Manufacturers
WARRICK CONTROLS Series 1
Description
Warrick Controls Series 1 Electromechanical Controls | 2 or 3 Pole Output Contact | Up to 20K Ohms/cm Sensitivity | U.L. “Limit Control” | U.L. “Motor Control”
Part Number
Series 1
Price
Request Quote
Manufacturer
WARRICK CONTROLS
Lead Time
Request Quote
Category
Electromechanical Control Relay
Datasheet
Extracted Text
WARRICK CONDUCTIVITY SENSORS GENERAL PURPOSE CONTROL Series 1 – Electromechanical Controls 2 or 3 Pole Output Contact Up to 20K Ohms/cm Sensitivity U.L. “Limit Control” U.L. “Motor Control” One of Warrick’s fi rst products, Series 1 electromechanical controls offer 2 or 3 pole output contacts with 16 amp rating. These versatile controls can be confi gured for single level service, differential control, low water cutoff (with manual reset or lock out capability) control and many other functions. Specifi cations Contact Design 2 or 3 pole, single throw, electromechanical relay Contact Rating (110 VAC) 16 amp Resistive 1 hp Mode of Operation Direct only Sensitivity 0 - 20K ohm maximum, factory set Applications Primary Voltage 24 VAC, 115 VAC, 230 VAC, 460 VAC, 575 VAC (+10%/-15%) • General Purpose • Boiler Level Control Power Consumption 4 watts (15 VA) * Secondary Voltage 25 VAC, 75 VAC, 150 VAC, 300 VAC, 500 VAC • On/Off Control • Boiler LLCO Temperature -30°F to 130°F • Pump Control Approvals U.L. Rec., FM, CSA, U.L. Listed Limit Control, U.L. 353 Connections All screw type connections * Due to high secondary voltage, if personnel can come in contact with electrodes, Dimensions we suggest using Series 16, 26 or 19 controls. How to Order Use the Bold characters from the chart below to construct a product code. 1 X X X X Series 1 Contact Configuration C – 2 (N.O.), 0 (N.C.) F – 3 (N.O.), 0 (N.C.) D – 1 (N.O.), 1 (N.C.) G – 2 (N.O.), 1 (N.C.) J – 0 (N.O.), 3 (N.C.) E – 0 (N.O.), 2 (N.C.) H – 1 (N.O.), 2 (N.C.) Supply Voltage 1 – 115 VAC 4 – 460 VAC 6 – 115VAC/230VAC 2 – 230 VAC 5 – 575 VAC 7 – 24 VAC Secondary Voltage (Sensitivity) A – 25 (50 Ω) C – 150 (1.5K Ω) E – 500 (20K Ω) B – 75 (450 Ω) D – 300 (7K Ω) Enclosure 0 – None 1 – NEMA 1 4 – NEMA 4 Typical Single Level Wiring Typical Differential Wiring Notes: 1. Load contacts shown are non-powered. 2. Series 1 shown in these diagrams is G confi guration. D-19 D-20 www.gemssensors.com WARRICK CONDUCTIVITY SENSORS
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the Series 1?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods