Embedded Computing for ™ Business-Critical Continuity Pm8560 PMC Modules ProcessorPMC module with The Pm8560 is a Processor PCI Mezzanine Card (ProcessorPMC) module with up to up to 8 E1/T1/J1 interfaces 8 E1/T1/J1 interfaces. The Pm8560 is ideal for 3G (UTMS & W-CDMA) and 2.5G (GPRS) data and signaling ■ applications. The module is capable of supporting a wide variety of protocols Processor PMC (VITA32-2003) including SS7 and SIGTRAN. Other applications include signaling gateways and with up to 8 software selec- softswitches as a signaling interface card. table E1/T1/J1 interfaces ■ Freescale Semiconductor The Pm8560 includes a reduced media-independent interface (RMII) on Pn3 for MPC8560 PowerQUICC III Ethernet PHYs and management interface. communication processor ■ Up to 512MB Double Data Physical connectivity of E1/T1/J1 spans the Pm8560 via rear transition modules Rate SDRAM with ECC (RTMs) that interface from either 2.16/cPSB blades or AdvancedTCA blades such as Emerson’s Katana product line. ■ Up to 32MB Flash ■ PCI bus operation of 32-bit/66 MHz ■ 10/100/1000 Ethernet port ■ Optional CTbus clock support ■ Optional rear transition mod- ule for ATCA or 2.16/cPSB blades supporting E1/T1/J1 interfaces ■ RoHS/WEEE compliant configuration available ■ Quality assured by over 30 years of design experience and a TL-9000 and ISO 9001:2000 certified quality management system. (FM 26789) ISO 9001:2000 FM 26789 Embedded Computing for Pm8560 ™ Business-Critical Continuity PMC Modules SpiderSIGTRAN M2UA, M3UA COMMUNICATION COMMUNICATIONS OPTIONAL REAR REGULATORY COMPIANCE and SCTP (professional serv- INTERFACES PROCESSOR TRANSITION MODULE (RTM) ices may be required for port- ■ ■ T1/E1/J1 Freescale PowerQUICC III cPCI/cPSB (PICMG 2.16) FCC Part 15 (US) ing/configuration) formfactor MPC8560 ■ ■ ICES-003 (Canada) Up to 8 channelized E1 or ▲ ■ Supports up to 2 Pm8560 T1/J1 spans 800 MHz PowerPC™ Book E ■ IEC/UL/CSA 60950 PHYSICAL CHARACTERISTICS core operation modules on a cPCI/cPSB ■ Supports T1/CEPT and ■ NEBs: Telcordia baseboard (such as the other user-defined proto- ■ 266MHz when core is ■ Board format ■ EN55022 Emerson Katana750 or cols (customer provided 800MHz MHz RISC-based ▲ Length: 149.0 mm (5.87") ■ Katana752i) EN55024 software may be required) Communications Processor ▲ Width: 74.0 mm (2.91") ▲ ■ Module (CPM) 8 RJ-45 connectors sup- EN300386 ■ Automatically performs effi- ■ porting 8 E1/T1/J1 ports Baseboard and module fit in a ■ cient packing Communications functions OPERATING SYSTEM from a single Pm8560 or 8 single cPCI/cPSB or ATCA slot ■ ▲ Rear (PMC P14) E1/T1/J1 I/O PCI bus interface RJ-45 connectors support- SUPPORT ■ Power requirements: +3 & ■ ▲ Optional cPCI/2.16/cPSB or Ethernet controller ing 16 E1/T1/J1 ports from ■ +5 VDC @ 11.5W typical Linux Support Package (LSP) ATCA transition module ▲ UART controller using SCC 2 Pm8560 modules for Monta Vista Carrier ■ Operating range: 0° to 55° available for rear I/O appli- (requires breakout cables) ▲ TDM ports for eight Grade Edition (CGE) 3.1 C, 5-95% relative humidity cations supporting 16 ports ▲ 100 ohms T1/J1 balanced T1/E1/J1 spans using MCC (non-condensing) per system blade interface ▲ ATM support via Inverse PROTOCOL SUPPORT ■ Specifications ■ Surge protection for ▲ 120 ohms E1 balanced Multiplexing for ATM (IMA) ▲ E1/T1/J1 ports on passive IEEE 1386.1 CMC/PMC interface ■ ■ System functions Optional SpiderSS7 layers transition module ▲ VITA 32 ProcessorPMC ▲ T1/E1/J1 transformers with MTP1, MTP2 and MTP3, and ▲ DDR SDRAM controller Ethernet isolation and surge protec- ▲ General purpose I/O ■ RMII through P13 connector tion for every signal (GPIO) Serial P Serial Port ort Ethernet Ethernet Reset Reset ■ 10/100/1000 BaseT Ethernet ▲ RJ-45 connectors support- L L Front ▲ Mini- Mini- E E RJ45 RJ45 DMA Switch Switch with front panel access D D x4 x4 ing console / debug ports Pa USB USB nel s s 2 ▲ I C controller from each Pm8560 module PTMC ■ ■ ATCA formfactor Subset of PTMC DEVELOPMENT MEZZANINE Configuration 2 ▲ Supports up to 4 Pm8560 CARD ■ modules on an ATCA base- 10/100/ Power Development Serial Tx/Rx Magnetics LEDs Monitor 1000 PHY Mezzanine Card ■ board (Such as the Optional plug-on card (side ■ (DMC) RMII Emerson KatanaQp) 2) to speed development ■ RMII PHY Management I/F ▲ LEDs (4) Support for up to 32 ■ EIA-232 debug serial port with ■ CT bus clocks E1/T1/J1 ports with 4 CPLD Header cable to DB-9 connector LOGIC Serial EEPROM Reset Control Other Jumpers Pm8560s. TTIP, TRING, ■ Chip Selects JTAG header for PLD pro- Serial Registers ■ RTIP and RRING are routed COP Header EIA-232 serial console port EEPROM gramming Clock Control from Zone 3 connector accessible via front panel or ■ RTC JTAG/COP header for soft- ROM Socket through transformers and P14 connector 8560 Clock ware development surge protection out the Recovery Config ROM ■ 2 Four software-readable con- rear I/O faceplate I C Flash figuration jumpers MEMORY ▲ 100 ohms T1/J1 balanced 16/32MB ■ 32-pin PLCC 8-bit socket for interface E1/T1/J1 ■ Up to 512 Mbytes Double software development MPC8560 ▲ 120 ohms E1 balanced Transceiver Data Rate SDRAM PowerQuicc III ■ 2 user-programmable LEDs interface RMII ■ Processor Up to 32 Mbytes Flash EIA-232 ■ Single connector attached ▲ T1/E1/J1 transformers with Serial memory to PTMC module isolation and surge protec- PCI ■ Flash Architecture NOR tion for every signal DDR ▲ Micro-D connectors sup- 256/512MB port serial I/O from Serial EEPROM Pm8560(s) P11 P13 ▲ Operating range: 0° to 55° JTAG C, 5-95% relative humidity (non-condensing) P12 P14 Serial AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling ™ DC Power Systems Outside Plant Site Monitoring Business-Critical Continuity . Embedded Computing Power Switching & Controls Surge & Signal Protection Emerson Network Power, Embedded Computing Business-Critical Continuity, Emerson Network Power and the ■ 8310 Excelsior Drive Madison, WI 53717-1935 USA Emerson Network Power logo are trademarks and ■ ■ service marks of Emerson Electric Co. US Toll Free: 1-800-356-9602 Voice: +1-608-831-5500 FAX: +1-608-831-4249 ©2006 Emerson Electric Co. Email: info@artesyncp.com 7/06 www.artesyncp.com Local Bus Line Interface CT Clocks DMC Connector