° On-chip Cache (I/D): 32KB/32KB 115Kb/s raw ° L2 Cache: 1MB – 2MB ° Cache Bus Clock Frequency: 180 MHz – 225 MHz IEEE P1386.1 INTErFACE ° Address/Data: A32/D32/D64, PMC Pn1, Pn2, Pn3, MEMory Pn4 connectors ° ECC Protected Main Memory: PC100 SDRAM ° PCI Bus Clock: 33 MHz or 66/33 MHz capable ° On-board Capacity: Up to 512MB ° Signaling: 3.3V output; VIO input ° Single Cycle Accesses: 10 read/5 write ° Power: +3.3V ° Read Burst Mode: 8-1-1-1 idle; 3-1-1-1 aligned ° Height: 13.5 mm from top of carrier board page hit (CL3) (one slot) ° Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned ° Module Type: Single-wide page hit 2 ° User I C Serial EEPROM: 8KB ETHErNET ® ° EEPROM/Flash: 32MB surface mount (on-board ° Controller: Intel 82559ER/82551IT programmable), up to 512MB addressable on ° PCI Bus Master: 33 MHz with PCI burst carrier (optional) ° Connector: Models configured for Ethernet routing via Pn4 do not have a front bezel. 2 Front page Interior page CoUNTErS/TIMErS ENVIroNMENTAL ° Real-Time Timers/Counters: Four 32-bit Operating Non-operating programmable Temperature: 0° C to +55° C, forced air ° Watchdog Timers: Two, time-out generates cooling interrupt or reset Humidity (NC): 5% to 85% 5% to 95% MISCELLANEoUS Vibration: 1.0 G sine 0.5 G sine sweep; ° Reset, Abort and JTAG/COP via on-board debug sweep, 5.0 50-500 Hz; 0.1 connector to 100 Hz, 25 octaves/min 3.0 G octaves/min sine sweep; 5-50 Hz; ° Two planar LEDs for Fail and CPU active 0.25 octaves/min PowEr rEqUIrEMENTS ELECTroMAgNETIC CoMPATIBILITy (EMC) (AltiVec disabled) ° Intended for use in systems meeting the following + 3.3V ± 5% @ 20° C regulations: PrPMC8005E-12xx: 3.3 A typical, 3.9 A Å U.S.: FCC Part 15, Subpart B, Class A (non-residen- maximum tial) PrPMC8005E-13xx: 4.1 A typical, 4.5 A Å Canada: ICES-003, Class A (non-residential) maximum ° This product was tested in a representative system to the following standards: VIO: PCI buffer diode clamping voltage Å CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN50082-1 DEMoNSTrATED MTBF (based on a sample of eight boards in accelerated stress environment.) ° Mean: 190,509 hours ° 95% Confidence: 107,681 hours SAFETy All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. 3 Front page Interior page Ordering Information Part Number Description 33 MHz PCI, Front Ethernet PRPMC8005E-1261 450 MHz MPC7410, 256MB ECC SDRAM 33 MHz PCI, Rear Ethernet PRPMC8005E-1259 450 MHz MPC7410, 128MB ECC SDRAM PRPMC8005E-1269 450 MHz MPC7410, 256MB ECC SDRAM 66 MHz PCI, No Ethernet PRPMC8005E-2261 450 MHz MPC7410, 256MB ECC SDRAM PRPMC8005E-2271 450 MHz MPC7410, 512MB ECC SDRAM Note: Additional PrPMC800 series models may be available; contact your local sales representative. Documentation PPMC800A/IH PrPMC800 Installation and Use manual PPMC800A/PG PrPMC800 Programmer’s Reference Guide SoLUTIoN SErVICES Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. Plus solution extras include enhanced warranty and repairs. PowerPC is a trademark of IBM Corp. and used under license. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling DC Power Systems Outside Plant Site Monitoring ™ Business-Critical Continuity . Embedded Computing Power Switching & Control Surge & Signal Protection Business-Critical Continuity, Emerson Network Power and Emerson Network Power the Emerson Network Power logo are trademarks and Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Madison, WI U.S.A. 1 800 356 9602 or +1 608 831 5500 service marks of Emerson Electric Co. Shanghai, China +86 215292 5693 Paris, France +33 1 69 35 77 00 Tokyo, Japan +81 3 5424 3101 ©2008 Emerson Electric Co. Munich, Germany +49 (0) 89 9 608 2 333 Hong Kong, China +852 2966 3210 Tel Aviv, Israel +972 3 568 4387 www.EmersonNetworkPower.com/EmbeddedComputing PrPMC800-D1 2/08