Manufacturers
XP POWER SMQ300PS36-C
Description
XP Power SMQ300PS36-C Power Supply - 300W AC/DC U-Channel
Part Number
SMQ300PS36-C
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
Power Supply Board
Specifications
Hold Up Time
20 ms minimum at 120 VAC & 80% load
Input Current
5.00 A at 90 VAC (SMQ300), 6.35 A at 90 VAC (SMQ400)
Input Frequency
47-63 Hz
Input Voltage
90-264 VAC (120-370 VDC)
Inrush Current
35 A max at 230 VAC
Line Regulation
±1%
Load Regulation
±1%
Minimum Load
No minimum load required
Output Voltage
12 to 54 VDC - see datasheet
Output Voltage Trim
See datasheet
Overcurrent protection
120-150% of nominal current, auto recovery
Overtemperature Protection
Unit shuts down, auto recovery
Overvoltage Protection
115-130% Vnom, recycle input to reset
Power Factor
0.99 typical
Remote On/Off
On - TTL Logic High or Open circuit | Off - TTL Logic Low or Short circuit
Remote sense
Compensates for up to 0.5 V drop
Ripple & Noise
1% pk-pk, 20 MHz BW
Start Up Delay
2.5 s typical at 120 VAC
Transient Response
5% max. deviation, recovery to within 1% in 500 µs for a 50% load change
Features
- Output Current: Max. 8.33 A | Peak 17.07 A
- Output Voltage: Preset 36 V | Range 31-47 V
Datasheet
Extracted Text
300/400 Watts xppower.com SMQ Series • High Power Density • High Peak Load Rating • DC OK • Remote On/Off • Universal Input • Single Outputs from 12.0 V to 54.0 V • Internal Fan Specification Input General Input Voltage • 90-264 VAC (120-370 VDC) Efficiency • 80% typical Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output, 1500 VAC Input to Ground, Input Current • 5.00 A at 90 VAC (SMQ300), 250 VDC Output to Ground 6.35 A at 90 VAC (SMQ400) Switching Frequency • 60 kHz typical for PFC stage, Inrush Current • 35 A max at 230 VAC 30 kHz typical for main converter Power Factor • 0.99 typical 3 3 Power Density • 4.7 W/In (SMQ300), 6.25 W/In (SMQ400) Earth Leakage Current • <2.5 mA at 230 VAC/50Hz Signals • DC OK, TTL HIGH within 100-500 ms <1.5 mA at 115 VAC/60Hz LOW 1 ms before loss of regulation MTBF • 138 kHrs per MIL-HDBK-217F Output Output Voltage • 12 to 54 VDC - see table Environmental Output Voltage Trim • See table Operating Temperature • 0 ˚C to +70 ˚C, derate linearly from Minimum Load • No minimum load required 100% at +50 ˚C to 50% at +70 ˚C Start Up Delay • 2.5 s typical at 120 VAC Cooling • Via internal fan Hold Up Time • 20 ms minimum at 120 VAC & 80% load Operating Humidity • 5-90% RH, non-condensing Line Regulation •±1% Storage Temperature • -20 ˚C to +85 ˚C Load Regulation •±1% Shock • 15 g (non-operation), 11 ms half Transient Response • 5% max. deviation, recovery to within sine-wave, 3 times for each axis 1% in 500 µs for a 50% load change Vibration • 10 Hz - 55 Hz (non-operation) 2 g, Ripple & Noise • 1% pk-pk, 20 MHz BW sweep time 3 mins, 60 mins/axis Overvoltage Protection • 115-130% Vnom, recycle input to reset Overcurrent Protection • 120-150% of nominal current, EMC & Safety auto recovery Emissions • EN55022 and FCC Part 15, Overtemperature • Unit shuts down, auto recovery level B conducted Protection Harmonic Currents • EN61000-3-2 Remote Sense • Compensates for up to 0.5 V drop Voltage Flicker • EN61000-3-3 Remote On/Off • On = TTL Logic High or Open circuit ESD Immunity • EN61000-4-2, level 2 contact, level 3 air, Off = TTL Logic Low or Short circuit Perf Criteria A Radiated Immunity • EN61000-4-3, 3 V/m, Perf Criteria A EFT/Burst • EN61000-4-4, level 2, Perf Criteria A Surge • EN61000-4-5, level 3, Perf Criteria A Conducted Immunity • EN61000-4-6, level 2, Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B Safety Approvals • UL60950, CSA C22.2 No.60950, EN60950, CE Mark LVD AC-DC AC-DC L N SMQ Models and Ratings (1) Maximum Output Voltage Output Current Model (2) (3) Power Number Preset Range Maximum Peak 12 V 12-15 V 25.00 A 46.66 A SMQ300PS12-C†^ 15 V 12-15 V 20.00 A 46.66 A SMQ300PS15-C†^ 18 V 16-21 V 16.66 A 33.33 A SMQ300PS18-C 24 V 22-30 V 12.50 A 23.33 A SMQ300PS24-C†^ 300 W 27 V 22-30 V 11.11 A 23.33 A SMQ300PS27-C 36 V 31-47 V 8.33 A 17.07 A SMQ300PS36-C 48 V 48-56 V 6.25 A 12.72 A SMQ300PS48-C†^ 54 V 48-56 V 5.55 A 12.72 A SMQ300PS54-C 12 V 12-15 V 33.33 A 46.66 A SMQ400PS12-C†^ 15 V 12-15 V 26.66 A 46.66 A SMQ400PS15-C†^ 18 V 16-21 V 22.22 A 33.33 A SMQ400PS18-C 24 V 22-30 V 16.66 A 23.33 A SMQ400PS24-C†^ 400 W 27 V 22-30 V 14.81 A 23.33 A SMQ400PS27-C 36 V 31-47 V 11.11 A 17.07 A SMQ400PS36-C 48 V 48-56 V 8.33 A 12.72 A SMQ400PS48-C†^ 54 V 48-56 V 7.40 A 12.72 A SMQ400PS54-C Notes 1. Other voltages are available. Contact sales office for details. 2. Standard models have foldback mode current protection with a high peak load capacity. This peak can be taken for 500 µs max. 3. For optional U-channel versions without fan/cover, change SMQ prefix to SMU, and delete suffix ‘-C’ from model number. Requires forced air cooling at 18 CFM. † Available from Farnell. See pages 204-206. ^ Available from Newark. See pages 207-208. Mechanical Details A Mounting Hole 8 Places Scale 4:1 1.10 (27.94)* 1.50 (38.1) B B 2.00 (50.8) 0.22 (5.6) A A 0.25 (6.4) 0.75 (19.05) UNC6-32 (Zn-plated) 2.00 (50.8) 6.00 (152.4) 2.00 (50.8) 0.75 (19.05) 1.10 (27.94) A A 4.00 (101.6) Pin Control 1 B B 1.80 (45.72) 2.50 (63.5) B B A A 1.10 (27.94) 0.75 (19.05) Terminal Block 8.00 (203.2) M3 Screw 3 Pins 8.25 mm center Terminal Block B Mounting Hole 8 Places M3.5 Screw 6 Pins 9.5 mm center Scale 4:1 1.25 (31.75) Control Pin Function 0.22 (5.6) 1 DC OK A A 2 On/Off 0.25 (6.4) B B 1.50 (38.1) 3 RTN 2.00 (50.8) 4 -sense 1.10 (27.94)* M4 5 +sense (Zn (yellow) - plated) Notes 1. Dimensions in inches (mm). 2. Control connector mates with JST XHP-5 or equivalent. 3. Fan connector is wired in parallel to the internal fan. No auxiliary output is available. 4. Weight: 2.42 lbs (1100 g) approx. 5. Maximum mounting screw penetration: 0.15 (4.00) from case outer surfaces. 6. Remote ON/OFF activation is 3 minutes max. * Dimension for SMU models is 1.20 (30.48). 17-Apr-07 8.25 (0.32) VO+ VO- 0.02 (0.6) 0.02 (0.6) 0.07 (1.9) 0.07 (1.9)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the SMQ300PS36-C?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Xp Power JPM160PS13 power supply PSU, 160W, 13.5V, 11.8A industrial type
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods