XP POWER ECM40UD21

40100 Watts xppower.com ECM Series • Compact Size • IT & Medical Approvals • Convectioncooled • Class I and II Construction • DC Input Version Available (DCM Series) • PoE Isolation Version Available (POE Series) • 3 Year Warranty Specification Input General Efficiency • 80-85% depending on model Input Voltage • 90-264 VAC (120-370 VDC) Isolation • 4000 VAC Input to Output 2 x MOPP Input Frequency • 47-63 Hz; 440 Hz* ECM100 single output models, 1 x MOPP Input Current • 40 W: 0.4 A max at 230 VAC ECM100 multi output and all ECM40/60 60 W: 0.6 A max at 230 VAC models (contact sales for 2 x MOPP), 100 W: 0.9 A max at 230 VAC 1500 VAC Input to Ground 1 x MOPP, Inrush Current • 40 A max at 230 VAC 500 VAC Output to Ground Earth Leakage Current • <125 μA at 115 VAC/60 Hz Switching Frequency • 70 kHz typical <210 μA at 230 VAC/50 Hz 3 Power Density • 40 W: 4.2 W/In Power Factor • EN61000-3-2 3 60 W: 6.3 W/In 3 Input Protection • Internal T3.15 A, 250 V fuse in line 100 W: 7.4 W/In and neutral MTBF • 600 kHrs to MIL-HDBK-217F at 25 °C, GB Output Environmental Output Voltage • See tables Operating Temperature • 0 °C to +70 °C. Refer to derating curves Output Voltage Trim • ±5% on 3.3 V & 5 V versions, ±10% on for specific operating limitations. other single output models and V1 of Cooling • Convection & fan-cooled ratings multi-output models. (See note 1 for (see derating curves) ECM40/60 models) Operating Humidity • 95% RH, non-condensing Initial Set Accuracy • ±1.0% V1, ±5% V2, V3 & V4 Storage Temperature • -40 °C to +85 °C Minimum Load • See tables Operating Altitude • 3000 m Start Up Delay • 1.5 s max Shock • 30 g pk, half sine, 6 axes Start Up Rise Time • 10 ms max Vibration • 2 g rms, 5 Hz to 500 Hz, 3 axes Hold Up Time • 16/75 ms min at 115/230 VAC Line Regulation • ±0.5% EMC & Safety Load Regulation • ±1% single output models; Emissions • EN60601-1-2, EN61204-3, FCC 20780, ±3% V1, ±5% V2 & V3 ECM40/60 EN55022 & EN55011, level B conducted multi-output models. EN55022 Level A radiated ±1% V1 & V2, ±5% V3 & V4 ECM100 Harmonic Currents • EN61000-3-2, class A Cross Regulation • 2% on ECM40/60 only Voltage Flicker • EN61000-3-3 Over/Undershoot • None at turn on/off ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Transient Response • 4% max. deviation, recovery to within Radiated Immunity • EN61000-4-3, 10 V/m Perf Criteria A 1% in 500 μs for a 25% load change EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Ripple & Noise • 1% pk-pk, 20 MHz bandwidth Surge • EN61000-4-5, level 3 Perf Criteria A, Overvoltage Protection • 115-135% Vnom, recycle input to reset SEMI F47 Overload Protection • 110-150% on primary power limit, Conducted Immunity • EN61000-4-6, 10 V Perf Criteria A auto recovery Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, Short Circuit Protection • Trip and restart (hiccup mode) 100% 5000 ms, Perf Criteria A, B, B EN60601-1, 30% 500 ms, 60% 100 ms, Temperature • 0.05%/°C 100% 10 ms, 100% 5000 ms, Coefficient Perf Criteria A, A (with 50% load), A, B Peak Load • 120% for 100 ms ECM40/60 (see note 3) Safety Approvals • EN60601-1, ANSI/AAMI ES60601-1, CSA22.2 No.60601-1 per cUL, Including * Safety approvals cover frequency range 47-63 Hz Risk Management, EN60950-1, UL60950-1 ACDC ACDC ECM40 Models and Ratings Output 1 Output 2 Output 3 (2) Output Power Model Number Current Current Current Voltage Voltage Voltage (3) Min/Max Min/Max Min/Max 5.0 V 0.0 A/8.0 A ECM40US05†^ 7.0 V 0.0 A/5.7 A ECM40US07† 9.0 V 0.0 A/4.4 A ECM40US09†^ 12.0 V 0.0 A/3.5 A ECM40US12†^ 15.0 V 0.0 A/2.7 A ECM40US15†^ 18.0 V 0.0 A/2.2 A ECM40US18† 24.0 V 0.0 A/1.7 A ECM40US24†^ 33.0 V 0.0 A/1.2 A ECM40US33† 40 W 48.0 V 0.0 A/0.9 A ECM40US48†^ +5.0 V 0.5 A/6.0 A +12.0 V 0.1 A/2.0 A ECM40UD21† +5.0 V 0.5 A/6.0 A +15.0 V 0.1 A/1.5 A ECM40UD22†^ +5.0 V 0.5 A/6.0 A +12.0 V 0.1 A/2.0 A -12.0 V 0.0 A/0.5 A ECM40UT31†^ +5.0 V 0.5 A/6.0 A +24.0 V 0.1 A/1.0 A -12.0 V 0.0 A/0.5 A ECM40UT32† +5.0 V 0.5 A/6.0 A +15.0 V 0.1 A/1.5 A -15.0 V 0.0 A/0.5 A ECM40UT33†^ +3.3 V 0.5 A/6.0 A +5.0 V 0.1 A/1.5 A +12.0 V 0.0 A/0.5 A ECM40UT34†^ +5.0 V 0.5 A/6.0 A +3.3 V 0.1 A/1.5 A +12.0 V 0.0 A/0.5 A ECM40UT35† Notes 1. V2 will track a change in V1 by the same percentage change in voltage as V1 is trimmed. 2. To receive unit with cover fitted, add suffix ‘-C’ to model number. For Class I operation only. 3. A 120% peak load can be taken for up to 100 ms with a 25% duty cycle. Average load not to exceed 40 W. † Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296. Mechanical Details 4.00 (101.6) Input Connector J1 3.75 (95.25) 1.20 (30.5) Pin 1 Line Pin 2 Neutral J1 mates with 1 Molex housing 43061-0003 & Molex series 5194 crimp terminals 2.00 J2 Ground tab (0.25 faston) standard (50.8) Output Connector J2 1.75 6 Pin Single Multi (44.45) 1 V1 +V1 2 V1 +V1 3 RTN RTN 4 RTN RTN 5 NC V3 0.25 x 0.32 faston ground tab 6 NC +V2 V Adj. 4 x ø0.156 (3.96) mounting holes 0.14 (3.5) J2 mates with ø0.312 (7.92) clearance top and bottom SMD component height Molex housing 43061-0006 & Molex series 5194 crimp terminals Notes 1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 4. Mating connector kit available. Order part number ECM40/60 CONKIT†. 2. Weight: approx. 0.33 lbs (150 g) 5. Covers available. Order part number ECM40/60 COVER†^. 3. Cable harnessess with 300 mm wire available. Cover dimensions are 4.49 x 2.52 x 1.52 (114 x 64 x 38.5) For single output models, order part number ECM40/60S LOOM†. 6. 3D drawing files available from www.xppower.com/cad.php. For multi-output models, order part number ECM40/60DT LOOM†^. Derating Curves All ECM40 models convectioncooled All ECM40 models with 5 CFM 100% 100% 75% 75% 50% 50% 25% 25% 0 % 0 % 0 30 40 50 60 70 80 0 30 40 50 60 70 80 10 20 10 20 Ambient Temp (°C) Ambient Temp (°C) Note: Derate by 10% if cover is fitted Consult longform datasheet for installation information regarding optimum thermal ratings in convection-cooled applications. Output Power Output Power ECM60 Models and Ratings Output 1 Output 2 Output 3 (2) Output Power Model Number Current Current Current Voltage Voltage Voltage (3) Min/Max Min/Max Min/Max 5.0 V 0.0 A/12.00 A ECM60US05†^ 7.0 V 0.0 A/8.60 A ECM60US07†^ 9.0 V 0.0 A/6.70 A ECM60US09^ 12.0 V 0.0 A/5.00 A ECM60US12†^ 15.0 V 0.0 A/4.00 A ECM60US15†^ 18.0 V 0.0 A/3.30 A ECM60US18† 20.0 V 0.0 A/3.00 A ECM60US20 24.0 V 0.0 A/2.50 A ECM60US24†^ 28.0 V 0.0 A/2.14 A ECM60US28†^ 60 W 33.0 V 0.0 A/1.80 A ECM60US33†^ 48.0 V 0.0 A/1.25 A ECM60US48†^ +5.0 V 0.5 A/8.00 A +12.0 V 0.1 A/3.0 A ECM60UD21^ +5.0 V 0.5 A/8.00 A +15.0 V 0.1 A/2.5 A ECM60UD22 +5.0 V 0.5 A/8.00 A +12.0 V 0.1 A/3.0 A -12.0 V 0.0 A/0.5 A ECM60UT31†^ +5.0 V 0.5 A/8.00 A +24.0 V 0.1 A/1.5 A -12.0 V 0.0 A/0.5 A ECM60UT32† +5.0 V 0.5 A/8.00 A +15.0 V 0.1 A/2.5 A -15.0 V 0.0 A/0.5 A ECM60UT33†^ +3.3 V 0.5 A/8.00 A +5.0 V 0.1 A/1.5 A +12.0 V 0.0 A/0.5 A ECM60UT34†^ +5.0 V 0.5 A/8.00 A +3.3 V 0.1 A/1.5 A +12.0 V 0.0 A/0.5 A ECM60UT35† Notes 1. V2 will track a change in V1 by the same percentage change in voltage as V1 is trimmed. 2. To receive unit with cover fitted, add suffix ‘-C’ to model number. For Class I operation only. 3. A 120% peak load can be taken for up to 100 ms with a 25% duty cycle. Average load not to exceed 60 W. † Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296. Mechanical Details Input Connector J1 4.00 (101.6) Pin 1 Line 3.75 (95.25) 1.20 (30.5) Pin 2 Neutral J1 mates with Molex housing 43061-0003 & Molex series 5194 crimp terminals. 1 Ground (0.25 faston) tab standard. 2.00 J2 (50.8) Output Connector J2 Pin Single Multi 1.75 6 1 V1 +V1 (44.45) 2 V1 +V1 3 RTN RTN 4 RTN RTN 5 NC V3 6 NC +V2 0.25 x 0.32 faston ground tab V Adj. J2 mates with 4 x ø0.156 (3.96) mounting holes 0.14 (3.5) Molex housing 43061-0006 & ø0.312 (7.92) clearance top and bottom SMD component height Molex series 5194 crimp terminals. Notes 1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 4. Mating connector kit available. Order part number ECM40/60 CONKIT†. 2. Weight: 0.33 lbs (150 g) approx. 5. Covers available. Order part number ECM40/60 COVER^†. Cover dimensions 3. Cable harnesses with 300 mm wire available. are 4.49 x 2.52 x 1.52 (114 x 64 x 38.5). For single output models, order part number ECM40/60S LOOM†. 6. Selected single output models available in a 3” x 5” footprint for OEM For multi-output models, order part number ECM40/60DT LOOM†. quantities. Contact sales for details. 7. 3D drawing files available from www.xppower.com/cad.php. Derating Curves All ECM60 models convectioncooled All ECM60 models with 5 CFM 100% 100% 75% 75% 50% 50% 25% 25% 0 % 0 % 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 Ambient Temp (°C) Ambient Temp (°C) Note: Derate by 10% if cover is fitted Consult longform datasheet for installation information regarding optimum thermal ratings in convection-cooled applications. ACDC Output Power Output Power ACDC ECM100 Models and Ratings Single Output Models Output Output Current (1) Model Number Voltage Minimum Maximum with 5 CFM Cooling 3.3 V 0.0 A 15.0 A 20.0 A ECM100US03†^ 5.0 V 0.0 A 15.0 A 20.0 A ECM100US05†^ 7.0 V 0.0 A 11.4 A 14.3 A ECM100US07†^ 9.0 V 0.0 A 8.8 A 11.1 A ECM100US09†^ 12.0 V 0.0 A 7.5 A 8.3 A ECM100US12†^ 15.0 V 0.0 A 6.0 A 6.6 A ECM100US15†^ 18.0 V 0.0 A 5.0 A 5.5 A ECM100US18†^ 24.0 V 0.0 A 4.1 A 4.1 A ECM100US24†^ 28.0 V 0.0 A 3.6 A 3.6 A ECM100US28 33.0 V 0.0 A 3.0 A 3.0 A ECM100US33†^ 48.0 V 0.0 A 2.1 A 2.1 A ECM100US48†^ Multi Output Models Output Power Output 1 Output 2 Output 3 Output 4 (1) Convection Forced Air Current Current Current Current Model Number Voltage Voltage Voltage Voltage Cooled 5 CFM Min/Max Min/Max Min/Max Min/Max 80 W 100 W +5.0 V 0.0 A/12.0 A +12.0 V 0.0 A/3.0 A ECM100UD21 80 W 100 W +5.0 V 0.0 A/12.0 A +15.0 V 0.0 A/3.0 A ECM100UD22 75 W 100 W +5.0 V 0.5 A/10.0 A +12.0 V 0.0 A/3.0 A -12.0 V 0.0 A/0.8 A ECM100UT31†^ 80 W 100 W +5.0 V 0.5 A/10.0 A +24.0 V 0.0 A/2.0 A -12.0 V 0.0 A/0.8 A ECM100UT32 80 W 100 W +5.0 V 0.5 A/10.0 A +15.0 V 0.0 A/3.0 A -15.0 V 0.0 A/0.8 A ECM100UT33†^ 65 W 100 W +3.3 V 0.5 A/10.0 A +5.0 V 0.0 A/5.0 A +12.0 V 0.0 A/0.8 A ECM100UT34^ 70 W 100 W +5.0 V 0.5 A/10.0 A +3.3 V 0.0 A/5.0 A +12.0 V 0.0 A/0.8 A ECM100UT35 80 W 100 W +5.0 V 0.5 A/10.0 A +12.0 V 0.0 A/3.0 A -5.0 V 0.0 A/0.8 A ECM100UT36 70 W 100 W +5.0 V 0.5 A/10.0 A +15.0 V 0.0 A/3.0 A -5.0 V 0.0 A/0.8 A ECM100UT37 65 W 100 W +5.0 V 0.5 A/10.0 A +3.3 V 0.1 A/5.0 A +12.0 V 0.0 A/0.8 A -12.0 V 0.0 A/0.5 A ECM100UQ41†^ 60 W 100 W +3.3 V 0.5 A/10.0 A +5.0 V 0.1 A/5.0 A +12.0 V 0.0 A/0.8 A -12.0 V 0.0 A/0.5 A ECM100UQ42†^ 80 W 100 W +5.0 V 0.5 A/10.0 A +24.0 V 0.1 A/2.0 A +12.0 V 0.0 A/0.8 A -12.0 V 0.0 A/0.5 A ECM100UQ43†^ 80 W 100 W +5.0 V 0.5 A/10.0 A +24.0 V 0.1 A/2.0 A +15.0 V 0.0 A/0.8 A -15.0 V 0.0 A/0.5 A ECM100UQ44†^ 80 W 100 W +5.0 V 0.5 A/10.0 A +12.0 V 0.1 A/3.0 A -12.0 V 0.0 A/0.8 A -5.0 V 0.0 A/0.5 A ECM100UQ45†^ 80 W 100 W +5.0 V 0.5 A/10.0 A +15.0 V 0.1 A/3.0 A -15.0 V 0.0 A/0.8 A -5.0 V 0.0 A/0.5 A ECM100UQ46† Notes 1. To receive unit with cover fitted, add suffix ‘-C’ to model number. For Class I 2. Output 3 available with opposite polarity for OEM quantities. operation only. † Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296. Mechanical Details Input Connector J1 Pin 1 Line 4.50 (114.3) Pin 2 Neutral 0.12 (3.2) 4.25 (107.9) 1.20 (30.5) J1 mates with Molex housing 43061-0003 and Molex series 5194 crimp terminals. Ground (0.25 faston) tab standard. 1 Output Connector J2 2.25 Pin Single Multi (57.1) 2.50 2 1 V1 +V1 (63.5) J1 2 V1 +V1 1 2.10 3 V1 +V1 J2 (53.3) 4 V1 +V1 5 V1 RTN RTN 1.27 6 V1 RTN RTN (32.2) 7 V1 RTN RTN 12 8 V1 RTN RTN 9 NOT USED +V2 10 0.14 (3.5) NOT USED +V2 V Adj. 0.20 1.25 (3.2) 0.20 0.25 faston ground tab SMD component height 11 NOT USED ±V3 (5.1) (5.1) 12 NOT USED -V4 4X ø0.16 (4.0) mounting holes Cover dimensions are 4.98 x 3.01 x ø0.31 (7.9) clearance top and bottom J2 mates with Molex housing 43061-0012 and Molex 1.54 (126.5 x 76.4 x 39.0) series 5194 crimp terminals. Notes 1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 4. Mating connector kit available for single output models. Order part number 2. Weight: 0.4 lbs (180 g) approx. ECM100S CONKIT†^. 3. Cable harnessess with 300 mm wire available. For single output models, order 5. Covers available. Order part number ECM100 COVER†^. part number ECM100S LOOM†. For multi-outputs (dual and triple output only), 6. Available in a 3” x 5” footprint for OEM quantities. Contact sales for details. p/n ECM100DT LOOM†. 7. 3D drawing files available from www.xppower.com/cad.php. Derating Curves All ECM100 single output models convectioncooled All ECM100 models with 5 CFM 100 A B US24-48 100% A Note: 80 B US12-18 75% C 1. Derate by 10% if cover is fitted. 60 C US05 2. For multi output convection- D 50% 40 cooled operation above +50 °C D US03 25% derate linearly to 50% at +70 °C. 20 0% 0 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 Ambient Temp (°C) Ambient Temp (°C) Consult longform datasheet for installation information regarding optimum thermal ratings in convection-cooled applications. Output Power (W) Output Power - + DCM60/100 Models and Ratings Output Current Output (1) Max Max - 5CFM Input Voltage Range Input Current UVLO Model Number (6) Voltage Min Convection forced -cooling -cooling 1.5 A (2.5 A max) 12 V 0.25 A 5.00 A 5.00 A DCM6048S12 36-76 VDC 32 - 35 VDC (48 VDC Nominal) 2.2 A (3.5 A max) 12 V 0.40 A 7.50 A 8.30 A DCM10048S12 Notes 1. Can be configured as -48 VDC input. 4. For a fitted cover version, add suffix ‘-C’ to model number (power derates by 2. Input reverse voltage protection is continuous with automatic recovery. 20% with cover fitted) 3. Input transients compliant with ETSI EN300 132:2003. 5. For full product details contact sales, or visit www.xppower.com 6. 5% minimum load required to meet all specification parameters Mechanical Details DCM60 4.00 (101.6) Input Connector J1 Pin 1 -Vin 1.20 (30.5) 3.75 (95.2) 0.125 (3.2) Pin 2 +Vin J1 mates with Molex housing 43061-0003 & 1 Molex series 5194 crimp terminals 1.75 J2 2.00 2 (44.4) J1 (50.8) 1 6 1.61 (41.0) Output Connector J2 0.87 (22.2) Pin Single 1 12V 2 12V Voltage Adjust 0.21 (5.4) 3 RTN 0.12 (3.2) 0.14 (3.5) 4 RTN Ground Connection through SMD Component Height 0.20 (5.1) 5 NC mounting holes 6 NC 4 x 0.15 (3.9) mounting holes ø0.31 (7.9) clearance top and bottom J2 mates with Molex housing 43061-0006 & Molex series 5194 crimp terminals Input Connector J1 DCM100 Pin 1 -Vin Pin 2 +Vin 4.50 (114.3) J1 mates with Molex housing 43061-0003 & 4.25 (107.9) Molex series 5194 crimp terminals 1.20 (30.5) 0.12 (3.2) Output Connector J2 1 Pin Single 2.25 + 2.50 (57.1) 2 1 12V J2 (63.5) J1 1 2 12V 2.10 (53.3) 3 12V 4 12V 5 RTN 1.29 (32.8) 6 RTN 12 7 RTN 8 RTN Voltage Adjust 0.20 (5.1) 0.12 (3.2) 9 NC 0.14 (3.5) Ground Connection through 10 NC 0.20 (5.1) SMD Component Height mounting holes 11 NC 12 NC 4 x 0.15 (3.9) mounting holes ø0.31 (7.9) clearance top and bottom J2 mates with Molex housing 43061-0012 & Molex series 5194 crimp terminals Notes 1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 2. Weight: DCM60: 0.3 lbs (136 g) approx. DCM100: 0.4 lbs (181 g) approx. 3. Cover kits available separately, order part number no. ECM40/60 COVER (4.49 x 2.52 x 1.52 (114 x 64 x 38.5)) for DCM60 or part no. ECM100 COVER (4.96 x 3.05 x 1.52 (126 x 77.5 x 38.5)) for DCM100. Output power derates by 20% with cover fitted. ACDC - ACDC 1 2 J1 L N POE100 Models and Ratings Input Current (1) Earth Input Voltage Output Input Frequency Leakage Output Voltage Output Current Model Number Range Power 115 VAC 230 VAC Current 90-264 VAC 47-63 Hz 1.8 A max 1.1 A max <1 mA 100 W +56 V 1.8 A POE100US56 (120-370 VDC) Notes 1. Earth leakage current rated at 264 VAC/60 Hz. 3. Output to Ground Isolation 1500 VAC POE version. 2. Input is protected with internal T3.15 A, 250 V, fuse in line 4. For full product details contact sales, or visit www.xppower.com Mechanical Details 4.00 (101.6) 4X Ø0.156 (3.96) mounting holes Ø0.312 (7.92) clearance top and bottom 0.13 3.75 (95.3) (3.2) 1.25 (31.8) 2.00 1.75 (50.8) (44.5) 1.26 (32.0) 0.94 (23.8) 0.13 0.19 (4.8) Voltage Adjust (3.2) 0.20 0.21 SMD Component Height (5.1) (5.3) 0.25” Faston Ground Tab Input Connector J1 Output Connector J2 Pin 1 Line Pin 1 56V Pin 2 Neutral Pin 2 56V 0.25” Faston Earth Pin 3 RTN Pin 4 RTN J1 mates with Molex housing 09-50-1031 & J2 mates with Molex series 5194 crimp terminals Molex housing 09-50-1041 & Molex series 5194 crimp terminals Notes 1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 2. Weight 0.35 lb (158 g) approx. Derating Curves Convectioncooled Fancooled with 10 CFM 100 80 80 60 60 40 40 20 20 0 0 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 Ambient Temp (°C) Ambient Temp (°C) 27-Sept-12 Output Power (W) J2 1 Output Power (W)