Manufacturers
XP POWER CU20-12
Description
20W AC/DC Switching Power Supply / Open Frame
Part Number
CU20-12
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
None
Datasheet
Extracted Text
10-20 Watts xppower.com CU10-20 Series • Low Cost • Small Size • PCB Mount & Open Frame • 15 Watt Medical Version Available • Single Output 3-24 V • Peak Load Capability • Non-standard Outputs Available Specification Input General Input Voltage • 85-264 VAC (120-370 VDC) Efficiency • See tables Input Frequency • 47-63 Hz Isolation • 4000 VAC Input to Output (CU15-M) 3000 VAC Input to Output (CU10/15/20) Input Current • 0.13 A rms at 230 VAC (CU10) 1500 VAC Input to Ground (CU20) 0.20 A rms at 230 VAC (CU15) 500 VAC Output to Ground (CU20) 0.25 A rms at 230 VAC (CU20) Switching Frequency • 100 kHz typical for 10 W models Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, 67 kHz typical for 15/20 W models cold start 25 ºC 3 3 Power Density • 2.43 W/in (CU10); 3.17 W/in (CU15); Earth Leakage Current • Class 2 (CU10/15/15-M) 3 3 2.92 W/in (CU15-M); 3.91 W/in (CU20) Class 1 <1.5 mA (CU20) MTBF • >500 kHrs per MIL-HDBK-217F Input Protection • 1A fuse (CU10) (15 & 24 V units >400 kHrs) 2A fuse (CU15, CU15-M, CU20) Environmental Output Operating Temperature • CU10/15/20: 0 ˚C to +65 ˚C, derate from Output Voltage • See table full load at +45 ˚C to no load at +65 ˚C Output Voltage Trim • ±5% CU15-M: 0 ˚C to +70 ˚C, derate from Initial Set Accuracy • ±1% full load at +50 ˚C to 50% load at +70 ˚C Minimum Load • No minimum load required Cooling • Convection-cooled Start Up Delay • 1.5 s max Operating Humidity • 95% RH, non-condensing Start Up Rise Time • 14 ms max Storage Temperature • -20 ˚C to +85 ˚C Hold Up Time • 16 ms typical at full load and 115 VAC Operating Altitude • 3000 m Drift • 0.6% Vibration • 10 Hz to 500 Hz, 2 G for 10 mins/cycle Line Regulation • 0.5% max 60 min each cycle Load Regulation • 1.0% max 10% load to full load EMC & Safety Transient Response • 4% max deviation, recovery to within 1% within 500 µs for 25% load change Emissions • CU15-M: EN55011 Level B conducted Ripple & Noise • 1% max pk-pk (see note 1) Others: FCC20780 Level B, EN55022 Class B conducted Overvoltage Protection • 130-150% of Vnom, recycle input to reset Short Circuit Protection • Trip and restart (Hiccup mode) ESD Immunity • EN61000-4-2, level 3, Perf Criteria B Radiated Immunity • EN61000-4-3, level 3, Perf Criteria B Temperature • 0.05%/˚C Coefficient EFT/Burst • EN61000-4-4, level 2, Perf Criteria B Surge • EN61000-4-5, level 3, Perf Criteria B Conducted Immunity • EN61000-4-6, 10 V, Perf Criteria B Dips & interruptions • EN61000-4-11, 30% 10 ms, 60% 1000 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals • CU15-M: EN60601, UL2601-1, CSA22.2 No. 601.1 per cUL Others: EN60950, UL1950, CSA22.2 No. 234 per cUL 1 AC-DC AC-DC CU10-20 Models and Ratings Output Output Output Current Model Efficiency (3) (2) Power Voltage Number Nominal Peak 8.25 W 3.3 VDC 2.50 A 3.80 A 65% CU10-00 †* 5.0 VDC 2.00 A 2.80 A 70% CU10-10 †* 9.0 VDC 1.12 A 1.50 A 72% CU10-09 10 W 12.0 VDC 0.84 A 1.20 A 75% CU10-12 †* 15.0 VDC 0.67 A 1.00 A 75% CU10-13 †* 24.0 VDC 0.42 A 0.65 A 78% CU10-14 †* Output Current Output Output Model Efficiency (3) (4) (2) Power Voltage Nominal Number Peak 10 W 3.3 VDC 3.00 A 4.50 A 70% CU15-00 †* 5.0 VDC 3.00 A 4.50 A 73% CU15-10 †* 9.0 VDC 1.67 A 3.00 A 75% CU15-09 15 W 12.0 VDC 1.25 A 1.80 A 80% CU15-12 †* 15.0 VDC 1.00 A 1.50 A 80% CU15-13 †* 24.0 VDC 0.63 A 0.95 A 82% CU15-14 †* Output Output Output Current Model Efficiency (3) (2) Power Voltage Number Nominal Peak 15 W 3.3 VDC 4.40 A 6.60 A 70% CU20-00 †* 5.0 VDC 4.40 A 6.60 A 73% CU20-10 †* 9.0 VDC 2.44 A 4.00 A 77% CU20-09 20 W 12.0 VDC 1.80 A 2.70 A 80% CU20-12 †* 15.0 VDC 1.40 A 2.10 A 80% CU20-13 †* 24.0 VDC 0.92 A 1.40 A 82% CU20-14 †* Notes 1. Measured at 20 MHz bandwidth. 3.3 V models are 50 mV maximum. 3. Alternative output voltages available. Consult sales. 2. Peak load lasting <30 s with a maximum duty cycle of 10%. 4. Medical approved 15 W version available. Add suffix ‘-M’ to part number. † Available from Farnell InOne. (Farnell series ACS10-20) *Available from Newark InOne. Mechanical Details CU10 models CU20 models CU15/CU15-M models 0.07 (1.78) 0.07 (1.78) 0.04 (1.02) 0.15 (3.8) 0.15 (3.8) **Note: CU15-M models 0.04 (1.02) height 0.99 (25.2) 0.13 (3.30) (4 PL) -Vo L -Vo (+) Vout N (-) Vout N N +Vo +Vo L L 0.15 (3.81) 3.20 (81.28) 3.50 (88.90) 0.22 (5.5) 0.157 (4.0) 2.441 (62.0) 2.126 (54.0) 2.75 (69.9) 2.56 (56.0) NOTES: 1. All dimensions shown in inches (mm). 2. CU20 input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. Output connector mates with Molex housing 90-50-3041 and Molex 2878 series crimp terminal. 3. CU20 cable harnesses with 300mm wire available. Order part number CU20 LOOM KIT †. 4. For mating connectors only, order part number CU20-60 CONKIT †. 5. CU20 models only. Covers available. Order part number CU20 COVER † - 4.02” x 2.52” x 1.34” (102 x 64 x 34mm). To receive unit with cover fitted, add suffix ‘-C’ to model number. 11-Aug-05 1.77 (45.0) 0.885 (22.5) 0.196 (5.0) 0.91 (23.0) 0.491 (12.47) 1.28 (32.48) 1.89 (48.0) 0.945 (24.0) 0.157 (4.0) 0.91 (23.0)** 0.492 (12.50) 1.398 (35.51) 2.00 (50.80) 1.70 (43.18) 0.150 (3.81) 0.80 (20.32)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the CU20-12?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods