Industrial Trading

Description

XP Power PM65-40A Power Supply - 65W AC/DC 4 Outputs Medical Open Frame

Part Number

PM65-40A

Price

Request Quote

Manufacturer

XP POWER

Lead Time

Request Quote

Category

Power Supply Board

Specifications

Derating

Derate from 100% at +50°C linearly to 50% at +70°C

Efficiency

70% minimum on single output models with Vo >12V, 65% minimum on the others.

Hold-up time

10 msec minimum at 110VAC

Input Current

1.60A(rms)for 115VAC | 1.00A(rms)for 230VAC

Input Frequency

47 to 63 Hz

Input Voltage

85 to 264 VAC

Inrush Current

15 amps @ 115VAC, or 30 amps @ 230VAC, at 25°C cold start

LEAKAGE CURRENT

90uA max. @ 115VAC, 60Hz | 150uA max. @ 230VAC, 50Hz

Line Regulation

±0.5% maximum at full load

MTBF

400,000 hours minimum at full load at 25°C ambient , calculated per MIL-HDBK-217F

Operating Temperature

0°C to +70°C

Output voltage/current

See rating chart

Overcurrent protection

All outputs protected to short circuit conditions

Overvoltage Protection

Provided on output #1 only; set at 112 - 132% of its nominal output voltage

Relative humidity

5% to 95% non-condensing

Ripple and Noise

1% peak to peak maximum

Storage Temperature

-40°C to +85°C

Switching Frequency

32KHz ±5KHz

Temperature Coefficient

All outputs ±0.04%/°C maximum

Total output power

65 watts maximum

Transient Response

Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500us after a 25% step load change

Withstand voltage

4000VAC from input to output | 1500VAC from input to ground | 500VAC from output to ground

Features

100% burn-in
Input surge current protection
Low safety ground leakage current
Meet EN 55011 and FCC Class B
Overcurrent protection
Overvoltage protection
Small size, light weight
Wide input range 85 to 264 VAC

Datasheet

XP Power=PM65Series=ds1-1622818470.pdf

486 KiB

Download

Extracted Text

PROTEK 50-65 WATT MEDICAL SWITCHING POWER SUPPLIES DESCRIPTION PM65 SERIES (LVD) The PM65 series of compact, open PCB constructed, RoHS AC-DC switching power supplies are capable of delivering 50 to 65 watts of continuous power. They are ideally suited for use in medical equipment not for life support and operate at 85 to 264VAC input voltage without the need of voltage selection. All models meet the safety requirements of UL, CSA and IEC. FEATURES ‧ Low safety ground leakage current ‧ Meet EN 55011 and FCC Class B ‧ Small size, light weight ‧ 100% burn-in ‧ Wide input range 85 to 264VAC Safety Standard Approvals： ‧ Input surge current protection ‧ Overvoltage protection UL 2601-1 ‧ Overcurrent protection File No. E178020 ‧ Compliant with RoHS requirements CSA C22.2 No. 601.1 File No. LR93632 INPUT SPECIFICATIONS Input voltage： 85 to 264VAC TÜV EN60601-1 Input frequency： 47 to 63Hz Certificate No. R9172041 1.60A（rms）for 115VAC Input current： 1.00A（rms）for 230VAC Earth leakage current: 90uA max. @ 115VAC, 60Hz 150uA max. @ 230VAC, 50Hz GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Switching frequency： 32KHz ±5KHz 70﹪ minimum on single output models with Efficiency： See rating chart Output voltage/current： Vo ≧12V, 65% minimum on the others. Total output power： 65 watts maximum 10 msec minimum at 110VAC Hold-up time： Ripple and noise： 1﹪peak to peak maximum Line regulation： ±0.5﹪ maximum at full load Overvoltage protection： Provided on output #1 only; Inrush current： 15 amps @ 115VAC or 30 amps @ 230VAC, at 25℃ cold start set at 112-132﹪of its Withstand voltage： nominaloutput voltage 4000VAC from input to output 1500VAC from input to ground Overcurrent protection： All outputs protected to 500VAC from output to ground short circuit conditions 400,000 hours minimum at full load at 25℃ MTBF： Temperature coefficient： All outputs ±0.04﹪/℃ ambient , calculated per MIL-HDBK-217F maximum EMC Performance (EN60601-1-2: 2001) Maximum excursion of 4﹪ or Transient response： Class B conducted, Class B radiated EN55011: better on all models, recovering FCC: Class B conducted, Class B radiated to 1﹪of final value within 500us Class B conducted, Class B radiated VCCI: after a 25﹪step load change EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity, 3V/m, for 80~2500MHz ENVIRONMENTAL SPECIFICATIONS EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. Operating temperature： 0℃℃ to +70 EN61000-4-6: Conducted immunity, 3Vrms Storage temperature： -40℃℃ to +85 EN61000-4-8: Magnetic field immunity, 3A/m Relative humidity： 5﹪to 95﹪non-condensing Voltage dips, 30% reduction for 500ms, 60% EN61000-4-11: Derating： Derate from 100﹪at +50℃ reduction for 100ms and >95% reduction for linearly to 50% at +70℃ 10ms 2-9 UNIVERSAL INPUT PM65 MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Maximum (1)(2) Output #1 Output #2 Output #3 Output #4 Output MODEL Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Power PM65-10A 5V 0A 10A 2% (N/A) (N/A) (N/A) 50W PM65-12A 12V 0A 5.5A 1% (N/A) (N/A) (N/A) 65W PM65-13A 15V 0A 4.5A 1% (N/A) (N/A) (N/A) 65W PM65-14A 24V 0A 3.0A 1% (N/A) (N/A) (N/A) 65W PM65-16A 30V 0A 2.5A 1% (N/A) (N/A) (N/A) 65W PM65-17A 36V 0A 2.2A 1% (N/A) (N/A) (N/A) 65W PM65-23A +5V 1A 6.0A 3%+12V 0.5A 3.0A 5% (N/A) (N/A) 65W PM65-24A +5V 1A 6.0A 3%+15V 0.4A 3.0A 5% (N/A) (N/A) 65W PM65-25A +5V 1A 6.0A 3%+24V 0.3A 2.0A 5% (N/A) (N/A) 65W PM65-30A +5V 1A 6.0A 3%+12V 0.5A 3.0A 5% -5V 0.1A 0.5A10% (N/A) 65W PM65-31A +5V 1A 6.0A 3%+12V 0.5A 3.0A 5% -12V 0.1A 0.5A10% (N/A) 65W PM65-32A +5V 1A 6.0A 3%+15V 0.4A 3.0A 5% -15V 0.1A 0.5A10% (N/A) 65W PM65-33A +5V 1A 6.0A 3%+15V 0.4A 3.0A 5% -12V 0.1A 0.5A10% (N/A) 65W PM65-39A +5V 1A 6.0A 3%+24V 0.3A 2.0A 5% -12V 0.1A 0.5A10% (N/A) 65W PM65-40A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% -5V 0.1A 0.5A 10% 65W NOTES: 1. All multiple output models may be operated at no-load without damage. At no-load, output voltage tolerance increases to 10% 2. Safety agency approvals are for the above listed models in PCB format. To order a model with a metallic L-bracket or box, change suffix “A” to “B” for L-bracket format or to “C” for enclosed format (mechanical details shown in page 7-2), e.g. PM65-25C. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3081 and Molex 2878 series crimp terminal. 5. Weight: 400 grams (PCB format) 6. The “＊” marked mounting hole is for system grounding through a metallic stand-off to the system chassis. PIN CHART PIN 1 2 3 4 5 6 7 8 MODEL PM65-10A PM65-12A OUTPUT OUTPUT OUTPUT OUTPUT PM65-13A PM65-14A RETURN RETURN RETURN RETURN #1 #1 #1 #1 PM65-16A PM65-17A PM65-23A PM65-24A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT N.C. N.C. PM65-25A #1 #1 RETURN RETURN #2 #2 PM65-30A PM65-31A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT PM65-32A PM65-33A N.C. #1 #1 RETURN RETURN #2 #2 #3 PM65-39A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT OUTPUT PM65-40A #1 #1 RETURN RETURN #2 #2 #3 #4 2-10

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products