PROTEK 50-65 WATT MEDICAL SWITCHING POWER SUPPLIES DESCRIPTION PM65 SERIES (LVD) The PM65 series of compact, open PCB constructed, RoHS AC-DC switching power supplies are capable of delivering 50 to 65 watts of continuous power. They are ideally suited for use in medical equipment not for life support and operate at 85 to 264VAC input voltage without the need of voltage selection. All models meet the safety requirements of UL, CSA and IEC. FEATURES ‧ Low safety ground leakage current ‧ Meet EN 55011 and FCC Class B ‧ Small size, light weight ‧ 100% burn-in ‧ Wide input range 85 to 264VAC Safety Standard Approvals： ‧ Input surge current protection ‧ Overvoltage protection UL 2601-1 ‧ Overcurrent protection File No. E178020 ‧ Compliant with RoHS requirements CSA C22.2 No. 601.1 File No. LR93632 INPUT SPECIFICATIONS Input voltage： 85 to 264VAC TÜV EN60601-1 Input frequency： 47 to 63Hz Certificate No. R9172041 1.60A（rms）for 115VAC Input current： 1.00A（rms）for 230VAC Earth leakage current: 90uA max. @ 115VAC, 60Hz 150uA max. @ 230VAC, 50Hz GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Switching frequency： 32KHz ±5KHz 70﹪ minimum on single output models with Efficiency： See rating chart Output voltage/current： Vo ≧12V, 65% minimum on the others. Total output power： 65 watts maximum 10 msec minimum at 110VAC Hold-up time： Ripple and noise： 1﹪peak to peak maximum Line regulation： ±0.5﹪ maximum at full load Overvoltage protection： Provided on output #1 only; Inrush current： 15 amps @ 115VAC or 30 amps @ 230VAC, at 25℃ cold start set at 112-132﹪of its Withstand voltage： nominaloutput voltage 4000VAC from input to output 1500VAC from input to ground Overcurrent protection： All outputs protected to 500VAC from output to ground short circuit conditions 400,000 hours minimum at full load at 25℃ MTBF： Temperature coefficient： All outputs ±0.04﹪/℃ ambient , calculated per MIL-HDBK-217F maximum EMC Performance (EN60601-1-2: 2001) Maximum excursion of 4﹪ or Transient response： Class B conducted, Class B radiated EN55011: better on all models, recovering FCC: Class B conducted, Class B radiated to 1﹪of final value within 500us Class B conducted, Class B radiated VCCI: after a 25﹪step load change EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity, 3V/m, for 80~2500MHz ENVIRONMENTAL SPECIFICATIONS EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. Operating temperature： 0℃℃ to +70 EN61000-4-6: Conducted immunity, 3Vrms Storage temperature： -40℃℃ to +85 EN61000-4-8: Magnetic field immunity, 3A/m Relative humidity： 5﹪to 95﹪non-condensing Voltage dips, 30% reduction for 500ms, 60% EN61000-4-11: Derating： Derate from 100﹪at +50℃ reduction for 100ms and >95% reduction for linearly to 50% at +70℃ 10ms 2-9 UNIVERSAL INPUT PM65 MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Maximum (1)(2) Output #1 Output #2 Output #3 Output #4 Output MODEL Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Power PM65-10A 5V 0A 10A 2% (N/A) (N/A) (N/A) 50W PM65-12A 12V 0A 5.5A 1% (N/A) (N/A) (N/A) 65W PM65-13A 15V 0A 4.5A 1% (N/A) (N/A) (N/A) 65W PM65-14A 24V 0A 3.0A 1% (N/A) (N/A) (N/A) 65W PM65-16A 30V 0A 2.5A 1% (N/A) (N/A) (N/A) 65W PM65-17A 36V 0A 2.2A 1% (N/A) (N/A) (N/A) 65W PM65-23A +5V 1A 6.0A 3%+12V 0.5A 3.0A 5% (N/A) (N/A) 65W PM65-24A +5V 1A 6.0A 3%+15V 0.4A 3.0A 5% (N/A) (N/A) 65W PM65-25A +5V 1A 6.0A 3%+24V 0.3A 2.0A 5% (N/A) (N/A) 65W PM65-30A +5V 1A 6.0A 3%+12V 0.5A 3.0A 5% -5V 0.1A 0.5A10% (N/A) 65W PM65-31A +5V 1A 6.0A 3%+12V 0.5A 3.0A 5% -12V 0.1A 0.5A10% (N/A) 65W PM65-32A +5V 1A 6.0A 3%+15V 0.4A 3.0A 5% -15V 0.1A 0.5A10% (N/A) 65W PM65-33A +5V 1A 6.0A 3%+15V 0.4A 3.0A 5% -12V 0.1A 0.5A10% (N/A) 65W PM65-39A +5V 1A 6.0A 3%+24V 0.3A 2.0A 5% -12V 0.1A 0.5A10% (N/A) 65W PM65-40A +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% -5V 0.1A 0.5A 10% 65W NOTES: 1. All multiple output models may be operated at no-load without damage. At no-load, output voltage tolerance increases to 10% 2. Safety agency approvals are for the above listed models in PCB format. To order a model with a metallic L-bracket or box, change suffix “A” to “B” for L-bracket format or to “C” for enclosed format (mechanical details shown in page 7-2), e.g. PM65-25C. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3081 and Molex 2878 series crimp terminal. 5. Weight: 400 grams (PCB format) 6. The “＊” marked mounting hole is for system grounding through a metallic stand-off to the system chassis. PIN CHART PIN 1 2 3 4 5 6 7 8 MODEL PM65-10A PM65-12A OUTPUT OUTPUT OUTPUT OUTPUT PM65-13A PM65-14A RETURN RETURN RETURN RETURN #1 #1 #1 #1 PM65-16A PM65-17A PM65-23A PM65-24A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT N.C. N.C. PM65-25A #1 #1 RETURN RETURN #2 #2 PM65-30A PM65-31A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT PM65-32A PM65-33A N.C. #1 #1 RETURN RETURN #2 #2 #3 PM65-39A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT OUTPUT PM65-40A #1 #1 RETURN RETURN #2 #2 #3 #4 2-10