VMICPCI-5660 CompactPCI 1 Gigabit Fibre Channel Adapter • Supports 100 Mbyte/s communications in all Fibre Channel topologies • Available in two host bus speed versions: — 66 MHz, 64-bit CompactPCI® host bus interface — 33 MHz, 64-bit CompactPCI host bus interface • Compliant with PCI Local Bus specification revision 2.1 • Compliant with ANSI SCSI standards for class 3 service • Compliant with Fibre Channel Arbitrated Loop (FC-AL) Direct Disk Attach and Fibre Channel Public Loop (FC-PL) Fabric Loop Attach profiles • Supports Fibre Channel protocol SCSI (FCP-SCSI) • Supports SCSI initiator/target and target modes (drivers for SCSI initiator only) • On-board, enhanced RISC processor • On-board gigabit serial transceivers Ordering Options • Supports PCI dual-address and cache commands May 31, 2000 800-655660-000 B ABC – D E F • No host intervention required to execute complete SCSI operations VMICPCI-5660 – – • Supports multi-ID aliasing A = Host Bus Clock Speed • Fully backward compatible with 32-bit PCI 0 = 33 MHz CompactPCI bus • Optional copper or fiber-optic interface 1 = 66 MHz CompactPCI bus B = Front Panel Option • Based on QLogic ISP 2100a series chip 0 = 3U Front Panel 1 = 6U Front Panel INTRODUCTION — The VMICPCI-5660 is a C = Transmission Mode 0 = Multimode Fiber-Optic (SC-Type Connectors) single-board, highly integrated Fibre Channel host bus 1 = Twinax (HSSDC) adapter (HBA) targeted at storage area networks (SANs), 2 = Single-Mode Fiber-Optic (SC-Type Connectors) network applications, and computer clustering. The HBA Connector Data connects the CompactPCI bus to a Fibre Channel loop, SC to ST Adapter SC Connector fabric, or to a point-to-point network. The VMICPCI-5660 AMP 503638-1 (or equivalent) AMP 503948-1 (or equivalent) maximizes Fibre Channel throughput while minimizing Cable Specifications transfer latency and host processor overhead. Fiber-Optic Cable - Multimode; (62.5 Micron core); Single-Mode (9 Micron core). Fiber-Optic Cable Assemblies ABC – D E F PRODUCT OVERVIEW — The VMICPCI-5660 is a VMICBL-000-F4 –0 – host bus adapter specifically designed for storage area ABC = Cable Lengths network (SAN) applications. Typical applications include 000 = .5 ft (0.15 m) 011 = 350 ft (106.68 m) enterprise-wide and workgroup configurations which 001 = 1 ft (.31 m) 012 = 500 ft (152.15 m) 002 = 5 ft (1.52 m) 013 = 574 ft (175 m) consolidate hard disk arrays and tape library functions at a 003 = 10 ft (3.04 m) 014 = 656 ft (200 m) central location. Additionally, the VMICPCI-5660 is well 004 = 25 ft (7.62 m) 015 = 820 ft (250 m) 005 = 50 ft (15.24 m) 016 = 1,000 ft (304.30 m) suited for telecom, signal processing, and distributed 006 = 80 ft (24.40 m) 017 = 1,148 ft (350 m) computing applications due to its high network bandwidth. 007 = 100 ft (30.49 m) 018 = 1,312 ft (400 m) 008 = 150 ft (45.72 m) 019 = 1,500 ft (456.45 m) It incorporates a highly integrated, state-of-the-art ASIC 009 = 200 ft (60.98 m) 020 = 1,640 ft (500 m) that contains a 64-bit PCI host interface, an RISC processor, 010 = 250 ft (76.20 m) a Fibre Channel protocol engine, and dedicated transmit and Twinax Cable Assemblies ABC – D E F receive buffers. Three independent DMA channels enable VMICBL-001-33 –0 – commands and data to be processed simultaneously, and the A = 0 (Option reserved for future use) BC = Cable Lengths dedicated frame buffers optimize PCI bus utilization and 00 = Not Used 04 = 5 m 08 = 20 m enable continuous streaming of data during transfer 01 = 0.5 m 05 = 7 m 09 = 25 m 02 = 1 m 06 = 10 m 10 = 30 m operations. Simultaneous SCSI I/O commands are 03 = 3 m 07 = 15 m completely executed without host system intervention; no HSSDC-to-HSSDC Cable Assemblies ABC – D E F more than one system interrupt is generated per complete VMICBL-001-36 – – SCSI I/O. The highly integrated design promotes high 003 = 3 m, 30 AWG, without Equalizers reliability, low power consumption, and low cost. 310 = 10 m, 22 AWG, with Equallizers 325 = 25 m, 22 AWG, with Equallizers Software Support: Linux, Windows NT®, (All other options not shown above are reserved for future use.) VxWorks, Solaris x86 (SCSI initiator), and many Twinax Adapters others. See the Fibre Channel products area of HSSDC-to-DB9 Adapter P/N VMICBL-001-34-000 DB9-to-DB9 Splitter Cable P/N VMICBL-001-35-001 www.vmicnet.com for the complete listing and latest See attached topology/cable configuration guide for application of these adapters. information regarding software driver support. For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 TECHNICAL SPECIFICATIONS E-mail: info@vmic.com Web Address: www.vmic.com Copyright © October 1999 by VMIC Fibre Channel Transfer Rate: 100 Mbyte/s Specifications subject to change without notice. VMIC • 12090 South Memorial Parkway • Huntsville, Alabama 35803-3308 1 VMICPCI-5660 Fiber optic (multimode) with SC-type connectors Host Bus Transfer Rate: 64-bit bus master DMA (maximum distance - 500 m) maximum burst data transfers up to 264 Mbyte/s (PCI - 64/33 MHz) Fiber optic (single-mode) with SC-type connectors (maximum distance - 10 km) Host Bus Signaling: Supports 5 or 3 V signaling On-Board RAM: 128 Kbyte static RAM TRADEMARKS PHYSICAL/ENVIRONMENTAL The VMIC logo is a registered trademark of VMIC. Temperature Range: 0 to 50 ˚C, operating Windows NT is a registered trademark of Microsoft -40 to 70 ˚C, storage Corporation. Other registered trademarks are the property of their respective owners. Relative Humidity: 20 to 80 percent, noncondensing Power Requirements: 1 A (maximum) 5 VDC Network Connections: Twinax with HSSDC connector (maximum distance - 30 m) 566x HBA 566x HBA SC-Type Fiber-Optic Cable (VMICBL-000-F4-xxx) To TX from RX From RX to TX SC-Type Multimode Fiber-Optic Cable Configuration 566x HBA 566x HBA DB9-to-DB9 Cable HSSDC to DB9 HSSDC to DB9 (VMICBL-001-33-xxx) (VMICBL-001-34-000) Component Side Solder Side Twinax Two-Node Configuration 566x HBA 566x HBA HSSDC to DB9 VMICBL-001-33-xxx HSSDC to DB9 (VMICBL-001-34-000) DB9 Splitter DB9-to-DB9 Cable VMICBL-001-33-xxx (VMICBL-001-35-001) (VMICBL-001-33-xxx) HSSDC to DB9 566x HBA Twinax Multinode (FC-AL) Configuration Figure 1. Fibre Channel Topology/Cable Configuration Guide 2 For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859