Pm8540 PMC Module Front page For customers in the wireless and convergence market, that need a cost effective Processor PMC module and high performance control subsystem, the Pm8540 from Emerson Network with Freescale 8540 Power provides a highly integrated processor and I/O to meet their system and blade PowerQUICC III integrated control requirements. processor Furthermore, the Pm8540 Processor PCI Mezzanine Card (Processor PMC) is designed Interior page ° VITA32 Processor PMC for hardened telecom applications with Carrier Grade Linux support and long service life of 15 years. ° Freescale 8540 PowerQUICC III integrated processor Using an off-the-shelf processor subsystem saves you time-to-market by allowing ° 256 or 512MB DDR DRAM you to focus your engineering efforts on the key value-add portions of the system ° 32MB flash without spending time and effort on the processor design and testing. A modular processor subsystem also lowers your lifetime cost of ownership by providing an easy ° 16MB persistent memory upgrade path, and protecting you from obsolescence issues. ° Dual 10/100/1000 Ethernet ports with P14 access Considerable engineering effort has gone into ensuring maximum flexibility on the ° Single 10/100 Ethernet port Pm8540. The module can be used in both Processor PMC monarch and non-monarch with front bezel access modes, acting as the host for the local PCI bus or as a peripheral on the local PCI bus, depending on the application or baseboard. ° Serial debug port ° Carrier Grade Linux ° Quality assured by over 30 years of design experience and a TL 9000 and ISO 9001:2000 certified quality management system. (FM 26789) Front page Interior page Block Diagram Development Mezzanine Card (DMC) DMC Connector Front Bezel LOGIC Reset Control Chip Selects P13 P14 Registers Clock Control GPIO PCI SMB RJ- 45 8540 P11 P12 2 JTAG I C LED Mini- RS- USB 232 DeVeLoPMeNT MeZZANINe CArD (DMC) Specifications ° Optional plug-on card (side 2) to speed ProCessor development Freescale PowerQUICC III 8540 ° EIA-232 debug serial port with cable to DB-9 ° Up to 1 GHz operation connector ° System-on-chip functions ° JTAG header for PLD programming Å PCI/PCI-X bus interface ° JTAG/COP header for software development Å Ethernet controller ° Four software configuration jumpers Å UART controller ° 32-pin PLCC 8-bit socket for software development Å DDR SDRAM controller ° Single connector to attache to PMC module Å DMA 2 I/o Å I C controller ethernet MeMorY ° Dual 10/100/1000 Ethernet with P14 connector access ° 256 or 512MB DDR SDRAM ° Single 10/100 BaseT Ethernet with front bezel access ° 16MB persistent memory DMA ° 32MB flash memory ° 4-channel DMA support ° Flash Architecture NOR ° High-speed data movement between any module resources without significant CPU intervention 2 Serial Port Ethernet Reset Switch 10/100 Magnetics PHY Power Monitor LEDs Local Bus ROM Socket LEDs Serial EEPROM Jumpers Serial Programming EEPROM Header RTC COP Header Flash 8540 16/32MB Config ROM Persistent Memory 16MB SDRAM 256/512MB 10/100/1000 PHYs Serial EEPROM Serial Front page Interior page PCI PHYsICAL CHArACTerIsTICs ° 33/66 MHz operation ° PMC form factor: 149.0 mm (5.87") x 74.0 mm (2.91") ° Monarch and non-monarch mode support (local ® host or peripheral) ° Baseboard and module fit in a single CompactPCI / ® CompactPCI PSB or ATCA slot ° PCI 2.2 ° Power requirements: 3.3 VDC or 5 VDC @ 11.5W typical other ° Operating range: 0° to 55° C, 5-95% relative ° EIA-232 serial console port accessible via front humidity (non-condensing) panel or P14 connector ° General purpose I/O (GPIO) accessible via the sPeC CoMPLIANCe P14 connector ° IEEE 1386.1 CMC/PMC ° JTAG/COP available during development via ° VITA 32 Processor PMC optional DMC ° Recessed front panel reset switch reGULATorY CoMPLIANCe ° FCC Part 15 (US) soFTWAre sUPPorT ° ICES-003 (Canada) ° Carrier Grade Linux ° IEC/UL/CSA 60950 ° Wind River VxWorks ° EN55022 MoNITor ° Flash-based monitor and power-up self-test software ° Command-line editing ° Board and device initialization and access ° Debug support soLUTIoN serVICes Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. ATCA and CompactPCI are registered trademarks of the PCI Industrial Computer Manufacturers Group. All other trademarks are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling DC Power Systems Outside Plant Site Monitoring ™ Business-Critical Continuity . Embedded Computing Power Switching & Control Surge & Signal Protection Emerson, Business-Critical Continuity, Emerson Emerson Network Power Network Power and the Emerson Network Power logo are Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Madison, WI U.S.A. 1 800 356 9602 or +1 608 831 5500 trademarks and service marks of Emerson Electric Co. Shanghai, China +8610 85631122 Paris, France +33 1 60 92 31 20 Tokyo, Japan +81 3 5403 2730 ©2008 Emerson Electric Co. Munich, Germany +49 89 9608 2333 Hong Kong, China +852 2176 3540 Tel Aviv, Israel +972 3 568 4387 www.EmersonNetworkPower.com/EmbeddedComputing PM8540-D1 4/08